Introducció
The McGrey P212 MP is a versatile passive full-range speaker designed for both stationary and mobile stage setups, suitable for indoor and outdoor environments. This manual provides essential information for the safe and efficient operation of your speaker.
Les característiques clau inclouen:
- Passive full-range speaker with 120 W RMS / 600 W Peak power handling.
- Impedància de 8 ohms.
- 2-way system featuring a 12-inch woofer and a 1-inch tweeter.
- Frequency range of 55 Hz - 18 kHz.
- Maximum sound pressure level (SPL) of 96 dB.
- Equipped with SPK-compatible input and output connectors.
- Durable black plastic housing with 3 carrying handles and a front metal grille.
- Integrated 35 mm stand flange with fixing screw for easy mounting.
Informació de seguretat
Please read and understand all safety instructions before operating the speaker. Keep this manual for future reference.
- Potència: Ensure the speaker is connected to an appropriate amplifier with matching impedance (8 Ohm). Do not exceed the maximum power handling (600 W Peak).
- Col·locació: Place the speaker on a stable, level surface or mount it securely on a compatible speaker stand using the 35 mm flange. Avoid placing it in direct sunlight, near heat sources, or in excessively humid environments.
- Ventilació: Do not block ventilation openings. Ensure adequate airflow around the speaker.
- Connexions: Assegureu-vos sempre que amplifier is turned off before connecting or disconnecting cables to prevent damage to the speaker or amplifier. Use high-quality speaker cables.
- Protecció auditiva: High sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the speaker at high volumes.
- Neteja: Desconnecteu l'altaveu del amplifier before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or solvents.
- Servei: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
Contingut del paquet
Upon unpacking, please verify that all listed items are present and in good condition:
- 1 x McGrey P212 MP Passive Speaker
- Integrated 35 mm stand flange with fixing screw
- 3 x Integrated carrying handles
- Aquest manual d'usuari
Configuració
1. Col·locació d'altaveus
The McGrey P212 MP speaker can be used in various orientations:
- Pis de peu: Col·loqueu l'altaveu directament sobre una superfície estable i plana.
- Speaker Stand Mounting: Utilize the integrated 35 mm stand flange on the bottom of the speaker to mount it on a compatible speaker stand. Ensure the stand is stable and capable of supporting the speaker's weight (approximately 10.1 kg). Secure the speaker to the stand using the fixing screw.
- Monitor Position: The speaker's cabinet design allows it to be placed on its side for use as a floor monitor.
Figura 1: Angle view of the McGrey P212 MP Passive Speaker, showcasing its robust design and integrated handles.
Figure 2: The speaker positioned horizontally, demonstrating its capability for use as a floor monitor.
Figura 3: A baix view of the speaker, highlighting the 35 mm stand flange for pole mounting.
2. Connexions
The P212 MP features SPK-compatible connectors for input and linking to other speakers.
Figura 4: Detallada view of the rear connection panel, showing the SPK-compatible INPUT and LINK OUTPUT ports.
- Assegureu-vos el vostre ampel lifier està apagat abans de fer qualsevol connexió.
- Connect a speaker cable from the output of your ampmés viu al ENTRADA connector on the rear panel of the P212 MP speaker. Ensure a secure connection.
- If you are connecting multiple passive speakers in a daisy-chain configuration, use the SORTIDA ENLLAÇ connector to send the audio signal to the input of the next speaker. Ensure the total impedance load on your amplifier is within its safe operating range.
- Once all connections are secure, you may power on your ampmés viu.
En funcionament
The McGrey P212 MP is a passive speaker, meaning it requires an external amplifier to produce sound. Its operation is straightforward once properly connected.
- Encès: After ensuring all connections are correct and secure, power on your audio source (e.g., mixer, media player) and then your ampmés viu.
- Control de volum: Comença amb el amplifier's volume control at its minimum setting. Gradually increase the volume to a comfortable listening level. Avoid setting the volume too high, which can lead to distortion and potential damage to the speaker or your hearing.
- Reproducció d'àudio: Begin playing audio through your connected source. Adjust the volume and equalization on your amplifier or mixer as needed to achieve the desired sound.
- Apagar: When finished, first turn down the amplifier's volume, then power off the amplifier, and finally power off your audio source. This sequence helps prevent sudden pops or surges that could damage equipment.
Figure 5: The McGrey P212 MP speakers are suitable for various applications, including home entertainment and small events.
Manteniment
Proper maintenance will ensure the longevity and optimal performance of your McGrey P212 MP speaker.
- Neteja: Regularly wipe the speaker cabinet with a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker grille or connectors. Do not use abrasive cleaners, waxes, or solvents.
- Emmagatzematge: If storing the speaker for an extended period, keep it in a cool, dry place, away from direct sunlight and extreme temperatures. Consider using a protective cover to prevent dust accumulation.
- Inspecció: Periodically check all cables and connectors for signs of wear or damage. Ensure all screws and fasteners are tight.
Resolució de problemes
If you encounter issues with your McGrey P212 MP speaker, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so |
|
|
| So distorsionat |
|
|
| So intermitent |
|
|
If the problem persists after trying these solutions, please contact McGrey customer support or a qualified service technician.
Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | McGrey P212 MP |
| Tipus | Passive Full-Range Speaker |
| Gestió de potència (RMS/pic) | 120 W RMS / 600 W pic |
| Impedància | 8 ohms |
| Sistema d'altaveus | 2-Way (12" Woofer, 1" Tweeter) |
| Interval de freqüència | 55 Hz - 18 kHz |
| Max. Sound Pressure Level (SPL) | 96 dB |
| Angle de dispersió | 70° d'alt x 50° d'o |
| Connector d'entrada | 1x SPK-compatible |
| Connector de sortida | 1x SPK-compatible (Link Output) |
| Material de l'armari | Plàstic negre |
| Nanses | 3 integrated carrying handles |
| Muntatge | 35 mm stand flange with fixing screw |
| Dimensions (AxAxP) | 375 x 583 x 308 mm |
| Pes | 10.1 kg |
| Fabricant | McGrey |
| País d'origen | Xina |
Garantia i Suport
McGrey products are built to high quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official McGrey weblloc.
For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized McGrey dealer or the McGrey customer service department.
Informació de contacte:
- Weblloc: www.mcgrey.de
- Correu electrònic: support@mcgrey.de
Please have your product model (P212 MP) and serial number (if applicable) ready when contacting support.
