1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your EuropAce EWH 2100W Instant Water Heater. Please read these instructions thoroughly before installation and use, and retain this manual for future reference.
2. Informació de seguretat
Your safety is paramount. This appliance has been designed with multiple safety features. Adhere to all warnings and instructions to prevent injury or damage.
- Instal·lació professional: Installation must be performed by a qualified electrician and plumber in accordance with local regulations and standards.
- Seguretat elèctrica: Ensure the power supply matches the appliance's requirements (3300 watts). Do not operate with damaged cords or plugs.
- Pressió de l'aigua: The unit is suitable for both high and low water pressure environments. However, ensure stable water supply during operation.
- Doble protecció de seguretat: The heater features a built-in auto water flow-sensor device switch, which activates heating only when sufficient water flow is detected.
- Anti-Scalding Thermal Safety: An upgraded anti-scalding thermal safety design prevents water from reaching dangerously high temperatures.
- Splash Proof Protection: The unit is designed with splash-proof features for enhanced safety in wet environments.
- Manteniment: Desconnecteu l'alimentació abans de qualsevol manteniment o neteja.
- Nens i persones vulnerables: Aquest aparell no està pensat per ser utilitzat per persones amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
3. Producte acabatview
The EuropAce EWH 2100W is an instant water heater designed for efficient and safe hot water delivery. It incorporates a high-quality UK technology heating element with UL standard approval and a durable copper tank.
Figure 3.1: EuropAce EWH 2100W Instant Water Heater with included black shower head and rail.
Figura 3.2: Frontal view of the EuropAce EWH 2100W Instant Water Heater unit, showing the power indicator, heating indicator, and temperature control knob.
The unit features an electronic variable power temperature control for precise temperature adjustment and comes with a stylish black shower set.
4. Especificacions
| Model | EWH 2100W |
| Marca | EuropaAce |
| Wattage | 3300 watts |
| Material | Copper (tank) |
| Tipus de muntatge | Mur |
| Dimensions del producte | 10 x 22 x 34 cm |
| Pes de l'article | 2.4 kg |
| Característiques especials | Double Safety Protection, Splash Proof Protection, Auto Water Flow-Sensor, Anti-Scalding Thermal Safety |
| Font d'alimentació | Elèctric amb cable |
5. Instal·lació (Configuració)
Important: Installation must be carried out by a qualified and licensed professional plumber and electrician. Incorrect installation can lead to electric shock, fire, or other hazards.
- Selecció del lloc: Choose a suitable wall location for mounting, ensuring it is within reach of water supply and electrical connections, and away from direct spray.
- Muntatge: Securely mount the heater unit to the wall using appropriate fasteners. Ensure the unit is level.
- Connexió d'aigua: Connect the water inlet and outlet pipes according to the markings on the unit. Ensure all connections are watertight.
- Connexió elèctrica: Connect the unit to a dedicated electrical circuit with appropriate circuit breakers, following local electrical codes. Ensure proper grounding.
- Primer ús: Before switching on the power, open the water supply to the heater and allow water to flow through the shower head for a few minutes to purge any air from the system.
6. Funcionament
Operating your EuropAce EWH 2100W Instant Water Heater is straightforward.
- Encès: Ensure the main power switch to the heater is turned on. The "Power" indicator light on the unit will illuminate.
- Flux d'aigua: Turn on the water supply to the shower head. The built-in auto water flow-sensor will detect the water flow.
- Activació de la calefacció: Once sufficient water flow is detected, the heating element will activate, and the "Heating" indicator light will illuminate.
- Ajust de temperatura: Use the electronic variable power temperature control knob on the front of the unit to adjust the desired water temperature. Turn clockwise for hotter water, counter-clockwise for cooler water.
- Apagar: After use, turn off the water supply to the shower head. The heater will automatically stop heating. For extended periods of non-use, it is recommended to turn off the main power switch to the unit.
7. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament eficient del vostre escalfador d'aigua.
- Neteja: Netegeu l'exterior de la unitat amb un damp cloth. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
- Shower Head Cleaning: Periodically clean the shower head nozzles to prevent mineral buildup, which can affect water flow.
- Inspeccionar connexions: Regularly check water and electrical connections for any signs of leaks or damage. If any issues are found, contact a qualified professional for inspection and repair.
- Descalcificació: In areas with hard water, descaling may be required periodically. This procedure should only be performed by a qualified technician.
8. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves possibles solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| No hot water / Heater not turning on | Sense font d'alimentació Flux d'aigua insuficient Retall tèrmic activat | Check main power switch and circuit breaker. Ensure adequate water pressure and flow. Poseu-vos en contacte amb un tècnic qualificat per a una inspecció. |
| L'aigua no és prou calenta | Configuració de temperatura massa baixa Alta temperatura de l'aigua d'entrada Baixa pressió d'aigua | Adjust temperature control knob to a higher setting. This is normal for instant heaters; consider reducing flow rate slightly. Ensure stable water pressure. |
| El flux d'aigua és feble | Clogged shower head Low main water pressure | Clean shower head nozzles. Check household water supply. |
| Fuita de la unitat | Connexions soltes Danys als components interns | Immediately turn off water and power supply. Contact a qualified technician. |
If the problem persists after attempting these solutions, please contact EuropAce customer support or a qualified service technician.
9. Garantia i Suport
For warranty information, please refer to the warranty card provided with your purchase or visit the official EuropAce weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
For technical support, spare parts, or service inquiries, please contact EuropAce customer service. Contact details can typically be found on the product packaging or the official brand weblloc.
