PATPET 321A Dog Training Collar User Manual

Introducció

This manual provides comprehensive instructions for the safe and effective use of your PATPET 321A Dog Training Collar. Please read this manual thoroughly before operating the device to ensure proper training and the well-being of your dog.

Contingut del paquet

• Transmissor remot
• Collar receptor
• Coll de niló ajustable
• Cable de càrrega USB
• Eina de prova de llum
• Punts de contacte (curts i llargs)
• Manual d'usuari

Característiques clau

• 3 modes d'entrenament: Beep, Vibration (1-8 levels), and Static Stimulation (1-16 levels).
• 1000ft Remote Range: Effective control over a significant distance.
• IPX7 Waterproof Receiver: Suitable for use in wet conditions and water activities.
• Bateria de llarga durada: Remote up to 66 days, Receiver up to 11 days on a single charge.
• Coll ajustable: Fits neck sizes 7.8" - 27", suitable for dogs 15 to 100 lbs.

Image: The PATPET 321A remote transmitter and receiver collar, showcasing the device's design and components.

Informació de seguretat

• Important: Aquest dispositiu no és una joguina. Mantenir fora de l'abast dels nens.
• Do not use this collar on aggressive dogs.
• Avoid leaving the collar on the dog for more than 12 hours per day to prevent skin irritation.
• Regularly check the contact area for signs of irritation or sores. If found, discontinue use until the skin heals.
• Always start with the lowest stimulation level and gradually increase if necessary.
• Ensure proper fit; the collar should be snug but not overly tight.

Configuració

1. Càrrega dels dispositius

Before first use, fully charge both the remote transmitter and the receiver collar.

1. Connect the USB charging cable to the charging ports on both the remote and receiver.
2. Plug the other end of the USB cable into a standard USB power adapter (not included).
3. The indicator lights will show charging status (refer to device indicators for specific colors/patterns).
4. Charging typically takes 2-3 hours. Disconnect once fully charged.

2. Attaching the Contact Points

Select the appropriate contact points (short for short-haired dogs, long for long-haired dogs) and screw them onto the receiver collar.

3. Col·locació del collar receptor

1. Place the receiver collar around your dog's neck so that the contact points touch the skin.
2. Adjust the strap to ensure a snug fit. You should be able to fit one finger snugly between the collar and your dog's neck.
3. If the collar is too loose, the stimulation may not be consistent. If too tight, it can cause skin irritation.
4. Trim any excess collar strap if necessary, ensuring the cut end is sealed to prevent fraying.

Image: A visual guide demonstrating the correct fitting of the adjustable nylon collar on a dog, including how to trim excess material for a proper fit.

Instruccions de funcionament

1. Encendre/apagar

• Remot: Press and hold the power button until the screen illuminates. Press and hold again to turn off.
• Receptor: Press and hold the power button until the indicator light flashes. Press and hold again to turn off.

2. Emparellar el comandament a distància i el receptor

The devices are usually pre-paired. If not, or if you need to re-pair:

1. Ensure both devices are off.
2. Enceneu el comandament a distància.
3. Press and hold the receiver's power button until the indicator light flashes rapidly.
4. Within 10 seconds, press any mode button (Beep, Vibration, or Static) on the remote.
5. A successful pairing will be indicated by a solid light on the receiver and a confirmation on the remote's screen.

3. Selecting Training Modes

The PATPET 321A offers three training modes:

• Mode bip: Delivers an audible tone. Use for warning or positive reinforcement.
• Mode de vibració: Delivers a non-harmful vibration. Adjustable from 1-8 levels.
• Mode d'estimulació estàtica: Delivers a static pulse. Adjustable from 1-16 levels. Use with caution and at the lowest effective level.

Image: An illustration detailing the three available training modes: Beep, Vibration (1-8 levels), and Static Stimulation (1-16 levels), highlighting their distinct functions.

4. Adjusting Intensity Levels

Use the up/down buttons on the remote to adjust the intensity levels for Vibration and Static Stimulation modes. Always start at the lowest level and observe your dog's reaction.

5. Testing the Static Stimulation

Use the provided test light tool to verify the static stimulation function:

1. Place the test light tool over the contact points on the receiver.
2. Select Static Stimulation mode on the remote and press the stimulation button.
3. The test light will illuminate, indicating the static function is working.

Manteniment

• Neteja: Netegeu el comandament a distància i el receptor amb anuncisamp tela. No utilitzeu productes químics durs.
• Punts de contacte: Regularly check and clean the contact points to ensure good skin contact.
• Cura de la bateria: Charge the devices fully before long periods of inactivity. Store in a cool, dry place.
• Corretja del coll: Inspect the nylon strap for wear and tear. Replace if damaged.

Resolució de problemes

• El dispositiu no s'encén: Assegureu-vos que els dispositius estiguin completament carregats.
• Cap resposta del receptor:
  • Check if the receiver is turned on.
  • Verify that the remote and receiver are paired.
  • Ensure the remote battery is not low.
  • Check the remote range; move closer to the dog.
• Static stimulation not working:
  • Use the test light tool to confirm functionality.
  • Ensure contact points are making proper contact with the dog's skin.
  • Increase the static level gradually.
• Irritació de la pell:
  • Remove the collar immediately.
  • Clean the dog's neck and the contact points.
  • Allow the skin to heal completely before re-applying.
  • Ensure proper collar fit and do not leave on for extended periods.

Especificacions

Image: The remote and receiver units of the PATPET 321A, illustrating their respective battery life durations.

Image: A dog wearing the PATPET 321A collar, shown near water, highlighting the IPX7 waterproof capability of the receiver.

Image: A hand holding the PATPET 321A remote transmitter, with a dog in the distance, visually representing the 1000ft remote control range.

Garantia i Suport

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official PATPET weblloc. Conserveu el rebut de compra per a reclamacions de garantia.