1. Introducció
Gràcies per la compraasing the CASIO TQ-720J-3JF Analog Alarm Clock. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
2. Producte acabatview
The CASIO TQ-720J-3JF is an analog alarm clock featuring radio reception for accurate timekeeping, a loud twin-bell alarm, snooze function, and an integrated light. Its classic design is complemented by modern functionality.
Figura 2.1: Frontal View of the Alarm Clock
This image displays the front of the Casio TQ-720J-3JF alarm clock. It features a green casing, an analog dial with clear black numbers from 1 to 12, and two prominent silver bells on top, characteristic of a traditional twin-bell alarm clock.
Característiques principals:
- Radio reception function (automatic/manual) for precise time synchronization.
- Radio wave reception ON/OFF function.
- Loud bell alarm with snooze capability.
- Integrated light with afterglow function for visibility in low light.
- Second hand stop function during alarm setting.
- Step second hand movement.
Figura 2.2: posterior View i Controls
This image shows the back of the alarm clock, highlighting the battery compartment, the time adjustment knob, the alarm setting knob, and the switch for enabling or disabling radio wave reception.
3. Configuració
3.1 Instal·lació de la bateria
- Obriu la tapa del compartiment de les piles que es troba a la part posterior del rellotge (vegeu la Figura 2.2).
- Insert two (2) AA alkaline batteries, ensuring correct polarity (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
3.2 Initial Time Setting and Radio Reception
This clock is equipped with a radio reception function to automatically synchronize the time. For optimal reception, place the clock near a window or in an area with good signal strength.
Figure 3.1: Radio Wave Reception Feature
This diagram visually represents the 'Wave Ceptor' technology, indicating the clock's ability to receive radio signals for accurate time synchronization. It also shows the ON/OFF control for this feature.
- Automatic Reception: After battery installation, the clock will attempt to receive radio signals and set the time automatically. This process may take several minutes.
- Recepció manual: If automatic reception fails or you wish to initiate it manually, press and hold the 'RECEIVE' button (if present, or refer to specific button on back, typically labeled with a signal icon) until the hands start moving.
- Radio Wave Reception ON/OFF: Use the dedicated switch on the back of the clock to enable or disable the radio reception function. Disabling it will prevent automatic time synchronization, and you will need to set the time manually.
- Manual Time Adjustment (if radio reception is off or unavailable): Rotate the time setting knob (refer to Figure 2.2) to adjust the hour and minute hands to the correct time.
4. Instruccions de funcionament
4.1 Configuració de l'alarma
- Locate the alarm setting knob on the back of the clock (refer to Figure 2.2).
- Rotate the alarm setting knob to move the small alarm hand to your desired alarm time.
- Ensure the alarm ON/OFF switch (usually a small lever on the side or back) is in the 'ON' position.
- The twin-bell alarm will sound at the set time.
4.2 Funció de repetició
When the alarm sounds, press the large button located on the top of the clock (often integrated with the light button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes, depending on the model).
4.3 Ús de la llum
Press the light button (usually the same as the snooze button on top) to illuminate the clock face. The light features an afterglow function, meaning it will remain lit for a short period after the button is released, allowing you to read the time in the dark.
4.4 Second Hand Stop Function
When setting the alarm, the second hand will automatically stop moving. This feature helps in precisely setting the alarm time without distraction and conserves battery power during the alarm setting process.
5. Manteniment
- Neteja: Netegeu el rellotge amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat.
- Substitució de la bateria: Replace batteries promptly when the clock's functions (e.g., alarm, light) become weak or stop working. Always replace both batteries at the same time with new AA alkaline batteries.
- Emmagatzematge: If storing the clock for an extended period, remove the batteries to prevent leakage and potential damage.
6. Solució De Problemes
- El rellotge no marca l'hora exacta:
- Check if the radio reception function is enabled.
- Ensure the clock is in an area with good radio signal reception.
- Canvieu les piles si estan baixes.
- If radio reception is consistently poor, manually set the time.
- L'alarma no sona:
- Verify that the alarm ON/OFF switch is in the 'ON' position.
- Comproveu el nivell de la bateria i substituïu-la si cal.
- Ensure the alarm hand is correctly set to the desired time.
- La llum no funciona:
- Substituïu les piles.
7. Especificacions
- Model: TQ-720J-3JF
- Dimensions (A x A x P): Aproximadament 14.9 cm x 11.3 cm x 7.7 cm (5.8 x 4.5 x 3.0 polzades)
- Pes: Approximately 385 grams (13.5 oz)
- Material: Resina, Metall
- Font d'alimentació: 2 x piles alcalines AA
- Tipus de visualització: Analògic
- Característiques especials: Radio reception, Bell alarm, Snooze, Light (with afterglow), Second hand stop function
Figura 7.1: Dimensions i pes del producte
This image provides a visual representation of the alarm clock's physical dimensions, indicating its height, width, and depth, along with its approximate weight.
8. Garantia i Suport
For warranty information, please refer to the warranty card included with your product or contact your local Casio distributor or retailer. For technical support or further assistance, please visit the official Casio weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
