1. Introducció
Thank you for choosing the PERLESMITH UL-Listed Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read this manual thoroughly before installation and keep it for future reference. This mount is designed to securely hold most 26-60 inch flat or curved LED, LCD, OLED, and 4K TVs up to 77 lbs, offering full motion capabilities for an optimal viewexperiència.
Acabatview of the PERLESMITH Full Motion TV Wall Mounts and included hardware.
2. Informació de seguretat
ADVERTIMENT: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- Do not install this product on walls that exceed the recommended weight capacity.
- Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
- Feu servir sempre un localitzador de muntants de fusta per localitzar-los amb precisió. No els instal·leu sols en plaques de guix.
- For concrete or brick walls, use appropriate anchors and ensure the wall is solid.
- Do not overtighten screws. Overtightening can cause damage to the mount or your TV.
- Aquest producte només està pensat per a ús interior.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
The mount features a UL-Listed design for enhanced safety and reliability, with a 34% thicker arm for robust support.
3. Contingut del paquet
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact PERLESMITH customer service.
- Muntatge de la placa de paret
- Suports per a TV (x2)
- Mounting Hardware Kit (various screws, washers, spacers, anchors for wood stud/concrete/brick)
- Nivell de bombolla
- Manual d'instruccions
All components included in the PERLESMITH TV wall mount package.
4. Configuració i instal·lació
4.1 Llista de comprovació prèvia a la instal·lació
- Compatibilitat amb TV: Ensure your TV size is between 26-60 inches and weighs up to 77 lbs.
- Patró VESA: Check the VESA mounting holes on the back of your TV. This mount supports VESA patterns including 400x400mm, 400x200mm, 300x300mm, 300x200mm, 200x200mm, 200x100mm, 100x200mm, and 100x100mm.
- Tipus de paret: Identify your wall type: single wood stud, brick wall, or concrete wall.
- Eines necessàries: Pencil, drill, Phillips head screwdriver, socket wrench, stud finder (for wood studs), hammer (for concrete anchors).
The mount offers wide compatibility with various wall types and VESA patterns up to 400x400mm.
4.2 Instal·lació pas a pas
- Fixeu els suports de TV: Carefully place your TV face down on a soft, clean surface. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
- Mark Wall Plate Position: Determine the desired height for your TV. Use the wall plate as a template to mark the drilling holes on your wall. For wood stud installation, ensure the wall plate is centered on a single stud. For concrete/brick, mark holes directly.
- Perforar forats pilot: Drill pilot holes at the marked locations. For wood studs, use a 7/32" (5.5mm) drill bit. For concrete/brick, use a 3/8" (10mm) drill bit and insert concrete anchors flush with the wall surface.
- Placa de paret de muntatge: Attach the wall plate to the wall using the lag bolts and washers. Tighten the bolts firmly but do not overtighten. Use the included bubble level to ensure the wall plate is perfectly horizontal.
- Penjar la televisió: With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount.
- Fixar el televisor al muntatge: Tighten the security screws located on the bottom of the TV brackets to lock the TV in place, preventing accidental dislodgement.
The design allows for single stud mounting, simplifying the installation process.
5. Instruccions de funcionament
Your PERLESMITH Full Motion TV Wall Mount offers versatile adjustments to achieve the perfect viewing angle from anywhere in the room.
- Ajust d'inclinació: The mount allows a tilt range of +5° to -15°. Loosen the tilt knobs on the TV brackets, adjust the TV to your desired angle, and then tighten the knobs to secure it. This helps reduce glare from lights or windows.
- Ajust de gir: The articulating arm allows for a swivel of up to +/-90° (maximum swivel angle depends on TV size). Gently push or pull the TV to the left or right to achieve your preferred viewdirecció.
- Extensió: The mount can extend up to 18.89 inches (PSMFK12) or 18.3 inches (PSMFK1) from the wall, allowing you to pull the TV out for better viewing or access to cables.
- Ajust de nivell: After installation, you can fine-tune the TV's level by +/-3° to ensure it is perfectly horizontal.
Experience full motion flexibility with extension, swivel, and tilt capabilities.
Achieve a great view from anywhere with the mount's swivel functionality.
Fine-tune your TV's level after installation for a perfect horizontal alignment.
6. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Periodically check all screws and connections to ensure they are secure. Retighten if necessary, but do not overtighten.
- Netegeu el suport amb un drap suau i sec. Eviteu utilitzar netejadors o dissolvents abrasius.
- If the mount becomes stiff or difficult to move, apply a small amount of silicone-based lubricant to the articulating joints.
7. Solució De Problemes
- El televisor no està anivellat: Use the +/-3° level adjustment feature. If the wall plate itself is not level, you may need to slightly loosen the lag bolts, adjust, and retighten.
- Difficulty moving the mount: Ensure all adjustment knobs are loosened before attempting to move the TV. If still stiff, apply lubricant as per maintenance instructions.
- La muntura sembla inestable: Immediately remove the TV from the mount. Recheck all connections and ensure the wall plate is securely fastened to a suitable wall structure. Verify that the TV's weight and VESA pattern are within the mount's specifications.
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | PERLESMITH |
| Números de model | PSMFK1, PSMFK12 |
| Compatibilitat de la mida del televisor | 26-60 polzades |
| Capacitat de pes | Fins a 77 lliures (35 kg) |
| Compatibilitat VESA (màx.) | 400x400mm |
| VESA Compatibility (Min) | 100x100mm |
| Tipus de moviment | Articulat, giratori, inclinable |
| Angle d'inclinació | +5° a -15° |
| Angle de gir | +/-90° (max. depends on TV size) |
| Extensió des de la paret | 1.77" to 18.89" (PSMFK12), up to 18.3" (PSMFK1) |
| Ajust de nivell | +/-3° |
| Material | Acer d'aliatge |
| Color | Negre |
Key specifications for the PERLESMITH TV Wall Mount.
9. Garantia i Suport
PERLESMITH products are designed for durability and reliability. For warranty information, technical support, or any questions regarding your product, please visit the official PERLESMITH website or contact their customer service directly. Please have your model number (PSMFK1 or PSMFK12) and purchase details ready when contacting support.
