Introducció
The Victoper V8000 is a versatile and durable rechargeable headlamp designed for various outdoor activities. It features eight LED lights, multiple lighting modes, and a waterproof design to provide reliable illumination in diverse environments. This manual provides essential information for the proper setup, operation, and maintenance of your headlamp.
Image: The Victoper V8000 headlamp with its adjustable strap and multiple LED lights.
Configuració
1. Initial Battery Preparation
Important: Before first use, open the battery compartment and remove the protective plastic film from the rechargeable batteries. Failure to do so will prevent the headlamp from charging or operating correctly.
2. Carregant el capamp
El capçal Victorer V8000amp supports USB charging. Connect the provided USB cable to the charging port on the headlamp and to a standard USB power source (e.g., wall adapter, computer, power bank). The charging indicator light will illuminate during charging. A full charge typically provides 3-6 hours of operation depending on the mode used.
Imatge: Primer pla view del capamp showing the charging port, switch button, and adjustable loop.
3. Ajust de la diadema
The elastic headband is adjustable to ensure a comfortable and secure fit. Use the adjustable loops on the sides of the strap to tighten or loosen the headband as needed. The headlamp should fit snugly without being too tight.
Instruccions de funcionament
1. Engegada/Apagada i Selecció de Mode
El capamp features a main switch button for controlling power and cycling through its 8 lighting modes. Press the button to turn the headlamp on and cycle through the available modes. Hold the button down to turn the headlamp apagat.
2. Modes d'il·luminació
The Victoper V8000 offers 8 distinct lighting modes to suit various needs:
- 2*T6 White: Two main white LEDs illuminated.
- 4*XPE White: Four auxiliary white LEDs illuminated.
- 2*T6 + 4*XPE White: All six white LEDs illuminated for maximum brightness.
- 2*T6 + 4*XPE White (Strobe): All six white LEDs flashing.
- 2*COB Red: Two COB red LEDs illuminated.
- 2*COB Red (Strobe): Two COB red LEDs flashing (SOS mode).
- 2*COB White (Strong): Two COB white LEDs illuminated at strong intensity.
- 2*COB White (Standard): Two COB white LEDs illuminated at standard intensity.
Image: Visual representation of the 8 different lighting modes available on the headlamp.
3. Adjustable Head Angle
El capamp unit can be tilted up to 90 degrees to direct the light precisely where needed. This feature allows for optimal illumination of your path or workspace without adjusting your head position.
Image: Diagram illustrating the 90-degree adjustable head angle feature of the headlamp.
4. Llum d'advertència posterior
The battery compartment located at the rear of the headband includes a warning light. This light enhances visibility from behind, which is particularly useful during activities like running or cycling in low-light conditions.
Imatge: Una persona que porta el capamp in a snowy environment, demonstrating the rear warning light.
Manteniment
1. Neteja
Per netejar el capçalamp, gently wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components. Ensure the charging port cover is securely closed before cleaning.
2. Emmagatzematge
Guardeu el capamp in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the batteries are partially charged (around 50%) and recharge them every few months to maintain battery health.
3. Resistència a l'aigua
El capçal Victorer V8000amp has an IPX5 waterproof rating, meaning it is protected against splashes of water from any direction. It is suitable for use in rain or wet conditions but should not be submerged in water.
Image: Close-up of the headlamp with water droplets, illustrating its IPX5 waterproof capability.
Resolució de problemes
- Capamp does not turn on or charge:
- Ensure the protective plastic film has been removed from the batteries inside the battery compartment.
- Verify that the USB charging cable is securely connected to both the headlamp i la font d'energia.
- Check if the power source is functional.
- Autonomia curta de la bateria:
- Assegureu-vos del capçalamp està completament carregat abans del seu ús.
- Operating in higher brightness modes will consume battery power more quickly. Consider using lower brightness modes when possible.
- Battery performance can decrease in extremely cold temperatures.
- La sortida de llum és tènue:
- The battery may be low. Recharge the headlamp.
- Ensure the lens is clean and free from dirt or obstructions.
Especificacions
| Número de model | V8000 |
| Marca | Víctor |
| Tipus de font de llum | LED |
| Brillantor | Fins a 100 lúmens (llum blanca) |
| Nombre de modes | 8 |
| Font d'alimentació | Funciona amb bateria (1 bateria de polímer de liti inclosa) |
| Tipus de bateria | Ió de liti |
| Carregant | Càrrega USB |
| Resistència a l'aigua | IPX5 (impermeable) |
| Material | ABS |
| Pes de l'article | 0.33 lliures (5.3 unces) |
| Dimensions del producte | 3 "P x 3" W x 3" H |
Informació de la garantia
The Victoper V8000 Rechargeable 8-LED Headlamp ve amb a Garantia de per vida. For any warranty claims or issues, please retain your proof of purchase and contact customer support.
Atenció al client
If you have any questions, require assistance, or encounter any issues with your Victoper V8000 headlamp, please contact Victoper customer support. Our team is available to provide solutions and support as quickly as possible.
For contact information, please refer to the packaging or visit the official Victoper weblloc.
