Paulmann 93096

Paulmann 93096 Calla LED Recessed Spotlights Kit (3-Pack) - Instruction Manual

Model: 93096

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Paulmann 93096 Calla LED Recessed Spotlights Kit. This kit includes three versatile, matte black LED spotlights designed for various indoor environments, including damp rooms, thanks to their IP65 splash protection. Key features include the White Switch function for adjustable color temperature and an integrated memory function.

Please read these instructions carefully before installation and use to ensure safe and optimal performance of your Paulmann Calla LED spotlights. Keep this manual for future reference.

Paulmann 93096 Calla LED Recessed Spotlights Kit packaging and a single spotlight

Image: Paulmann 93096 Calla LED Recessed Spotlights Kit, showing the product packaging and a single spotlight unit.

1. Configuració i instal·lació

Before beginning installation, ensure the main power supply is switched off at the circuit breaker to prevent electrical shock. Installation should be performed by a qualified electrician if you are unsure.

1.1 Eines necessàries (no incloses)

  • Hole saw (68 mm diameter)
  • Tornavís
  • Pelacables
  • Voltage provador

1.2 Passos d'instal·lació

  1. Prepareu el forat de muntatge: Using a 68 mm diameter hole saw, cut a circular opening in the ceiling or mounting surface. Ensure the cavity depth is at least 40 mm, with an installation depth of 55 mm required for the fixture.
  2. Installation diagram for Paulmann Calla LED spotlight showing dimensions

    Image: Detailed installation diagram illustrating the required hole diameter (68mm), fixture diameter (90mm), minimum cavity depth (40mm), and total installation depth (55mm).

  3. Connexió elèctrica: Open the connection box attached to each spotlight. Connect the main power supply wires (Live 'L' and Neutral 'N') to the corresponding terminals within the connection box. Ensure all connections are secure.
  4. Close-up of the Paulmann LED spotlight connection box with L and N terminals

    Imatge: Primer pla view of the electrical connection box, showing the 'L' (Live) and 'N' (Neutral) terminals for wiring.

  5. Assegura el focus: Fold back the spring clips on the sides of the spotlight fixture. Insert the spotlight into the prepared hole. The spring clips will automatically secure the fixture in place against the ceiling.
  6. Three Paulmann Calla LED spotlights with their connection boxes

    Image: A set of three Paulmann Calla LED spotlights, each connected to its individual wiring box, ready for installation.

  7. Repeat for all spotlights: Follow these steps for each of the three spotlights in the kit.
  8. Restaura l'alimentació: Once all spotlights are securely installed and wired, restore power at the circuit breaker.

Important: Ensure proper IP65 rating is maintained, especially in damp environments like bathrooms. The IP65 rating protects against dust ingress and low-pressure water jets from any direction.

Bathroom diagram showing different IP protection zones for lighting

Image: Diagram illustrating various IP protection zones within a bathroom, indicating where IP65 and IP67 rated fixtures are suitable. The Paulmann Calla spotlights are IP65 rated.

2. Instruccions de funcionament

2.1 White Switch Function (Color Temperature Adjustment)

The Paulmann Calla spotlights feature a "White Switch" function, allowing you to cycle through different color temperatures using your standard wall light switch.

  • To Change Color Temperature: Turn the light switch OFF and then immediately ON again. Each quick toggle will cycle the spotlight through the available color temperatures:
    • Warm White (3000K) - For a relaxing atmosphere.
    • Neutral White (4000K) - For general illumination and tasks.
    • Daylight White (6500K) - For bright, invigorating light.
  • Funció de memòria: The integrated memory function will save the last selected color temperature if the light remains ON for more than 5 seconds. The next time you turn the light on, it will recall the previously set color.
Three Paulmann Calla LED spotlights showing different color temperatures: warm white, neutral white, and daylight white

Image: Illustration of the White Switch function, displaying the three distinct color temperatures (Warm White, Neutral White, Daylight White) available from the spotlights.

Three Paulmann Calla LED spotlights with a visual representation of color temperature zones

Image: A visual representation of the color temperature zones within the spotlight, indicating the transition between warm and cool light.

2.2 Adjusting Spotlight Angle

The Calla spotlights are orientable, allowing you to direct the light beam precisely where needed. Gently tilt the inner light module to adjust the angle of illumination.

Close-up of a single Paulmann Calla LED spotlight showing its adjustable angle

Image: Close-up of a single Paulmann Calla LED spotlight, demonstrating its ability to be angled to direct light.

3. Manteniment

  • Neteja: To clean the spotlights, ensure the power is off. Use a soft, dry, or slightly damp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
  • Vida útil LED: The integrated LED light sources are designed for a long operational life. The LEDs are not replaceable. If an LED fails, the entire fixture must be replaced.
  • Inspecció: Periodically inspect the spotlights for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

4. Solució De Problemes

ProblemaCausa possibleSolució
Spotlight does not illuminate.Sense subministrament elèctric; cablejat solt; accessori defectuós.Check circuit breaker. Verify wiring connections in the junction box. If problem persists, contact support.
White Switch function not working.Switching too slowly; memory function active.Ensure quick OFF/ON toggles. If a color was set for >5 seconds, it will be recalled. Try multiple quick toggles.
La llum parpelleja o s'atenua inesperadament.Unstable power supply; loose connection; incompatible dimmer (if applicable).Check power supply stability. Verify all wiring connections. These spotlights are not explicitly stated as dimmable, avoid using with non-compatible dimmers.

5. Especificacions

CaracterísticaDetall
MarcaPaulman
Número de model93096
Dimensions del producte (L x A x A)9 x 9 x 5.5 cm
Pes480 g (for the kit)
Classificació de protecció d'entrada (IP).IP65 (A prova de pols, protegit contra dolls d'aigua)
Number of Spotlights3
EstilModern
ColorNegre mat
FormaRonda
MaterialPlàstic
Voltage230 Volts
Usos específicsHallway, Bathroom (damp àrees)
Característiques especialsWhite Switch (adjustable color temperature), Orientable
Tipus de font de llumLED integrat
Luminous Flux (per spotlight)550 lúmens
Power (per spotlight)5.5 Watts (Total 16.5 Watts for 3)
Incandescent Equivalent (per spotlight)48 watts
Índex de reproducció del color (CRI)80
Interval de temperatura de color3000K (Warm White), 4000K (Neutral White), 6500K (Daylight White)
Classe d'eficiència energèticaF
Tipus de muntatgeEncastat (sostre)
Diàmetre de forat requerit68 mm
Profunditat mínima de la cavitat40 mm
Profunditat d'instal·lació55 mm

6. Informació de la garantia

Paulmann provides a 5 any de garantia on this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, or unauthorized modifications.

Paulmann 5-year warranty logo on installation diagram

Image: The Paulmann 5-year warranty logo, as seen on the product's installation diagram.

7. Suport i contacte

For further assistance, technical support, or warranty claims, please contact Paulmann customer service. Refer to the official Paulmann weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.

Paulman Weblloc: www.paulmann.com

Documents relacionats - 93096

Preview Guia d'instal·lació i seguretat de la lluminària encastrada LED Paulmann
Guia completa per a les lluminàries encastades LED Paulmann, que cobreix la instal·lació, les instruccions de seguretat, la reemplaçabilitat dels components i la informació sobre l'eficiència energètica. Inclou els números de producte 934.39 a 934.45.
Preview Paulmann 925.29/925.30 LED Recessed Light Safety and Installation Guide
Detailed safety instructions and installation guide for Paulmann 925.29 and 925.30 LED recessed lights. Includes step-by-step diagrams and essential electrical connection information.
Preview Guia d'instal·lació de la lluminària de paret exterior Paulmann 947.78 Kikolo
Guia d'instal·lació completa per a la lluminària de paret exterior Paulmann 947.78 Kikolo. Inclou instruccions de seguretat, passos de muntatge, guia de cablejat i especificacions del producte per a aquesta llum exterior amb classificació IP65.
Preview Paulmann URail Track Spot Installation Guide - Model 976.13
Detailed installation instructions and safety information for the Paulmann URail track spot lighting system, model 976.13. Learn how to assemble and install your track lighting.
Preview Guia d'instal·lació de Paulmann Plug & Shine Floor Individual Spot IP67
Guia d'instal·lació completa per a la lluminària Paulmann Plug & Shine Floor Individual Spot IP67 LED, que detalla el muntatge, les connexions elèctriques, la reemplaçabilitat dels components i la informació de seguretat.
Preview Guia d'instal·lació de la lluminària encastada de terra LED Paulmann Plug & Shine Floor Mini Basic Set
Instruccions d'instal·lació i funcionament per a la lluminària encastrada de terra LED Paulmann Plug & Shine Floor Mini Basic Set (números d'art. 936.97, 936.98). Inclou informació sobre seguretat, passos d'instal·lació, reemplaçament i eliminació.