1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON IR_WAL_F Outdoor Motion Detector. This device is designed for flush wall mounting and is suitable for both outdoor and bathroom environments due to its IP65 rating. It features an infrared sensor to detect motion and automatically control connected lighting, offering adjustable detection range, light duration, and ambient light sensitivity.
Imatge 1.1: Frontal view of the SEBSON IR_WAL_F Outdoor Motion Detector.
2. Instruccions de seguretat
Llegiu atentament aquestes instruccions de seguretat abans de la instal·lació i el funcionament. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o altres perills.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normatives locals de cablejat.
- Always disconnect the power supply at the main circuit breaker before performing any installation, maintenance, or repair work.
- Assegureu-vos de posar a terra correctament el dispositiu.
- Do not exceed the maximum load ratings: 1200W for incandescent bulbs and 600W for LED or other energy-saving bulbs.
- The device is IP65 rated, providing protection against dust and water jets. It is suitable for outdoor use and in wet areas, but must not be submerged in water.
- No obriu ni modifiqueu el dispositiu. No hi ha peces a l'interior que l'usuari pugui reparar.
3. Producte acabatview
The SEBSON IR_WAL_F is an infrared motion detector designed for seamless integration into your wall. Its key features include:
- Sensor de moviment per infrarojos: Detects movement based on heat radiation.
- Flush Wall Mount Design: For discreet and integrated installation.
- Wide Detection Area: Up to 10 meters range with a 190-degree angle.
- Adjustable Light Duration: Configurable from 10 seconds to 30 minutes, or permanent ON/OFF.
- Adjustable Ambient Light Sensitivity: Operates between 3 LUX (dark) and 2,000 LUX (daylight).
- Compatibilitat LED: Suitable for use with LED and incandescent light sources.
- Classificació IP65: Provides protection against dust ingress and low-pressure water jets from any direction.
Imatge 3.1: acabatview of key features including detection range, LED compatibility, IP rating, light duration, LUX sensitivity, and voltage.
Imatge 3.2: Desplegada view showing the main components of the motion detector.
4. Especificacions
| Característica | Especificació |
|---|---|
| Fabricant | SEBSON |
| Número de model | IR_WAL_F |
| Dimensions del producte | 8.6 x 8.6 x 6.3 cm |
| Dimensions d'instal·lació | 53 x 53 x 23 mm |
| Pes | 125 g |
| Color | Blanc |
| Material | Plàstic |
| Font d'alimentació | AC |
| Voltage | 230 Volts |
| Max Power (Incandescent) | 1200 watts |
| Max Power (LED/Energy-saving) | 600 watts |
| Mètode d'instal·lació | Wall Mount (Flush) |
| Compatibilitat del tipus de bombeta | LED |
| Zona de detecció | Max. 10m / 190° |
| Tipus de canvi | Interruptor de diapositives |
| Característiques especials | LED compatible, IP65, Programmable, 190° detection, ON/OFF switch |
| Temperatura de funcionament | 40 °C |
5. Instal·lació
Follow these steps for proper installation of the motion detector. It is recommended that installation be carried out by a qualified electrician.
5.1. Preparació
- Assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
- Prepare a standard flush-mount wall box (53x53x23mm minimum internal dimensions) at the desired installation height (recommended 1m - 1.8m for optimal detection).
5.2. Muntatge i cablejat
- Carefully remove the front cover of the motion detector to access the wiring terminals and mounting plate.
- Connect the electrical wires to the terminals as shown in the wiring diagram below. Ensure correct connections for Live (L), Neutral (N), and Switched Live (L') to the light fixture.
- Secure the main sensor unit into the flush-mount wall box using appropriate screws.
- Reattach the front cover to the sensor unit.
Image 5.1: Wiring diagram for the SEBSON IR_WAL_F motion detector.
Image 5.2: Product dimensions and flush mounting illustration.
5.3. Detection Area
The sensor has a detection range of up to 10 meters and a 190-degree angle. The optimal installation height is between 1m and 1.8m. Consider the placement to avoid false triggers from moving objects or heat sources.
Image 5.3: Diagram illustrating the detection range and angle of the motion detector.
6. Funcionament
Once installed and powered on, the motion detector will automatically control the connected lighting based on its settings. The sensor activates the light when motion is detected within its range and the ambient light level is below the set LUX threshold. The light will then remain on for the duration set by the TIME control.
7. Ajust de configuració
The motion detector features two adjustable controls: TIME and LUX. These controls are typically located behind the front cover of the sensor unit.
Imatge 7.1: View of the adjustment dials for TIME and LUX settings.
- TIME (Light Duration): This dial adjusts how long the connected light remains on after motion is detected and no further motion is sensed. The settings typically range from 10 seconds to 30 minutes. There may also be an option for permanent ON or OFF. Turn the dial clockwise to increase the duration and counter-clockwise to decrease it.
- LUX (Sensibilitat a la llum ambiental): This dial sets the ambient light threshold. The sensor will only activate the light if the surrounding natural light level is below this set value. The range is typically from 3 LUX (very dark, only activates at night) to 2,000 LUX (daylight, activates regardless of natural light). Turn the dial towards the sun symbol for higher sensitivity (activates in brighter conditions) and towards the moon symbol for lower sensitivity (activates only in darker conditions).
8. Manteniment
To ensure optimal performance and longevity of your motion detector, follow these simple maintenance guidelines:
- Neteja: Periodically clean the surface of the sensor, especially the lens, with a soft, dry, lint-free cloth.
- Eviteu productes químics: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing or the sensor lens.
- Comprovació d'obstruccions: Ensure that the sensor lens is clear of any obstructions such as dirt, spiderwebs, or vegetation that could interfere with its detection capabilities.
- Power Off for Deep Cleaning: If a more thorough cleaning is required, always disconnect the power supply before proceeding.
9. Solució De Problemes
If you encounter issues with your SEBSON motion detector, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Light does not turn on when motion is detected. | Sense font d'alimentació Bombeta defectuosa Cablejat incorrecte LUX setting too high TIME setting too short | Comproveu la connexió d'alimentació i l'interruptor. Substitueix la bombeta. Verify wiring against diagram (Section 5.2). Adjust LUX setting to a lower value (towards moon symbol). Increase TIME setting. |
| La llum es manté encesa contínuament. | TIME setting on permanent ON Continuous motion in detection area Sensor defectuós | Adjust TIME setting to a timed duration. Remove obstructions or reposition sensor. Poseu-vos en contacte amb el servei d'assistència si el problema persisteix. |
| Light turns on randomly without apparent motion. | Environmental factors (e.g., moving branches, small animals, heat sources) Alta sensibilitat | Reposition sensor to avoid interference. Adjust sensitivity (if available) or reposition. |
| Detection range is too short or too long. | Incorrect installation height Obstruccions Configuració de la sensibilitat | Adjust installation height (refer to Section 5.3). Clear obstructions from detection path. Check if there are sensitivity adjustments (not explicitly mentioned for this model, but common). |
10. Garantia i Suport
SEBSON products are manufactured with quality and reliability in mind. For information regarding warranty coverage, please refer to the documentation provided with your purchase or visit the official SEBSON website. If you require technical assistance or have questions not covered in this manual, please contact SEBSON customer support.
