Manual d'usuari del dispositiu de massatge de percussió Hyperice Hypervolt Go 2

1. Introducció

The Hyperice Hypervolt Go 2 is a compact and lightweight handheld percussion massage device designed to help relieve sore muscles and stiffness. Featuring QuietGlide Technology and three speed settings, it provides effective muscle recovery and relaxation. This manual provides essential information for the safe and optimal use of your device.

Image: The Hyperice Hypervolt Go 2 in Arctic Grey, shown with its two interchangeable massage heads.

2. Informació de seguretat

Please read all safety warnings and instructions before using this device. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.

• Always use the device with the charging cable disconnected.
• No l'utilitzeu prop de l'aigua o en condicions humides.
• Be cautious when using on or near sensitive areas and follow proper body positioning techniques.
• Les declaracions sobre suplements dietètics no han estat avaluades per la FDA i no tenen la intenció de diagnosticar, tractar, curar o prevenir cap malaltia o afecció de salut.

3. Contingut del paquet

Your Hypervolt Go 2 package includes the following items:

• Hypervolt Go 2 device
• Power supply + adapters (for charging)
• Head attachments (2) - to tailor the device to best suit the area you're focused on.
• 5V USB-A to USB-C charging cable (not compatible with USB-C to USB-C cable)

Image: The Hypervolt Go 2 device, its charging cable, and two interchangeable massage heads.

4. Configuració

Before first use, ensure your Hypervolt Go 2 is fully charged.

1. Connect the provided 5V USB-A to USB-C charging cable to the charging port at the bottom of the device and to a suitable power adapter.
2. The LED light ring at the base of the handle will indicate the charging status. It will turn green when fully charged.
3. Once charged, disconnect the charging cable before operation.

5. Instruccions de funcionament

The Hypervolt Go 2 features a simple one-button operation for power and speed control.

1. Encès: Press and hold the power button located at the bottom of the handle. Release it once the LED lights illuminate, indicating it's powered on. The device will not operate while connected to the charging cable.
2. Seleccioneu la velocitat: Press the power button once to cycle through the three available speed settings. Each press will increase the intensity.
3. Apply to Muscles: Gently apply the massage head to the desired muscle area. Move the device slowly across the muscle, applying light to moderate pressure.
4. Apagar: To turn off the device, cycle through all speeds until the device stops, or press and hold the power button for a few seconds until the lights turn off.

Image: A user's hands demonstrating how to hold and operate the Hypervolt Go 2, highlighting the power button.

6. Capçals intercanviables

The Hypervolt Go 2 comes with two interchangeable head attachments to customize your massage experience:

• Cap pla: Ideal for larger muscle groups and general use.
• Cap de bala: Designed for more precise treatment and targeting specific knots or trigger points.

To change a head, simply pull the current head straight out from the device and push the desired head firmly into the opening.

7. Càrrega i durada de la bateria

The Hypervolt Go 2 is equipped with a rechargeable Lithium Metal battery, providing approximately 3 hours of battery life on a full charge. The LED light ring at the base of the handle indicates the battery level:

• Verd: Fully charged or high battery level.
• Groc/Taronja: Nivell de bateria mitjà.
• Vermell: Low battery, requires charging.

Use only the provided 5V USB-A to USB-C charging cable. The device is not compatible with USB-C to USB-C cables.

8. Manteniment

To ensure the longevity and optimal performance of your Hypervolt Go 2, follow these maintenance guidelines:

• Netegeu el dispositiu amb un anunciamp drap després de cada ús. No utilitzeu productes químics agressius ni netejadors abrasius.
• Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Keep the massage heads clean. They can be washed with mild soap and water. Ensure they are completely dry before reattaching.

9. Solució De Problemes

If you encounter any issues with your Hypervolt Go 2, refer to the following common troubleshooting tips:

• El dispositiu no s'encén: Ensure the device is fully charged. Press and hold the power button for at least 2 seconds. Confirm the charging cable is disconnected.
• Percussió feble: Check the battery level. If low, charge the device. Ensure the massage head is securely attached.
• Soroll inusual: Discontinue use and check for any obstructions around the massage head. If the issue persists, contact customer support.

10. Especificacions

Image: A visual representation of the Hypervolt Go 2's key specifications and design.

11. Garantia i Suport

For warranty information, product registration, or technical support, please visit the official Hyperice weblloc web o poseu-vos en contacte amb el servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

You can visit the official Hyperice store for more information: Hyperice Store