Producte acabatview
The Camco Eaz-Lift Large Side Wind Jack Foot is designed as an interchangeable or replacement component for your RV trailer jack. This foot enhances stability and support for your trailer when parked, distributing weight more effectively on various surfaces. Constructed from durable, zinc-plated steel, it offers a robust solution for trailer leveling and stabilization.
Característiques clau
- Peça de recanvi: An interchangeable or replacement foot for your trailer jack.
- Provides Jack Support: Jack foot helps support and stabilize your trailer jack to the ground when parked.
- Capacitat d'elevació: Rated for a 5,000 lb. lift capacity.
- Compatibilitat: Works with jack tubes featuring a 2-inch inner diameter (ID). Suitable for use with 2,000 lb. to 5,000 lb. jacks.
- Dimensions: Measures 7 ¼-inches (L) x 3 ¾-inches (W) x 1 ¾-inches (H).
- Inclou: One (1) trailer foot jack and one (1) clevis pin for secure attachment.
- Construcció duradora: Manufactured from durable, zinc-plated steel for longevity and corrosion resistance.
Components inclosos
The Camco Eaz-Lift Large Side Wind Jack Foot package includes the following items:
- One (1) Eaz-Lift Jack Foot
- One (1) Clevis Pin
Configuració i instal·lació
Follow these steps to properly install your Camco Eaz-Lift Large Side Wind Jack Foot:
- Prepare the Jack: Ensure your trailer jack is fully retracted and the trailer is securely supported by other means (e.g., wheel chocks, safety stands) to prevent accidental movement.
- Remove Existing Foot (if applicable): If replacing an old jack foot, remove the existing clevis pin or retaining hardware and slide the old foot off the jack tube.
- Verificar la compatibilitat: Confirm that your trailer jack tube has a 2-inch inner diameter (ID) for proper fitment of the Eaz-Lift Jack Foot.
- Attach New Foot: Slide the Camco Eaz-Lift Jack Foot onto the bottom of the trailer jack tube. Align the holes on the jack foot with the corresponding holes on the jack tube.
- Secure with Clevis Pin: Insert the provided clevis pin through the aligned holes of the jack foot and the jack tube. Secure the clevis pin with its retaining clip to ensure it does not dislodge during use.
- Prova d'instal·lació: Slowly lower the trailer jack to ensure the new foot is securely attached and provides stable support.
Referència del vídeo d'instal·lació
For a visual guide on installing a heavy-duty trailer jack foot, please refer to the video below. While the specific product in the video may vary, the installation principles are similar.
Instruccions de funcionament
The Camco Eaz-Lift Jack Foot is designed to simplify the process of stabilizing your trailer. Once installed, operate your trailer jack as usual. The large foot plate will provide a wider, more stable base on various terrains, reducing the risk of the jack sinking into soft ground or shifting.
- Lowering the Jack: Extend your trailer jack until the Eaz-Lift foot makes firm contact with the ground. Ensure the trailer is level and stable.
- Aixecant el Jack: Retract your trailer jack when preparing to move the trailer. The foot will lift with the jack.
- Estabilitat millorada: The wide base of the foot helps prevent the jack from sinking into soft soil, asphalt, or other uneven surfaces, providing consistent support.
Manteniment
To ensure the longevity and optimal performance of your Camco Eaz-Lift Large Side Wind Jack Foot, consider the following maintenance tips:
- Inspecció periòdica: Periodically inspect the jack foot and clevis pin for any signs of wear, damage, or corrosion.
- Neteja: Clean the jack foot as needed to remove dirt, mud, or debris that may accumulate during use. A simple wipe-down with a damp la tela sol ser suficient.
- Lubricació: While the zinc-plated steel offers corrosion resistance, applying a light coat of rust-inhibiting lubricant to the clevis pin and its insertion points can help maintain smooth operation and prevent seizing.
- Emmagatzematge: When not in use for extended periods, store the jack foot in a clean, dry place to protect it from harsh elements.
Especificacions del producte
| Atribut | Detall |
|---|---|
| Marca | Camco |
| Número de model | 50007 |
| Pes de l'article | 1.73 lliures |
| Dimensions del paquet | 8.46 x 4.76 x 3.11 polzades |
| Capacitat de càrrega | 5,000 lliures |
| Compatibilitat | 2-inch ID jack tubes (for 2,000 lb. to 5,000 lb. jacks) |
| Material | Acer zincat |
| Color | Plata |
| UPC | 014717500074 |
Garantia i Suport
For specific warranty information, product support, or to inquire about replacement parts, please contact Camco customer service directly. You can find more information and contact details on the official Camco weblloc web o a través de la seva botiga d'Amazon: Camco Store on Amazon.
