Moen MotionSense Wave Touchless Pulldown Kitchen Faucet Instruction Manual

1. Producte acabatview

The Moen MotionSense Wave Touchless Pulldown Kitchen Faucet combines modern design with advanced functionality for a convenient kitchen experience. This faucet features hands-free activation, a pull-down spray wand with Power Clean technology, and a Spot Resist Stainless finish.

Característiques principals:

• Activació sense contacte de MotionSense Wave: Allows for hands-free operation by simply waving your hand.
• Pulldown Spray Wand: Provides flexibility and extended reach for various tasks.
• Tecnologia de polvorització Power Clean: Delivers a more concentrated spray for faster cleaning.
• Sistema reflex: Ensures smooth operation and secure docking of the spray wand.
• Acabat inoxidable resistent a les taques: Resists fingerprints and water spots, simplifying cleaning.
• Disseny d'una sola nansa: For easy temperature and flow control.
• Muntatge en un sol forat: Dissenyat per a una instal·lació senzilla.

Image 1.1: Moen MotionSense Wave Touchless Pulldown Kitchen Faucet with deck plate and soap dispenser.

2. Informació de seguretat

Please read all instructions carefully before installation and use. Failure to follow these instructions could result in property damage or personal injury.

• Tanqueu sempre el subministrament principal d'aigua abans de començar qualsevol instal·lació o manteniment.
• Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites.
• Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un lampista qualificat.
• The faucet requires batteries for touchless operation. Ensure batteries are installed correctly and replaced when necessary to maintain functionality.
• Keep the sensor area clear of obstructions to prevent unintended activation.

3. Configuració i instal·lació

This faucet is designed for single-hole deck mount installation. It can be installed with or without the included deck plate.

Eines necessàries (no incloses):

• Clau ajustable
• Tornavís Phillips
• Massilla de lampista o segellador de silicona
• Llanterna
• Cubell
• Tovalloles

Passos d'instal·lació:

1. Preparar la pica: Turn off the water supply at the main shut-off valves. Clear the area under the sink. Remove any existing faucet.
2. Instal·leu la placa de la coberta (opcional): If using the deck plate, apply plumber's putty or silicone sealant around the underside edge of the deck plate and place it over the sink holes.
3. Muntar l'aixeta: Insert the faucet body through the center hole in the sink (and deck plate, if used). From underneath the sink, secure the faucet with the provided mounting hardware (washer and mounting nut). Tighten securely.
4. Connecteu les línies de subministrament d'aigua: Connect the hot and cold water supply lines from the faucet to your home's hot and cold water valves. Ensure connections are tight but do not overtighten.
5. Instal·leu el dispensador de sabó: Insert the soap dispenser through its designated hole. Secure from underneath with the provided nut. Fill with liquid soap.
6. Instal·leu la bateria: The touchless feature requires power. Install the specified batteries into the battery pack. Secure the battery pack in an accessible location under the sink, away from direct water exposure.
7. Connect Sensor Cable: Connect the sensor cable from the faucet to the control box/battery pack.
8. Prova de fuites: Slowly turn on the main water supply. Check all connections for leaks. Run the faucet (both manual and touchless) to ensure proper operation and flush out any debris.

Image 3.1: Faucet with pull-down spray wand extended, illustrating hose flexibility.

4. Instruccions de funcionament

The Moen MotionSense Wave faucet offers both touchless and manual operation.

4.1 Touchless Activation (MotionSense Wave)

• To activate water flow, wave your hand approximately 1-2 inches in front of the sensor located on the side of the faucet base.
• Wave your hand again to turn off the water.
• The water temperature for touchless activation is set by the position of the manual handle. Adjust the handle to your desired temperature before using the touchless feature.
• The touchless feature will automatically shut off after a period of inactivity to conserve water and battery life.

4.2 Funcionament manual

• To operate manually, use the single handle on the side of the faucet.
• Lift the handle to turn on the water and control flow rate.
• Mou la maneta cap a l'esquerra per a aigua calenta i cap a la dreta per a aigua freda.
• Premeu la maneta cap avall per tancar l'aigua.

4.3 Pulldown Spray Wand

• Gently pull down the spray wand from the faucet spout.
• Press the button on the spray wand to switch between stream and Power Clean spray modes.
• When finished, guide the spray wand back into the spout. The Reflex system ensures it docks securely.

Image 4.1: Demonstrating manual operation and water flow from the faucet.

5. Manteniment

Regular maintenance will ensure the longevity and optimal performance of your faucet.

5.1 Neteja de l'aixeta

• The Spot Resist Stainless finish is designed to resist fingerprints and water spots.
• Netegeu l'aixeta regularment amb un drap suauamp drap i sabó suau.
• Eviteu netejadors abrasius, productes químics agressius o fregalls, ja que poden danyar l'acabat.
• For stubborn water spots, a solution of equal parts white vinegar and water can be used, followed by rinsing and drying.

5.2 Substitució de la bateria

• The touchless feature is powered by batteries located in a battery pack under the sink.
• When batteries are low, the faucet may exhibit reduced sensor responsiveness or a chirping sound.
• To replace batteries, locate the battery pack, open it, and replace all old batteries with new ones of the specified type (typically AA or D batteries, refer to the battery pack for exact type).
• Ensure correct polarity when inserting new batteries.
• After replacing batteries, the system may need a moment to reset.

6. Solució De Problemes

Si teniu problemes amb l'aixeta, consulteu els següents problemes i solucions habituals:

• Sense flux d'aigua (sense contacte):
  • Check if the manual handle is in the OFF position.
  • Ensure the water supply valves are fully open.
  • Verify that the battery pack has fresh batteries and is properly connected.
  • Clean the sensor area to ensure no obstructions.
• No Water Flow (Manual):
  • Check if the main water supply is on.
  • Ensure the hot and cold water supply lines are not kinked or blocked.
• Pressió d'aigua feble:
  • Check if the aerator is clogged. Unscrew the aerator from the spray wand and clean any debris.
  • Assegureu-vos que les vàlvules de subministrament d'aigua estiguin completament obertes.
• Flickering or Unintended Activation:
  • Ensure the sensor area is clean and free from reflective surfaces or objects.
  • Avoid placing objects too close to the sensor.
• Chirping Sound:
  • This typically indicates low batteries. Replace the batteries in the battery pack.
• Spray Wand Does Not Retract Fully:
  • Check for obstructions under the sink that might be interfering with the hose and weight.
  • Ensure the weight on the hose is positioned correctly.

If problems persist after troubleshooting, contact Moen customer support.

7. Especificacions

8. Garantia i Suport

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Moen weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Informació de contacte:

• Fabricant: Moen
• For specific support, visit www.moen.com o contactar amb la seva línia d'atenció al client.