Instruccions importants de seguretat
Llegiu i comprengueu sempre tots els avisos de seguretat, instruccions, il·lustracions i especificacions que s'inclouen amb aquesta eina elèctrica. Si no seguiu totes les instruccions que s'indiquen a continuació, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
- Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. Les zones desordenades o fosques poden provocar accidents. No utilitzeu eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
- Seguretat elèctrica: Els endolls de les eines elèctriques han de coincidir amb la presa de corrent. No modifiqueu mai l'endoll de cap manera. Eviteu el contacte corporal amb superfícies connectades a terra, com ara canonades, radiadors, fogons i neveres.
- Seguretat personal: Porteu sempre protecció ocular. Utilitzeu equips de protecció individual com ara màscares antipols, calçat de seguretat antilliscant, cascs o protecció auditiva quan sigui necessari. Eviteu l'arrencada accidental. Assegureu-vos que l'interruptor estigui en la posició d'apagada abans de connectar la bateria, agafar o transportar l'eina.
- Ús i cura de les eines elèctriques: No forceu l'eina elèctrica. Feu servir l'eina elèctrica correcta per a la vostra aplicació. No feu servir l'eina elèctrica si l'interruptor no l'encén ni l'apaga. Desconnecteu la bateria de l'eina elèctrica abans de fer cap ajust, canviar accessoris o guardar eines elèctriques.
- Ús i cura de l'eina de la bateria: Recarregar només amb el carregador especificat pel fabricant. Utilitzar eines elèctriques només amb bateries específicament designades. Quan la bateria no estigui en ús, mantenir-la allunyada d'altres objectes metàl·lics.
- Servei: Feu que una persona de reparació qualificada faci reparar la vostra eina elèctrica que utilitzi només peces de recanvi idèntiques. Això garantirà que es mantingui la seguretat de l'eina elèctrica.
Producte acabatview
The Einhell TE-CD 18/2 Li +39 is a versatile cordless drill/driver designed for various drilling and screwing tasks. It is part of the Power X-Change family, allowing for interchangeable battery use across a wide range of Einhell tools. This model features a robust motor, two-speed gearing, and electronic speed control for precise operation.
Figura 1: The Einhell TE-CD 18/2 Li +39 Cordless Drill/Driver, including the Power X-Change battery, rapid charger, and a comprehensive 39-piece accessory set for various applications.
Figura 2: The drill/driver, battery, charger, and accessory bits neatly organized within the included durable carrying case, ensuring easy transport and storage.
Figura 3: An illustrative diagram showcasing the extensive compatibility of the Einhell Power X-Change battery system, highlighting how one battery can power numerous tools.
Configuració
Carregant la bateria
Before first use, fully charge the battery. Insert the battery pack into the rapid charger. The charger's indicator light will show the charging status. Once fully charged, remove the battery from the charger.
Col·locació i extracció de la bateria
To attach the battery, slide it onto the base of the drill/driver until it clicks securely into place. To remove, press the release buttons on the sides of the battery pack and slide it off.
Installing Drill Bits and Accessories
The drill/driver features a keyless chuck for quick and easy bit changes. To install a bit:
- Rotate the chuck counter-clockwise until the jaws are open wide enough to insert the bit.
- Insert the drill bit or accessory into the chuck.
- Gireu el mandril en sentit horari per estrènyer fermament les mordasses al voltant de la broca. Assegureu-vos que la broca estigui centrada i fixada.
Figura 4: Icon indicating the drill/driver's capability for both drilling and screwing applications.
En funcionament
Engegada/Apagada i Control de Velocitat
The drill/driver is activated by pressing the trigger switch. The speed is controlled by the amount of pressure applied to the trigger; pressing it further increases the speed. Release the trigger to turn off the tool.
Figura 5: Un primer pla view of the ergonomic trigger, which allows for variable speed control based on pressure.
Figura 6: Icon representing the electronic speed control feature, enabling precise adjustment of rotation speed.
Ajust dels paràmetres de parell de torsió
The torque setting ring, located behind the chuck, allows you to adjust the amount of rotational force. Select a lower torque setting for driving small screws into soft materials and a higher setting for larger screws or harder materials. The drill mode bypasses the clutch for maximum power when drilling.
Figura 7: Icon indicating the maximum torque output of 44 Newton Meters, signifying high power for demanding tasks.
Selecting Gear Speed
The drill/driver has two mechanical gear speeds, selected via a switch on top of the tool. Gear 1 provides lower speed and higher torque, ideal for driving screws or drilling large holes. Gear 2 provides higher speed and lower torque, suitable for faster drilling of smaller holes.
Figura 8: Icon representing the two-speed gear system, allowing users to select between high torque/low speed and low torque/high speed modes.
Integrated LED Light and Battery Indicator
An integrated LED light illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces. The battery indicator lights on the battery pack show the remaining charge level.
Figura 9: Un detallat view of the integrated LED work light, positioned to illuminate the drilling area, and the battery charge indicator lights on the base of the tool.
Figura 10: An individual demonstrating the use of the Einhell cordless drill/driver for a drilling application on a wooden surface, highlighting its practical use.
Manteniment
Neteja
Regularly clean the ventilation slots and the tool housing with a soft brush or compressed air. Do not use water or chemical cleaning agents. Keep the chuck jaws free of dust and debris.
Emmagatzematge
Store the drill/driver and its accessories in a dry, dust-free place, out of reach of children. If storing for extended periods, ensure the battery is partially charged (around 50%) and recharge it every few months to maintain battery health.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'inicia | La bateria no està carregada o està mal inserida | Charge the battery. Ensure battery is fully inserted until it clicks. |
| Potència o velocitat reduïdes | La càrrega de la bateria és baixa | Recarregueu la bateria. |
| La broca rellisca al mandril | Chuck not tightened sufficiently or bit shank is dirty | Tighten chuck firmly. Clean bit shank before inserting. |
| Sobreescalfament durant l'ús | Continuous heavy load or blocked ventilation slots | Allow tool to cool down. Clear any obstructions from ventilation slots. Reduce load. |
Especificacions
- Model: TE-CD 18/2 Li +39
- Número de peça: 4514219
- Voltage: 18 Volts
- Tipus de bateria: Ió de liti
- Capacitat de la bateria: 2.5 Ah (included)
- Parell màxim: 44 Newton metres
- Number of Gears: 2
- Tipus de mandril: Sense clau
- Pes de l'article: Aproximadament 2.22 lliures (1.01 kg)
- Dimensions del producte: 7.48 x 3.54 x 8.27 polzades
- Components inclosos: Cordless Drill/Driver, 2.5 Ah Battery, Rapid Charger, 39-piece Accessory Set, Carrying Case
Garantia i Suport
Einhell products are manufactured to the highest quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and registration details.
For technical support, spare parts, or warranty claims, please contact Einhell customer service. Contact information can typically be found on the Einhell official weblloc web o a la documentació que s'inclou amb el producte.
