Manual d'usuari de la càmera de xarxa exterior de 12 megapíxels Vivotek FE9391-EHV-v2

1. Introducció

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Vivotek FE9391-EHV-v2 12 Megapixel Outdoor Network Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

The Vivotek FE9391-EHV-v2 is an outdoor fisheye network camera designed for surveillance applications, featuring a 12-megapixel sensor, WDR Pro for high-contrast environments, H.265 compression, and Smart IR II technology for night vision up to 20 meters. Its housing is IP66-rated for weather protection and IK10-rated for vandal resistance.

2. Informació de seguretat

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• Ensure all power connections are secure and meet specified voltagrequisits electrònics (12 volts).
• No intenteu desmuntar ni modificar la càmera. Encarregueu tot el manteniment a personal qualificat.
• Install the camera in a location that can support its weight and is protected from extreme environmental conditions beyond its IP66 rating.
• Avoid pointing the lens directly at strong light sources for extended periods.
• Use only Vivotek-approved accessories.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Vivotek FE9391-EHV-v2 Network Camera (1 unit)
• Installation Guide (Printed or Digital)
• Cargols i ancoratges de muntatge
• Waterproof Connector (if applicable)

Note: Specific contents may vary. Refer to the packaging for exact details.

4. Configuració i instal·lació

This section outlines the steps for physically installing and initially connecting your Vivotek FE9391-EHV-v2 camera.

4.1 Consideracions de muntatge

The FE9391-EHV-v2 is designed for outdoor use and supports wall or desk mounting. Choose a mounting location that provides the desired field of view (180 degrees) and is within reach of network and power connections.

Figura 1: Vivotek FE9391-EHV-v2 Fisheye Network Camera. This image shows the white dome-shaped camera with a black central lens area, featuring the Vivotek logo on the top left. The fisheye lens is visible in the center.

4.2 Passos d'instal·lació física

1. Prepareu la superfície de muntatge: Mark the drilling points using the provided mounting template (if applicable). Drill holes for the mounting screws and anchors.
2. Fixeu la base de la càmera: Attach the camera's mounting base securely to the prepared surface using the screws.
3. Connect Network and Power:
   • Xarxa: Connect an Ethernet cable to the camera's RJ45 port. This camera supports Power over Ethernet (PoE), simplifying wiring.
   • Potència (opcional): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input. Ensure the power source meets the camera's 22.5 watts requirement.
4. Fixeu el cos de la càmera: Secure the main camera body to the mounting base. Ensure it is properly aligned and locked into place according to the specific model's mechanism.
5. Ajusta l'angle de la lent: If adjustable, position the fisheye lens to cover the desired surveillance area.

4.3 Configuració inicial de la xarxa

After physical installation, connect the camera to your network. The camera typically obtains an IP address via DHCP. Use Vivotek's IP Search utility or a network scanner to discover the camera's IP address. Access the camera's web interfície mitjançant a web browser using its IP address to complete initial setup, including setting a strong password and configuring network settings.

5. Instruccions de funcionament

This section covers the basic operation of your Vivotek FE9391-EHV-v2 camera through its web interfície.

5.1 Accés a Web Interfície

1. Obre a web navegador (per exemple, Chrome, Firefox).
2. Introduïu l'adreça IP de la càmera a la barra d'adreces i premeu Intro.
3. Log in using your username and password. (Default credentials are often provided in the quick start guide; change them immediately after first login).

5.2 Viu View and Dewarping

The camera's web interface provides a live view of the surveillance area. Due to the fisheye lens, the raw image will appear distorted. The camera features local dewarping capabilities. Navigate to the "Live View" or "Display" section to select various dewarping modes (e.g., 1O, 1P, 1R, 4R) to view the scene in a more conventional perspective.

5.3 Enregistrament i emmagatzematge

Configure recording settings through the web interface. Options typically include:

• Gravació contínua: Grava constantment.
• Enregistrament activat per esdeveniments: Records when motion is detected or other events occur.
• Enregistrament programat: Records during specific times.

Recordings can be stored on a Network Video Recorder (NVR), a local SD card (if supported and installed), or network-attached storage (NAS).

5.4 Detecció de moviment i alertes

The camera supports motion detection. Configure detection zones and sensitivity levels in the "Event" or "Alarm" settings. Set up alerts such as email notifications or FTP uploads when motion is detected.

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil de la càmera.

• Neteja de la lent: Gently wipe the lens with a soft, clean, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces. Do not use abrasive cleaners.
• Actualitzacions de firmware: Reviseu periòdicament el Vivotek website for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the provided instructions carefully during the update process.
• Inspecció física: Regularly inspect the camera housing, mounting brackets, and cables for any signs of damage, corrosion, or loose connections.
• Connectivitat de xarxa: Ensure stable network connectivity. Check cable integrity and network device status.

7. Solució De Problemes

Aquesta secció ofereix solucions a problemes comuns que podeu trobar.

If the problem persists, contact Vivotek technical support.

8. Especificacions

Key technical specifications for the Vivotek FE9391-EHV-v2 Network Camera:

• Model: FE9391-EHV-v2
• Sensor d'imatge: CMOS de 12 megapíxels
• Resolució: 2944 x 2944
• Lent: 1.22 mm Fixed Fisheye Lens
• Camp de View: 180 graus
• Compressió de vídeo: H.265, H.264, MJPEG
• Visió nocturna: Infrared (IR) up to 20m (65.62 ft) with Smart IR II
• Classificació ambiental: IP66 (resistent a la pols i a l'aigua)
• Resistència antivandàlica: IK10
• Entrada d'alimentació: 12 Volts DC or Power over Ethernet (PoE)
• Consum d'energia: 22.5 watts
• Connectivitat: Wired Ethernet (PoE), Wi-Fi (for certain configurations, though primary is PoE)
• Dimensions: Aproximadament 19.69 x 19.69 x 11.02 polzades
• Pes: 1.2 quilograms (2.64 lliures)
• Característiques especials: WDR Pro, Smart Stream III, Smart VCA, Vision Object Analytics, Motion Sensor, Local Dewarp

9. Informació de la garantia

Vivotek products typically come with a limited warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Vivotek weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

10. Suport tècnic

For technical assistance, product inquiries, or service requests, please contact Vivotek technical support through their official channels:

• Weblloc: Visit the Vivotek official weblloc web amb recursos de suport, preguntes freqüents i informació de contacte.
• Portal d'assistència en línia: Access the Vivotek support portal for submitting tickets and finding documentation.
• Suport telefònic: Refer to the Vivotek weblloc web per a números de telèfon d'assistència regional.

When contacting support, please have your camera's model number (FE9391-EHV-v2) and serial number ready.