Pipishell TV Wall Mount Instruction Manual

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Designed for most 26-65 inch LED, LCD, OLED, and 4K TVs weighing up to 99lbs, this mount offers full motion articulation, swivel, tilt, and leveling capabilities for an optimized viewing experience. Please read this manual thoroughly before installation to ensure safe and correct usage.

Image: The Pipishell Full Motion TV Wall Mount, showcasing its robust design, articulating arms, and included accessories like a small level and cable ties.

Configuració i instal·lació

The Pipishell TV Wall Mount is designed for straightforward installation. Ensure you have all necessary tools and hardware before beginning. This mount is compatible with 16/12/8 inch wood studs, concrete, or brick walls. WARNING: Do not mount on drywall alone.

Comprovació de compatibilitat

• Mida del televisor: Fits most 26-65 inch TVs.
• Capacitat de pes: Supports TVs up to 99lbs.
• Patrons VESA: Compatible with VESA mounting hole patterns from 100x100mm to 400x400mm. Verify your TV's VESA pattern before proceeding.

Image: Visual guide illustrating the maximum weight capacity (99 lbs) and compatible TV sizes (26-65 inches), along with various VESA mounting patterns supported by the mount.

Image: Depiction of the TV mount's compatibility with three different wall types: wood studs (12"/16"), concrete wall, and block wall, with a warning not to install on drywall alone.

Passos d'instal·lació (més enllà)view)

1. Secure Brackets to TV: Attach the TV brackets to the back of your television using the provided hardware. Ensure the correct screw length and spacers are used for your specific TV model.
2. Install the Wall Plate/Arm: Mount the wall plate assembly to your chosen wall type (wood studs, concrete, or brick) using appropriate tools and fasteners. A stud finder is recommended for wood stud installations.
3. Penjar la televisió: Carefully lift and hang the TV (with attached brackets) onto the wall plate. Secure the TV to the mount using the locking mechanisms.

Image: An infographic promoting a 15-minute installation time, emphasizing the mount's one-piece design, clear instructions, complete hardware, and US-based support.

Operating Your TV Mount

Your Pipishell Full Motion TV Wall Mount allows for various adjustments to achieve the perfect viewing angle from anywhere in the room.

Ajustaments:

• Inclinació: Adjust the vertical tilt from +5 to -15 degrees to reduce glare and find your ideal viewangle de ing.
• Girar: Swivel the TV +/-45 degrees left to right to customize your viewing experience across multiple areas.
• Nivell: Fine-tune the TV's position by adjusting the level +/-3 degrees after installation.
• Extensió/Retracció: Extend the TV up to 15.34 inches from the wall for viewing or collapse it to a slim 3.98 inches for a clean, space-saving look.

Image: A visual representation of the mount's flexibility, showing its ability to level (±3°), tilt (+5°/-15°), extend (15.34"), and retract (3.98").

Image: A TV mounted on the wall, swiveled to the side, demonstrating the mount's ability to provide optimal viewing from various positions in a room.

Imatge: Un professional lateralfile view of the TV mount, illustrating its extension (15.34") and retraction (3.98") capabilities, as well as the tilt range from -15° to +5°.

Manteniment

To ensure the longevity and safe operation of your TV wall mount, regular maintenance is recommended:

• Neteja: Netegeu el suport amb un drap suau i sec per eliminar la pols. Eviteu netejadors o dissolvents abrasius.
• Inspeccions: Periodically check all screws and bolts to ensure they are securely tightened. Over time, vibrations or adjustments may cause them to loosen.
• Lubricació: If the articulating arms become stiff, apply a small amount of silicone-based lubricant to the moving joints.

Resolució de problemes

If you encounter any issues with your Pipishell TV Wall Mount, please refer to the following common solutions:

• El televisor no està anivellat: Use the leveling adjustment feature (+/-3 degrees) to fine-tune the TV's horizontal position. Ensure the wall plate itself is level during installation.
• La muntura se sent fluixa: Re-tighten all mounting bolts on the wall plate and the screws securing the brackets to the TV. Ensure the mount is properly anchored to studs or concrete/brick.
• Dificultat per moure els braços: Check for any obstructions. If the joints are stiff, apply a silicone-based lubricant. Do not force the arms.
• TV compatibility issues: Double-check your TV's VESA pattern and weight against the mount's specifications. If they do not match, the mount may not be suitable for your TV.

For further assistance, please contact Pipishell support.

Especificacions

Informació de la garantia

Pipishell products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact customer support for specific warranty terms and conditions.

Atenció al client

For technical support, troubleshooting assistance, or any questions regarding your Pipishell TV Wall Mount, please contact our support team:

• Correu electrònic: supportus@pipishell.net (US/CA)
• Weblloc: www.pipishell.com

Our support team is always at your service.