Manual d'usuari del suport de braç de micròfon ajustable de gran resistència FIFINE BM63

1. Introducció

Thank you for choosing the FIFINE BM63 Heavy-Duty Adjustable Microphone Arm Stand. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new microphone arm stand. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Image 1.1: The FIFINE BM63 Microphone Arm Stand in its extended position.

2. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• 1 x Boom Arm Stand
• 1 x Escriptori Clamp
• 3 x Velcro Cable Ties
• 1 x Manual d'usuari (aquest document)

Image 2.1: Visual representation of the included components: boom arm, desk clamp, and cable ties.

3. Instruccions de configuració

3.1 Mounting the Desk Clamp

1. Identify a suitable location on your desk. The desk clamp is designed for desktops with a thickness of 2 inches (5 cm) or less. Ensure the mounting surface is stable and can support the weight of the arm and microphone.
2. Unscrew the knob on the desk clamp until the opening is wide enough to fit over your desk edge.
3. Feu lliscar el clamp onto the edge of your desk.
4. Tighten the knob securely until the clamp is firmly attached to the desk. Do not overtighten, as this may damage your desk.

Imatge 3.1: Detallada view de l'escriptori clamp being secured to a desktop.

Image 3.2: Illustration showing the maximum desk thickness of 2 inches for clamp compatibilitat.

3.2 Attaching the Boom Arm

1. Insert the base of the boom arm into the hole on the top of the desk clamp.
2. Tighten the side screw on the clamp to secure the boom arm in place. This allows the arm to rotate 360 degrees.

3.3 Attaching Your Microphone

1. The FIFINE BM63 features a universal 5/8-inch screw adapter. Carefully screw your microphone (or its shock mount/clip) onto the threaded adapter at the end of the boom arm.
2. Ensure the microphone is securely fastened to prevent accidental drops.

Image 3.3: The universal 5/8-inch screw adapter for microphone attachment.

3.4 Gestió de cables

Use the included velcro cable ties to neatly secure your microphone cable along the boom arm. This helps maintain a tidy workspace and prevents cables from interfering with arm movement.

Image 3.4: Velcro cable ties used to organize microphone cables along the arm.

4. Instruccions de funcionament

4.1 Adjusting the Arm Position

The BM63 boom arm offers flexible adjustment for optimal microphone positioning:

• Ajust vertical: The arm can be stretched vertically up to 180 degrees.
• Ajust horitzontal: The arm can be adjusted horizontally up to 135 degrees.
• Rotació: The arm can rotate 360 degrees at its base, allowing you to swing it into or out of your workspace as needed.

Gently move the arm to your desired position. The internal spring mechanism will hold it in place. For precise adjustments, you may need to slightly loosen and then re-tighten the pivot points if they feel too stiff or too loose.

Image 4.1: Diagram illustrating the flexible adjustment capabilities of the boom arm, including vertical and horizontal reach.

Image 4.2: Visual representation of the 360-degree rotation feature at the arm's base.

Capacitat de pes 4.2

The BM63 boom arm is designed to support microphones weighing up to 2 kg (4.4 lbs). Ensure your microphone's weight does not exceed this limit to maintain stability and prevent damage to the arm or microphone.

Image 4.3: Indication of the 2 kg (4.4 lbs) maximum weight capacity for the microphone arm.

5. Manteniment

• Inspeccioneu regularment tots els cargols i connexions per assegurar-vos que estiguin ben ajustats.
• Clean the arm stand with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• If the arm's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with any electrical components.

6. Solució De Problemes

• Arm not holding position: Ensure all pivot point screws are adequately tightened. If the arm is overloaded, reduce the microphone weight.
• Microphone not fitting: Verify that your microphone or its accessory (shock mount, clip) uses a 5/8-inch threaded connection. Adapters for 3/8-inch threads are commonly available if needed.
• Escriptori clamp unstable: Torneu a apretar les pinces de l'escriptoriamp. Ensure your desk thickness is within the 2-inch limit and that the clamp està en una superfície plana i estable.

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or any inquiries regarding your FIFINE BM63 Microphone Arm Stand, please contact FIFINE customer service through their official website or the retailer where the product was purchased. Please have your model number (BM63) and purchase details ready.