MIWAT 20W Plug-in LED Motion Sensor Flood Light User Manual

1. Introducció

Gràcies per la compraasing the MIWAT 20W Plug-in LED Motion Sensor Flood Light. This product is designed to provide efficient and reliable security lighting for both outdoor and indoor environments. Equipped with a PIR (Passive Infrared) motion sensor, it offers automatic illumination when motion is detected, enhancing safety and convenience while saving energy.

Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your flood light.

2. Informació de seguretat

• Desconnecteu sempre l'alimentació abans d'instal·lar, revisar o netejar l'aparell.
• Assegureu-vos que la font d'alimentació voltage matches the product's requirements (110V AC).
• No mireu directament a la font de llum LED quan estigui encesa, ja que podeu causar fatiga o danys visuals.
• This product is rated IP66 for rainproof protection. While suitable for outdoor use, avoid submerging it in water.
• Si no teniu cap dubte sobre el cablejat elèctric, la instal·lació l'ha de dur a terme un electricista qualificat.
• Mantenir el producte allunyat de materials inflamables.

3. Contingut del paquet

• 1 x MIWAT 20W LED Motion Sensor Flood Light
• Mounting Screws (Light kit included)
• Manual d'usuari (Aquest document)

4. Producte acabatview

The MIWAT 20W LED Motion Sensor Flood Light features a compact design with a powerful LED array and an integrated PIR motion sensor. The sensor is adjustable to optimize detection range and light duration.

Figure 4.1: MIWAT 20W LED Motion Sensor Flood Light with integrated motion sensor and power cord.

Figure 4.2: Illustration of the 120-degree human motion sensor, demonstrating how it turns lights on when people approach and off when they leave.

Figura 4.3: Detallada view of the infrared sensor's adjustment dials for SENS (sensitivity), TIME (duration), and LUE (light sensor).

Figure 4.4: Key features including upgraded high thermal conductivity heatsinks for efficient heat dissipation, high-quality LED lamp beads for brightness and durability, and the 1.5m (4.9ft) power cord.

5. Configuració i instal·lació

The MIWAT flood light is designed for easy installation with its plug-in design, requiring no complex wiring. It comes with a 4.9ft (1.5m) power cord and a US plug.

Opcions de muntatge:

The flood light can be mounted on walls, ground, or ceilings using the adjustable bracket. Ensure the mounting surface is stable and can support the weight of the fixture.

Figure 5.1: Various mounting configurations: Wall Mounting, Ground Mounting, and Ceiling Mounting.

Passos d'instal·lació:

1. Tria la ubicació: Select a suitable location for installation, considering the desired lighting area and motion detection coverage.
2. Marca els punts de perforació: Use the mounting bracket as a template to mark the drilling points on the wall, ground, or ceiling.
3. Forats: Drill holes at the marked points. Insert wall anchors if necessary for secure mounting.
4. Fixeu el suport: Fixeu el suport de muntatge a la superfície amb els cargols proporcionats.
5. Mount Light Fixture: Attach the flood light fixture to the secured bracket. Adjust the angle of the light and the motion sensor as needed. The bracket allows for 180-degree adjustment.
6. Connectar: Connecteu el cable d'alimentació a una presa estàndard de 110 V CA.

For a detailed installation guide, you may refer to the official Installation Manual (PDF) available online.

6. Instruccions de funcionament

The MIWAT flood light features an adjustable PIR motion sensor with three control dials:

• SENS (sensibilitat): Adjusts the detection distance of the motion sensor.
• TIME (Time Duration): Sets how long the light stays on after motion is detected.
• LUE (Light Sensor/Lux): Determines the ambient light level at which the sensor becomes active (dusk to dawn).

Adjusting Sensor Settings:

Refer to Figure 4.3 for the location of these dials on the sensor head.

• SENS (Distance): Turn the dial to adjust the sensing range. A higher setting increases the detection distance (radial travel: 1.5-2 meters, left-right travel: 2-10 meters).
• HORA: Turn the dial to set the duration the light remains on after motion is detected. The adjustable range is typically from 4 seconds to 2 minutes (150s max).
• LUE (Lux): Turn the dial to set the ambient light threshold. Towards the 'sun' icon, the sensor will activate in brighter conditions (day and night). Towards the 'moon' icon, it will only activate in darker conditions (night only).

Experiment with these settings to find the optimal configuration for your specific needs and environment.

7. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga durada del vostre llum d'inundació.

• Neteja: Netegeu periòdicament la làmpada i la lent del sensor amb un drap suau i sec.amp drap per eliminar la pols i les restes. No utilitzeu productes de neteja abrasius ni dissolvents.
• Inspecció: Regularly check the power cord and plug for any signs of damage. Ensure all mounting screws are tight.
• Distància lliure del sensor: Ensure the motion sensor is not obstructed by plants, furniture, or other objects that could interfere with its detection capabilities.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

MIWAT provides a 24 mesos de garantia for this product. If you encounter any product problems or require assistance, please contact MIWAT customer support.

To contact support, please refer to the 'Seller Contact' option on the product's purchase platform. We aim to respond to all inquiries within 24 hours.

Per a recursos addicionals, també podeu consultar la Manual d'instal·lació (PDF).