ECHOGEAR TV Cord Hider for Wall Mounted TV

Introducció

The ECHOGEAR TV Cord Hider is an in-wall power and cable management kit designed to conceal power cables and low-voltage wires behind your wall-mounted television. This system provides a clean, professional look by eliminating visible cords, while also offering convenient access to power outlets and USB charging ports directly behind your TV.

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR TV Cord Hider. Please read all instructions carefully before beginning installation.

Figure 1: ECHOGEAR TV Cord Hider main components.

Informació de seguretat

Always prioritize safety during installation. Failure to follow these safety guidelines may result in property damage, injury, or electrical shock.

• Seguretat elèctrica: Ensure power is turned off at the circuit breaker before working with any electrical components. If you are unsure about electrical wiring, consult a qualified electrician.
• Wall Integrity: Verify that the wall structure is suitable for installation. Avoid cutting into electrical wires, plumbing, or structural studs. Use a stud finder to locate studs and avoid them when cutting.
• Seguretat de les eines: Use caution when using the included drywall saw or any other cutting tools. Wear appropriate personal protective equipment, such as safety glasses and gloves.
• Gestió de cables: Do not overstuff the cable pass-through. Ensure cables are not pinched or damaged during installation.

Què hi ha a la caixa

Your ECHOGEAR TV Cord Hider kit includes all necessary components for a complete installation:

• Top Power Box (with 2 AC Outlets & 2 USB-A Ports)
• Bottom Cable Pass-Through Box
• Suport d’instal·lació
• Plantilla de tall
• Serres de guix
• 6-foot Low Profile Cordó d'extensió
• Cargols de muntatge

Figure 2: Included components in the ECHOGEAR kit.

Vídeo d'unboxing

Video 1: Official ECHOGEAR unboxing and overview of the TV Cord Hider kit.

Configuració i instal·lació

Seguiu aquests passos per a un procés d'instal·lació fluid:

1. Col·locació del pla: Determine the ideal location for both the top power box (behind the TV) and the bottom cable pass-through box (near an existing outlet). Ensure both locations are between the same two vertical wall studs and free of any horizontal obstructions.
2. Mark and Cut: Use the included cutting template to accurately mark the cutouts for both the top and bottom units on your drywall. Carefully use the provided drywall saw to cut out the marked sections.

Figure 3: Using the template and drywall saw for precise cuts.

3. Cables de ruta: Alimenteu el baix volumtage cables (HDMI, Ethernet, etc.) through the brush plate opening of the top power box. The unique cable catching design helps prevent cables from falling into the wall cavity.

Figure 4: Routing low-voltage cables through the brush plate.

4. Install Units: Insert the top power box and bottom cable pass-through box into their respective cutouts. Secure them using the provided mounting screws.
5. Connectar l'alimentació: Plug the included 6-foot low-profile extension cord into the bottom cable pass-through unit and then into an existing wall outlet. This powers the top unit.

Figure 5: Cables hidden behind a wall-mounted TV using the ECHOGEAR system.

Instruccions de funcionament

Once installed, the ECHOGEAR TV Cord Hider provides convenient power and cable access:

• Preses de CA: The top power box features two standard AC outlets. These are ideal for powering your TV, soundbar, streaming devices, or other electronics. The design allows for awkwardly shaped power plugs without obstructing the second outlet.
• Ports USB-A: Two USB-A ports are integrated into the top power box, perfect for charging streaming sticks, LED light strips, or other USB-powered accessories.

Figure 6: Utilizing the integrated USB-A ports for various devices.

• Volum baixtage Cable Pass-Through: The brush plate allows for easy routing of low-voltage cables such as HDMI, Ethernet, and audio cables, keeping them neatly organized and out of sight.

Figure 7: The ECHOGEAR system provides a clean, integrated look.

Manteniment

The ECHOGEAR TV Cord Hider requires minimal maintenance. Periodically inspect the units and cables for any signs of wear or damage. Ensure all connections remain secure. Clean the visible surfaces with a soft, dry cloth as needed.

Resolució de problemes

If you encounter issues with your ECHOGEAR TV Cord Hider, consider the following common solutions:

• Sense alimentació a les preses de corrent/ports USB:
  • Verify that the 6-foot extension cord is securely plugged into both the bottom cable pass-through unit and a functioning wall outlet.
  • Check your home's circuit breaker to ensure the outlet is receiving power.
• Cables Not Fitting Through Pass-Through:
  • Ensure you are routing low-voltage cables (HDMI, Ethernet, etc.) through the brush plate, not power cables.
  • Avoid forcing too many cables through at once. The brush plate is designed to accommodate multiple cables but has limits.
• Plugs Obstructing Other Outlets:
  • Some larger power adapters (often called "wall warts") may block adjacent outlets. Consider using a short extension cord or a flexible adapter if this occurs.

For further assistance, refer to the support information below.

Especificacions

Garantia i Suport

ECHOGEAR stands by its products. For warranty information or technical support, please visit the official ECHOGEAR website or refer to the contact details provided in your product packaging. Our US-based support team is available to assist you with any questions or installation challenges.

You can also find additional installation videos and resources on the ECHOGEAR website to help simplify your DIY process.