Manual d'usuari del commutador Ethernet industrial Cisco Catalyst IE-3300-8T2S-A

1. Introducció

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Cisco Catalyst IE-3300-8T2S-A Industrial Ethernet Switch. Please read this manual thoroughly before using the device and retain it for future reference.

2. Informació de seguretat

Observeu les següents precaucions de seguretat per evitar lesions i danys al dispositiu:

• Seguretat elèctrica: Ensure power connections are made by qualified personnel. Disconnect power before servicing.
• Condicions ambientals: Feu funcionar l'interruptor dins dels rangs de temperatura i humitat especificats. Eviteu l'exposició a la humitat o a temperatures extremes.
• Muntatge: Munteu el dispositiu de manera segura per evitar caigudes accidentals.
• Dissipació de calor: Do not obstruct ventilation openings. The device can generate heat during operation.

3. Producte acabatview

The Cisco Catalyst IE-3300-8T2S-A is a robust Industrial Ethernet Switch designed for demanding industrial environments. It features multiple Ethernet ports and SFP slots for flexible network connectivity.

3.1. Components del panell frontal

Figura 1: Front panel of the Cisco Catalyst IE-3300-8T2S-A Industrial Ethernet Switch. Visible components include eight RJ45 Ethernet ports, two SFP 1G ports, two DC power input terminals (DC-A and DC-B) supporting 12-48V at 4.0A, and a console port. The device features a robust metal casing with heat dissipation fins on the side.

• RJ45 Ethernet Ports: Eight (8) 10/100/1000BASE-T ports for standard Ethernet connections.
• SFP 1G Ports: Two (2) Small Form-Factor Pluggable (SFP) slots for fiber optic or copper SFP transceivers, supporting 1 Gigabit Ethernet.
• DC Power Inputs (DC-A, DC-B): Redundant power input terminals for 12-48V DC, 4.0A.
• Port de la consola: For local management and configuration.
• Indicadors LED: Various LEDs to indicate power status, port link/activity, and system status.

4. Configuració

4.1. Muntatge de l'interruptor

The Cisco Catalyst IE-3300-8T2S-A is designed for industrial environments and can be mounted on a DIN rail or panel. Ensure the mounting location provides adequate ventilation and is free from excessive vibration or moisture.

1. Attach the appropriate mounting kit (not included) to the switch.
2. Securely fasten the switch to the desired surface or DIN rail.

4.2. Potència de connexió

The switch supports redundant DC power inputs. It is recommended to use both DC-A and DC-B for power redundancy.

1. Ensure the power source is within the specified range of 12-48V DC.
2. Connect the positive (+) and negative (-) wires from your DC power supply to the corresponding terminals on DC-A.
3. For redundancy, connect a second DC power supply to the DC-B terminals.
4. Verify all power connections are secure before applying power.

4.3. Connexions de xarxa

1. Ports RJ45: Connect standard Ethernet cables from your network devices (e.g., computers, printers, other switches) to the RJ45 ports.
2. Ports SFP: Insert compatible SFP transceivers into the SFP 1G slots. Then, connect appropriate fiber optic or copper cables to the transceivers.

5. Funcionament de l'interruptor

5.1. Encès

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm the device is receiving power.

5.2. Indicadors LED

Els LED del panell frontal proporcionen informació visual sobre l'estat del commutador i els seus ports:

• LED d'alimentació: Indica l'estat d'alimentació del dispositiu.
• LED del sistema: Indica l'estat operatiu general del commutador.
• LED del port: Typically indicate link status (solid green for active link) and activity (blinking for data transmission) for each Ethernet and SFP port. Refer to the specific product documentation for detailed LED behavior.

5.3. Configuració Inicial

For initial configuration and advanced settings, connect a console cable to the console port and use a terminal emulation program (e.g., PuTTY, Tera Term) to access the command-line interface (CLI). Refer to the Cisco IOS documentation for detailed configuration instructions.

6. Manteniment

6.1. Neteja

Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris to maintain proper airflow.

6.2. Actualitzacions de firmware

Consulteu regularment el suport tècnic de Cisco website for available firmware updates. Keeping the firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.

7. Solució De Problemes

If you encounter issues with your Cisco Catalyst IE-3300-8T2S-A switch, consider the following:

• Sense energia: Verify power cable connections to both DC-A and DC-B. Check the power source and ensure it provides the correct voltage (12-48V DC).
• Sense enllaç al port: Check the Ethernet or fiber cable connection. Ensure the connected device is powered on and functioning correctly. Verify the SFP transceiver is properly seated and compatible.
• System LED Error: Consult the Cisco documentation for specific system LED error codes or patterns.
• Problemes de connectivitat de xarxa: Check IP configurations, VLAN settings, and other network parameters. Use the console port to access the CLI for diagnostics.
• Sobreescalfament: Ensure the switch is in an environment with adequate airflow and that ventilation fins are not blocked.

For persistent issues, refer to the comprehensive troubleshooting guides available on the Cisco support website or contact Cisco technical support.

8. Especificacions

9. Garantia i Suport

This Cisco Catalyst IE-3300-8T2S-A Industrial Ethernet Switch is a renewed product. For specific warranty details and support options, please refer to the terms provided by the seller or Amazon Renewed program at the time of purchase. General product support and documentation can be found on the official Cisco weblloc.

Per obtenir assistència tècnica, visiteu el Suport de Cisco Weblloc.