Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Accutime PAW4354 LED digital watch. Please read this guide thoroughly to ensure proper use and to maximize the lifespan of your watch.
Producte acabatview
Components
- LED Digital Display: Shows time, seconds, month, and day.
- Two Control Buttons: Located on the right side of the watch case for setting adjustments.
- Acrylic Strap: Adjustable and comfortable for wear.
- Integrated CR2032 Button Battery: Powers the watch (non-rechargeable, non-replaceable).
Característiques
- Clear LED digital display.
- Displays hours, minutes, seconds, month, and day.
- Admet els formats de 12 hores i de 24 hores.
- Simple operation with two side buttons.
- Durable and comfortable acrylic strap.
- Battery-saving LED display that turns off automatically after a few seconds.

Figura 1: Frontal view of the Accutime PAW4354 LED watch, displaying the time 10:10 and featuring Paw Patrol characters on the blue acrylic strap.

Figure 2: The Accutime PAW4354 LED watch shown in its retail packaging, highlighting the "LED WATCH" label and Paw Patrol branding.
Configuració
Ús inicial
Your Accutime PAW4354 watch comes with an integrated battery and is ready for use. Simply press one of the side buttons to activate the LED display and view l'hora actual.
Informació de la bateria
The watch is powered by an integrated CR2032 button battery. This battery is designed for long-term use and cannot be recharged or replaced. To conserve battery life, the LED display automatically turns off after a few seconds of inactivity.
Instruccions de funcionament
The watch features two buttons on the right side of the case. For the purpose of these instructions, we will refer to them as Button A (top) and Button B (bottom).
Configuració de l'hora i la data
- Activa la pantalla: Press Button A once to turn on the LED display.
- Entra al mode de configuració: Press and hold Button A for approximately 3 seconds until the hour digits begin to flash.
- Horari establert: While the hour digits are flashing, press Button A repeatedly to advance the hour. Press Button B once to confirm the hour and move to setting the minutes.
- Establir minuts: While the minute digits are flashing, press Button A repeatedly to advance the minutes. Press Button B once to confirm the minutes and move to setting the month.
- Estableix el mes: While the month digits are flashing, press Button A repeatedly to advance the month. Press Button B once to confirm the month and move to setting the day.
- Dia establert: While the day digits are flashing, press Button A repeatedly to advance the day. Press Button B once to confirm the day and exit setting mode.
- Sortir del mode de configuració: If no buttons are pressed for a few seconds during setting, the watch will automatically exit setting mode.
Switching 12/24 Hour Mode
- Activa la pantalla: Press Button A once to turn on the LED display.
- Entra al mode de configuració: Press and hold Button A for approximately 3 seconds until the hour digits begin to flash.
- Navigate to Hour Format: Continue pressing Button B until the 'AM' or 'PM' indicator (for 12-hour mode) or a 'H' (for 24-hour mode) starts flashing.
- Change Format: Press Button A to toggle between 12-hour (with AM/PM) and 24-hour formats.
- Confirm and Exit: Press Button B to confirm your selection and exit the setting mode.
Manteniment
- Neteja: Netegeu la caixa i la corretja del rellotge amb un drap suau iamp tela. Eviteu utilitzar productes químics o materials abrasius.
- Resistència a l'aigua: This watch is not specified as water-resistant. Avoid exposing it to water, moisture, or extreme humidity.
- Emmagatzematge: Guardeu el rellotge en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no l'utilitzeu.
- Impacte: Avoid dropping the watch or subjecting it to strong impacts, as this may damage the internal components or the display.
Resolució de problemes
| Problema | Solució |
|---|---|
| La pantalla no s'il·lumina. | Press Button A firmly. If it still does not light up, the battery may be depleted. As the battery is non-replaceable, the watch has reached the end of its operational life. |
| L'hora/data és incorrecta. | Follow the "Setting Time and Date" instructions in the Operating Instructions section to reset the time and date. |
| Els botons no responen. | Ensure the buttons are not stuck. If the issue persists, the watch may have an internal malfunction. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | PAW4354 |
| Tipus de visualització | LED digital |
| Material de la corretja | Acrílic |
| Strap Dimensions | 21.7 cm (llargada) x 2.2 cm (amplada) |
| Dimensions de la caixa | 3.8 cm (length) x 3.7 cm (width) x 0.9 cm (thickness) |
| Pes | 24 grams |
| Tipus de bateria | CR2032 Button Battery (integrated, non-replaceable) |
| Formats de temps | De 12 hores i 24 hores |
Garantia i Suport
Information regarding specific warranty terms and customer support for the Accutime PAW4354 watch is not provided in this manual. Please refer to the product packaging or contact the retailer for details on warranty coverage and support options.





