Empava 71-Inch Freestanding Whirlpool Bathtub User Manual

1. Introducció

This manual provides essential information for the safe installation, operation, and maintenance of your Empava 71-Inch Freestanding Whirlpool Bathtub. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Figura 1.1: Frontal view of the Empava 71-Inch Freestanding Whirlpool Bathtub.

2. Informació de seguretat

ADVERTÈNCIA: Per reduir el risc de lesions, no permeteu que els nens facin servir aquest producte tret que estiguin estretament supervisats en tot moment.

WARNING: To reduce the risk of injury, do not remove the suction cover. The suction cover is designed to prevent hair and body entrapment.

• Always ensure the bathtub is properly grounded according to local electrical codes.
• Do not operate the hydromassage system without sufficient water in the tub.
• Avoid using abrasive cleaners or harsh chemicals that may damage the acrylic surface.
• Ensure all plumbing connections are secure and leak-free before filling the tub.
• Consult a qualified professional for installation if you are unsure about any steps.

3. Components i peces

Your Empava Whirlpool Bathtub includes the following main components:

• Acrylic Bathtub Shell
• 0.75HP Water Pump (UL Certified)
• 7 Adjustable Water Jets (2 lumbar, 4 body, 1 foot)
• Center Drain Assembly
• Faucet with Handheld Showerhead
• Control Knobs for Water Flow and Temperature
• Two Black Headrests
• Peus d'anivellament ajustables

Figura 3.1: Mésview of bathtub components including jets and faucet assembly.

4. Instal·lació

4.1 Comprovacions prèvies a la instal·lació

• Verify that the installation area can support the weight of the filled bathtub and occupant.
• Ensure adequate space for plumbing connections and maintenance access.
• Confirm that all necessary plumbing and electrical rough-ins are in place according to local codes.

4.2 Dimensions i espai lliure

Refer to the diagram below for precise dimensions and required clearances for installation.

Figure 4.1: Detailed dimensions of the Empava 71-Inch Freestanding Whirlpool Bathtub.

Outer Dimensions: 70.87 in. L x 33.86 in. W x 22.05 in. H. Effective bathtub capacity: 65 Gallons.

4.3 Plumbing and Electrical Connections

• Connect the hot and cold water supply lines to the faucet inlets. Ensure proper sealing to prevent leaks.
• Connect the drain assembly to your floor drain. Test for leaks after connection.
• The 0.75HP water pump requires a dedicated electrical circuit. Consult a licensed electrician for proper wiring and grounding in accordance with local electrical codes.
• The tub accessories, including the faucet, knobs, showerhead, and jets, are pre-drilled and pre-installed for a convenient installation process.

Figure 4.2: Pre-installed faucet and control knobs.

5. Instruccions de funcionament

5.1 Omplir la banyera

• Assegureu-vos que el tap del desguàs estigui tancat.
• Turn on the hot and cold water supply using the control knobs to achieve the desired water temperature.
• Fill the bathtub to a level that covers the jets before activating the hydromassage system.

5.2 Activating Hydromassage Jets

• Once the tub is filled above the jets, press the power button located on the tub deck to activate the 0.75HP water pump.
• The 7 adjustable water jets will begin to provide a hydromassage experience.
• The jets are strategically placed in the lumbar, body, and foot regions to provide comprehensive relaxation.

Figure 5.1: Detail of an active hydromassage jet.

5.3 Using the Handheld Showerhead

• To divert water to the handheld showerhead, pull up the diverter knob on the faucet assembly.
• Ensure the main faucet spout is closed or water flow is reduced before diverting to the showerhead.

5.4 Draining the Bathtub

• To drain the tub, press the center drain stopper to open it.
• Ensure all water is drained after each use.

6. Manteniment

6.1 Neteja de la banyera

• Clean the acrylic surface with a soft cloth and mild, non-abrasive cleaner after each use.
• For stubborn stains, use a cleaner specifically designed for acrylic surfaces.
• Esbandiu bé amb aigua neta i eixugueu-ho per evitar taques d'aigua.

6.2 Jet and Plumbing System Cleaning

• Periodically fill the tub with warm water and add a small amount of mild detergent or a specialized jet cleaning solution.
• Run the hydromassage system for 10-15 minutes to circulate the cleaning solution.
• Drain the tub, refill with clean water, and run the jets again for a few minutes to rinse the system.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

9.1 Garantia del producte

The Empava Whirlpool bathtub includes a Garantia limitada de peces d'2 any. This warranty covers the tub feet, drain, overflow, knobs, jets, headrest, and any leaks on the body of the bathtub. Please retain your proof of purchase for warranty claims.

9.2 Atenció al client

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Empava customer support. You can find contact information on the official Empava weblloc web o a través del vostre distribuïdor.

Visita el Empava Store on Amazon per a més informació.