Producte acabatview
The SKIL CB7478C-11 PWR CORE 40 Brushless 40V 14" String Trimmer and Leaf Blower Combo Kit offers powerful, cordless performance for lawn care. Featuring a digital brushless motor for efficiency and extended run times, this kit includes a 14-inch string trimmer with a patented Twist Load Head and a dual-line bump feed, alongside a leaf blower with a turbine fan design providing up to 500 CFM of clearing power and a Power Boost feature. The kit comes complete with a PWR CORE 40 2.5Ah Lithium Battery and an Auto PWR JUMP Charger.
Figure 1: The SKIL CB7478C-11 Combo Kit, featuring both the string trimmer and leaf blower.
Informació important de seguretat
WARNING: Always wear eye protection and gloves when using this product. Be aware of flying debris and potential cuts from the trimmer line. Do not operate this product without proper safety gear.
Read and understand all instructions before using the product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
Configuració
1. Càrrega de la bateria
Before first use, fully charge the PWR CORE 40 2.5Ah Lithium Battery using the Auto PWR JUMP Charger. Insert the battery into the charger, ensuring it clicks into place. The charger's indicator lights will show the charging status. A full charge typically takes approximately 40-60 minutes.
2. Muntatge de la desbrossadora
- Attach the guard to the trimmer head using the provided fasteners. Ensure it is securely tightened to prevent debris from flying towards the operator.
- Adjust the auxiliary handle to a comfortable position for optimal balance and control. Loosen the knob, slide the handle to the desired height, and tighten the knob securely.
- Insert the fully charged PWR CORE 40 battery into the battery port on the trimmer until it locks into place.
3. Conjunt del bufador de fulles
- Attach the blower tube to the main housing of the leaf blower. Twist or push until it securely locks.
- Insert the fully charged PWR CORE 40 battery into the battery port on the blower until it locks into place.
Instruccions de funcionament
1. Using the String Trimmer
- Inici: Premeu el botó de bloqueig de seguretat i després premeu el gallet per engegar la retalladora.
- Control de velocitat: The variable speed lever allows you to adjust the cutting speed for different tasks, from light trimming to cutting thick weeds.
- Line Advancement (Twist Load Head): To advance the trimmer line, simply tap the trimmer head on the ground while the tool is running. The patented Twist Load Head makes line loading easy: insert the line and twist to get started.
- Vora: The trimmer head can be rotated for edging tasks. Consult the product diagram for specific rotation instructions.
Figure 2: The SKIL PWR CORE 40 String Trimmer effectively cutting grass along a pathway.
Figure 3: Close-up of the patented Twist Load Head on the SKIL String Trimmer, showing easy line insertion.
2. Using the Leaf Blower
- Inici: Press the safety lock-off button and then squeeze the trigger to start the blower.
- Control de velocitat: The variable speed lever allows you to control the airflow for various tasks, from clearing delicate flower beds to moving heavy debris.
- Potència: For stubborn debris or maximum clearing power, activate the Power Boost feature. This amplifies the blower's performance up to 500 CFM.
- Control de creuer: Engage the cruise control feature to maintain a consistent blowing speed without continuously holding the trigger.
Figure 4: The SKIL PWR CORE 40 Leaf Blower in action, efficiently clearing a large pile of leaves from a paved area.
Manteniment
- Neteja: After each use, disconnect the battery and clean the tools with a damp cloth. Remove any grass clippings or debris from the trimmer head, guard, and blower intake/output vents.
- Substitució del fil de la retalladora: When the trimmer line is depleted, replace it with 0.095-inch diameter line. Refer to the Twist Load Head instructions for easy replacement.
- Cura de la bateria: Guardeu les piles en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes. No emmagatzemeu les piles descarregades durant períodes prolongats.
- Emmagatzematge: Store the tools in a dry, secure location, out of reach of children.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'inicia | Bateria no inserida correctament o descarregada. Bloqueig de seguretat no activat. | Ensure battery is fully charged and properly seated. Press safety lock-off before squeezing trigger. |
| Potència/rendiment reduït | Low battery charge. Debris obstructing vents/head. | Recharge battery. Clean tool thoroughly, especially vents and cutting/blowing areas. |
| El fil de la retalladora no avança | Line tangled or depleted. | Tap trimmer head on ground while running. If still not advancing, replace trimmer line. |
Especificacions
- Marca: Habilitat
- Número de model: CB7478C-11
- Font d'alimentació: Funciona amb bateria (40 V)
- Bateria: Necessita 1 bateria de ions de liti (inclosa)
- String Trimmer Size: 14 polzades
- Leaf Blower Airflow: Fins a 500 CFM
- Pes de l'article: 13.16 lliures
- Dimensions del producte: 37.99" de llargada x 7.87" d'amplada
- UPC: 039725001252
Garantia i Suport
For warranty information, please refer to the documentation included with your product or visit the official Skil website. For technical support, troubleshooting assistance, or to order replacement parts, please contact Skil customer service directly.
Online resources and FAQs may also be available on the Skil weblloc.
