Introducció
Thank you for choosing the PERLESMITH Full Motion TV Wall Mount. This manual provides detailed instructions for the safe and proper installation and use of your new TV wall mount. Please read this manual thoroughly before installation and retain it for future reference.
This full motion TV mount is designed for most 26-55 inch TVs weighing up to 70 lbs, with VESA patterns ranging from 100x100mm to 400x400mm.
Informació important de seguretat
WARNING: Failure to read and understand all instructions may result in serious personal injury, property damage, or voiding of warranty. Improper installation can lead to the TV falling, causing serious injury.
- Do not begin installation until you have read and understood all instructions and warnings contained in this installation sheet.
- Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
- This TV mount is designed for installation on single wood studs, solid concrete, or brick walls. Do not install on drywall alone.
- Feu servir sempre un localitzador de muntants de fusta per localitzar-los amb precisió.
- Use appropriate safety gear and tools for installation.
- If you have any questions, please contact PERLESMITH customer support.
Contingut del paquet
Verify that all components are present and undamaged. If any parts are missing or defective, contact PERLESMITH customer support for assistance.
Image showing the PERLESMITH TV Wall Mount and included accessories like the level and cable ties.
Maquinari inclòs:
- Muntatge de la placa de paret
- Suports de TV (2)
- Maquinari de muntatge (diversos cargols, volanderes, separadors per a TV i paret)
- Nivell de bombolla
- Brides de cable
- Manual d'instruccions
Especificacions
| Característica | Detall |
|---|---|
| Número de model | PSMFK7 |
| Mides de TV compatibles | 26-55 polzades |
| Capacitat de pes | Fins a 70 lliures |
| Compatibilitat VESA | 100x100mm a 400x400mm |
| Ajust d'inclinació | +5°/-15° |
| Ajust giratori | +/-90° |
| Ajust de nivell | +/-3° |
| Extensió des de la paret | 3.2 polzades (retret) a 19.17 polzades (estès) |
| Material | Acer d'aliatge |
This diagram illustrates the compatible TV sizes (26-55 inches), maximum weight capacity (70 lbs), and VESA mounting patterns (Max 400x400mm, Min 100x100mm).
Configuració i instal·lació
Before you begin, ensure you have all necessary tools and that your wall type is suitable for this mount. This mount is designed for single wood stud, solid concrete, or brick walls. It is not for drywall-only installation.
Step 1: Verify TV Compatibility
Check your TV's weight, size, and VESA pattern. The mount supports TVs from 26 to 55 inches, up to 70 lbs, and VESA patterns from 100x100mm to 400x400mm.
Pas 2: connecteu els suports del televisor al televisor
Carefully place your TV face down on a soft, clean surface to prevent scratches. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are centered and securely fastened.
A person is shown attaching the pre-assembled arm of the mount to the back of a TV, demonstrating the easy installation process.
Pas 3: Instal·leu la placa de paret a la paret
Determine the desired height for your TV. Use a stud finder to locate the center of a wood stud if mounting to wood. Mark the drilling locations. For concrete or brick walls, use a masonry drill bit and anchors (not included for concrete/brick, but standard hardware is provided for wood stud). Ensure the wall plate is level using the included bubble level.
This image displays the wall mount securely installed on a wall, highlighting its robust construction and readiness for TV attachment.
Un costat view of the wall mount installed, emphasizing its articulating arm design for flexible positioning.
Another perspective of the wall mount, showcasing its compact profile when retracted against the wall.
Pas 4: Pengeu el televisor a la placa de paret
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate. Fasten any safety screws or locking mechanisms as per the detailed instructions in the included manual.
Video demonstrating the swivel and tilt capabilities of the PERLESMITH TV wall mount for 26-55 inch TVs. This video shows the mount's flexibility in adjusting the viewangle de ing.
Projecció de vídeoasing the swivel function of the PSMFK7 TV Wall Mount when installed on a wall. This demonstrates how the TV can be easily repositioned.
Instruccions de funcionament
Once your TV is securely mounted, you can adjust its position for optimal viewing.
This image illustrates the various adjustments possible with the mount: tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.
Ajust d'inclinació:
To adjust the tilt angle (+5°/-15°), loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure the position.
Ajust de gir:
The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewing angle. The mount is designed to perfectly center your TV when pushed back to the wall.
This image demonstrates how the mount allows for perfect centering of your TV, shown here above a fireplace.
This image illustrates the mount's capability for corner mounting, providing flexible placement options.
Ajust de nivell:
After installation, you can make minor level adjustments of +/-3° to ensure your TV is perfectly horizontal.
Extensió i retracció:
Extend the TV up to 19.17 inches from the wall for viewing or retract it back to 3.2 inches for a clean, streamlined look.
Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Comproveu periòdicament les connexions: Every few months, check that all screws and bolts are securely tightened. Over time, vibrations or adjustments can cause fasteners to loosen.
- Clean the Mount: Wipe the mount with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents that could damage the finish.
- Inspeccionar el desgast: Look for any signs of wear, damage, or corrosion on the mount components. If any issues are found, contact customer support immediately.
- Lubricació: Les juntes articulades estan dissenyades per a un moviment suau. Si el moviment es torna rígid, es pot aplicar una petita quantitat de lubricant a base de silicona als punts de pivot.
Resolució de problemes
Si teniu algun problema durant o després de la instal·lació, consulteu els problemes i solucions habituals següents.
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | La placa de paret o els suports del televisor no estan perfectament anivellats. | Use the +/-3° level adjustment feature to fine-tune the TV's horizontal position. If significant, re-check wall plate installation with a level. |
| Mount feels loose or wobbly. | Screws are not fully tightened; wall anchors are not secure; wall material is insufficient. | Ensure all wall and TV attachment screws are tightened. Verify wall type and stud location. If unsure, consult a professional. |
| El televisor no encaixa amb el suport. | Incorrect VESA pattern or TV weight/size exceeds capacity. | Verify your TV's VESA pattern, weight, and size against the mount's specifications (100x100mm to 400x400mm, up to 70 lbs, 26-55 inches). |
| Mounting screws for TV are incorrect size. | TV requires a specific screw size not included in the standard kit. | The kit includes M4, M6, and M8 screws. If your TV requires a different size (e.g., M5), you may need to purchase it separately. |
Garantia i assistència al client
PERLESMITH TV mount products are manufactured to high standards to ensure maximum value and performance. We stand behind the quality of our products.
For any questions regarding installation, product selection, or warranty claims, please contact our U.S.-based customer support team. We are committed to providing excellent service and support.
Informació de contacte:
- Weblloc: www.perlesmith.com
- Correu electrònic: suport@perlesmith.com
- Telèfon: (Consulteu l'embalatge del producte o weblloc web per al número de telèfon actual)
Please have your model number (PSMFK7) and purchase date ready when contacting support.
