Ortis Wireless Light Switch and Receiver Kit (Model HAS-02) Instruction Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Ortis Wireless Light Switch and Receiver Kit. This kit offers a flexible and convenient solution for controlling lights and fans without the need for traditional wiring, enhancing safety and energy efficiency in your home.

The kit includes a wireless wall switch and a receiver unit. The wireless switch communicates with the receiver using radio frequency (RF) signals, allowing for versatile placement and control.

Característiques clau

• 300ft Wireless Remote Range: Operates without Wi-Fi, utilizing powerful RF signals that can penetrate walls and doors.
• Programable i ampliable: Supports various configurations including one switch controlling one lamp, multiple switches controlling one lamp, or one switch controlling multiple lamps.
• No es necessita cablejat: Eliminates the need for complex rewiring, saving time and reducing wall damage. The switch matches traditional standard panel designs.
• Fàcil instal·lació: Includes a mounting bracket for flexible placement. The detachable switch can also function as a portable remote control.
• Aplicació àmplia: Compatible with various light types such as incandescent, halogen, fluorescent, and CFL. Suitable for controlling indoor lighting and fans.

Informació de seguretat

Si us plau, llegiu totes les instruccions de seguretat abans de la instal·lació i l'ús. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o altres perills.

• Desconnexió d'alimentació: Always cut off power at the circuit breaker before installing or servicing any electrical components.
• Personal qualificat: Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un electricista qualificat.
• Límits de càrrega: Do not exceed the maximum load capacity of the receiver (10A / 1200W; 1000W Tungsten / 600W Fluorescent).
• Només per a ús interior: Aquest dispositiu està dissenyat per a ús interior en llocs secs.
• Seguretat de la bateria: The wireless switch uses a battery. Ensure correct polarity when replacing, and dispose of used batteries responsibly.

Guia d'instal·lació

1. Cablejat del receptor

The receiver unit connects directly to your light fixture or fan. Ensure power is OFF at the circuit breaker before proceeding.

Descripció de la imatge: A clear wiring diagram illustrating the connection of the Ortis RF Controller (receiver) to a power input and a lamp. The diagram shows the input wires (White for Neutral, Black for Live) and output wires (White for Neutral, Black for Live) connecting to the lamp. A warning "Please cut off power before installation" is visible on the receiver unit.

1. Desconnecteu l'alimentació: Turn off the main power supply to the circuit at your electrical panel.
2. Identificar els cables: Locate the Live (L) and Neutral (N) wires from your power source and the Live (L) and Neutral (N) wires leading to your light fixture/fan.
3. Entrada de connexió: Connect the Live (Black) wire from your power source to the 'L' input terminal on the receiver. Connect the Neutral (White) wire from your power source to the 'N' input terminal on the receiver.
4. Connexió de sortida: Connect the Live (Black) wire leading to your light fixture/fan to the 'L' output terminal on the receiver. Connect the Neutral (White) wire leading to your light fixture/fan to the 'N' output terminal on the receiver.
5. Connexions segures: Ensure all wire connections are secure using appropriate wire connectors.
6. Receptor de muntatge: Place the receiver unit inside the electrical box or fixture canopy, ensuring it does not obstruct any moving parts or ventilation.

2. Wireless Switch Installation

The wireless switch can be mounted on a wall or used as a portable remote.

Descripció de la imatge: A multi-panel image showing the installation process of the wireless switch. Panel 1 shows attaching a mounting plate to a wall with screws. Panel 2 shows the switch unit being attached to the mounting plate. Panel 3 shows the completed switch assembly on the wall. A separate inset shows the battery compartment with a 23A 12V battery and the dimensions of the switch (4.5 in x 2.7 in) and receiver (2.6 in x 1.4 in).

1. Tria la ubicació: Select a desired location for your wireless switch. This can be any flat surface.
2. Suport de muntatge: Use the provided screws to attach the mounting bracket to the wall.
3. Connecteu l'interruptor: Snap the wireless switch onto the mounted bracket. The switch can be easily detached for portable use.
4. Instal·lació de la bateria: The switch comes with a pre-installed battery (23A 12V). Ensure it is correctly seated.

Descripció de la imatge: A visual comparison showing "NO WIRING NEEDED" for the wireless switch on the left, with the receiver hidden in the ceiling fixture and the switch placed on the wall without visible wires. On the right, a "Traditional Switch" is shown with red and blue lines indicating extensive wiring within the wall to a ceiling fixture.

Operation and Pairing

1. Initial Pairing (if needed)

Your switch and receiver are typically pre-paired from the factory. If they are not responding or if you are adding new components, follow these steps:

1. Restaura l'alimentació: Turn on the main power supply to the circuit at your electrical panel.
2. Introduïu el mode de vinculació: Press and hold the pairing button on the receiver unit for approximately 3 seconds until the indicator light starts flashing.
3. Activa l'interruptor: Within 10 seconds of the indicator light flashing, press any button on the wireless switch. The indicator light on the receiver will stop flashing, indicating successful pairing.
4. Prova: Press the wireless switch to confirm it controls the connected light/fan.

2. Funcionament bàsic

Once paired, simply press the rocker switch to turn the connected light or fan ON or OFF. The switch operates in an ON-OFF-ON mode.

Descripció de la imatge: A collage showing three common uses for the kit: moving a switch to a new location, adding a wall switch to a pull chain light, and replacing a current switch. Each scenario is depicted with an illustrative image.

3. Advanced Configurations (Programmable and Expandable)

The Ortis Wireless Kit supports flexible control schemes:

• One Switch Controls One Lamp: Standard configuration.
• Multiple Switches Control One Lamp: Pair multiple wireless switches to a single receiver. This allows for 3-way or multi-location control.
• One Switch Controls Multiple Lamps: Pair a single wireless switch to multiple receivers. This allows one switch to control several lights simultaneously.

Descripció de la imatge: A diagram showing three scenarios: "Multi switches control a lamp" (two switches linked to one receiver/lamp), "One switch control a lamp" (one switch linked to one receiver/lamp), and "One switch control multi lamps" (one switch linked to two receivers/lamps). The diagram also highlights the "300ft RF Range" with signals passing through walls.

Descripció de la imatge: An image depicting a living room with multiple light fixtures. A single Ortis wireless switch on the wall is shown sending a signal to a receiver, which then controls the lights, demonstrating the "one switch control multi lamps" capability.

Manteniment

Canvi de bateria

The wireless switch is powered by a 23A 12V battery. When the switch's performance degrades or it stops responding, it may be time to replace the battery.

1. Treure l'interruptor: Gently detach the wireless switch from its mounting bracket.
2. Obre el compartiment de la bateria: Locate the battery cover on the back of the switch and open it.
3. Substituïu la bateria: Remove the old 23A 12V battery and insert a new one, ensuring correct polarity (+ and -).
4. Compartiment tancat: Tanqueu de manera segura la tapa de la bateria.
5. Reattach Switch: Snap the switch back onto its mounting bracket.

Elimineu les piles velles d'acord amb la normativa local.

Resolució de problemes

Especificacions

Vídeos oficials de productes

No s'han trobat vídeos oficials de productes del venedor a les dades proporcionades.

Garantia i Suport

Specific warranty information and direct support contact details were not provided in the product data. Please refer to the product packaging or the manufacturer's official weblloc web per conèixer els termes de garantia i les opcions d'atenció al client més actualitzades.