Xanlite Motion-Sensing Auxiliary Light

Introducció

Thank you for choosing the Xanlite Motion-Sensing Auxiliary Light. This compact and efficient LED light is designed to provide convenient illumination in various indoor spaces, such as cabinets, closets, and study rooms. Featuring motion-sensing technology and a cool white light output of 200 lumens, it offers practical, battery-powered lighting. Please read this manual carefully before installation and use to ensure proper operation and longevity of your device.

Informació de seguretat

• Aquest producte està destinat a només per a ús interiorNo l'exposeu a l'aigua ni a una humitat elevada.
• Do not attempt to disassemble or modify the light. This may void the warranty and cause damage.
• Mantenir fora de l'abast dels nens.
• Assegureu-vos que les piles estiguin inserides amb la polaritat correcta (+/-).
• Remove batteries if the light will not be used for an extended period.
• Eliminar les bateries usades de manera responsable d'acord amb la normativa local.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x Xanlite Motion-Sensing Auxiliary Light (ECP150CW)
• Batteries (Alkaline)

Configuració

Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part posterior de la unitat de llum.
2. Obriu la tapa del compartiment de la bateria.
3. Insert the included Alkaline batteries, ensuring correct polarity as indicated inside the compartment.
4. Tanqueu bé la tapa del compartiment de la bateria.

Muntatge de la Llum

The light is designed for surface mounting, typically on ceilings or inside cabinets. It features a removable fixture type for ease of installation and battery replacement.

Imatge: De dalt a baix view of the Xanlite Motion-Sensing Auxiliary Light, highlighting its circular design and central sensor.

• Choose a clean, dry, and flat surface for mounting.
• The light may include an adhesive backing or mounting holes for screws (check your specific packaging for included mounting hardware).
• If using adhesive, peel off the protective film and firmly press the light onto the desired surface for at least 30 seconds.
• If using screws, mark the desired mounting points, drill pilot holes if necessary, and secure the light using appropriate screws.

Instruccions de funcionament

The Xanlite Motion-Sensing Auxiliary Light operates primarily through its integrated motion sensor and touch control.

• Mode automàtic: Once batteries are installed and the light is mounted, it will automatically activate when motion is detected within its sensing range in low-light conditions. The light will turn off after a period of no motion.
• Manual Control (Touch): The light features a touch switch. Gently touch the designated area on the light to manually turn it on or off, overriding the motion sensor if needed.

Manteniment

• Neteja: Netegeu el llum amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Substitució de la bateria: When the light dims or stops functioning, replace all batteries with new Alkaline batteries of the same type.
• Emmagatzematge: If storing the light for an extended period, remove the batteries to prevent leakage.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Xanlite weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

Manufacturer: XANLITE