Manual d'usuari de l'altaveu Bluetooth portàtil KREAFUNK aGO II Tissu

1. Introducció

Thank you for choosing the KREAFUNK aGO II Tissu Portable Bluetooth Speaker. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it carefully before use and retain it for future reference.

2. Contingut del paquet

Assegureu-vos que tots els elements siguin presents al paquet:

• KREAFUNK aGO II Tissu Portable Bluetooth Speaker
• Cable de càrrega USB a USB-C
• Manual d'usuari (aquest document)

3. Producte acabatview

The KREAFUNK aGO II Tissu is a compact and waterproof portable Bluetooth speaker designed for high-quality audio on the go. It features a durable construction with upcycled fabric and leather elements.

Figura 3.1: Frontal view of the KREAFUNK aGO II Tissu speaker, showcasing its soft yellow casing, grey fabric grille, and brown leather strap.

Controls i Ports

Figura 3.2: lateral view of the speaker, illustrating the power button, volume controls, and the USB-C charging port.

• Botó d'encesa: Manteniu premut per activar/desactivar.
• Botó Pujar volum/Pista següent: Premeu curt per pujar el volum, premeu llargament per passar a la següent pista.
• Botó per baixar el volum/pista anterior: Premeu curt per baixar el volum, premeu llargament per anar a la pista anterior.
• Port de càrrega USB-C: Per connectar el cable de càrrega.

4. Configuració

4.1. Carregant l’altaveu

Before first use, fully charge your aGO II Tissu speaker.

1. Connect the small end of the included USB-C charging cable to the USB-C port on the speaker.
2. Connecteu l'extrem USB estàndard del cable a un adaptador de corrent USB (no inclòs) o al port USB d'un ordinador.
3. The LED indicator will show charging status (e.g., red for charging, off or green for fully charged, refer to product specific LED behavior if available).
4. Un cop estigui completament carregat, desconnecteu el cable.

4.2. Encès / apagat

• Per encendre: Press and hold the Power Button for approximately 3 seconds until you hear an audible cue or see the LED indicator light up.
• Per apagar: Press and hold the Power Button for approximately 3 seconds until you hear an audible cue or the LED indicator turns off.

5. Instruccions de funcionament

5.1. Emparellament Bluetooth

To connect your aGO II Tissu speaker to a Bluetooth-enabled device (smartphone, tablet, laptop):

1. Ensure the speaker is powered on and in pairing mode (the LED indicator will typically flash blue rapidly). If not, you may need to press and hold the Bluetooth button (often combined with the power button or a dedicated button) to initiate pairing mode.
2. On your device, go to the Bluetooth settings.
3. Cerca available devices. You should see "KREAFUNK aGO II Tissu" or a similar name in the list.
4. Select the speaker to pair. Once paired, the LED indicator will usually turn solid blue, and you will hear a confirmation sound.
5. L'altaveu intentarà tornar a connectar-se automàticament amb l'últim dispositiu emparellat quan s'engegui.

5.2. Reproducció i controls d'àudio

• Reproduir/pausa: Short press the Power Button (or a dedicated Play/Pause button if available).
• Ajust de volum: Premeu breument els botons de pujar el volum (+) o baixar el volum (-).
• Pista següent: Premeu llargament el botó d'apujar el volum (+).
• Pista anterior: Premeu llargament el botó per baixar el volum (-).
• Control de veu: The speaker supports voice control functionality, likely by passing through commands to your connected smartphone's voice assistant. Press the Power Button (or a dedicated button) to activate your device's voice assistant.

5.3. Característica impermeable

The aGO II Tissu speaker is waterproof. This means it can withstand splashes and light rain. However, it is not designed for submersion in water. Ensure the USB-C charging port cover is securely closed before exposing the speaker to moisture.

6. Manteniment

6.1. Neteja

To clean your speaker, use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the speaker's finish and fabric grille.

6.2. Emmagatzematge

Guardeu l'altaveu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes. Si l'emmagatzemeu durant un període prolongat, carregueu la bateria periòdicament per mantenir-ne la vida útil.

7. Solució De Problemes

If you encounter issues with your aGO II Tissu speaker, refer to the following common problems and solutions:

8. Especificacions

• Marca: KREAFUNK
• Nom del model: aGO II Tissu
• Número de model: KFWT146
• Color: Soft Yellow
• Tecnologia de connectivitat: Bluetooth, USB
• Tecnologia de comunicació sense fils: Bluetooth
• Mida de l'altaveu: 53 mm
• Potència màxima de sortida dels altaveus: 6 watts
• Mètode de control: Veu (mitjançant un dispositiu connectat)
• Font d'alimentació: Electric Cable (for charging internal battery)
• Impermeable: Sí
• Material: Plastic, silicone, upcycled leather, upcycled fabric grille, metal
• Usos recomanats: Per a telèfon intel·ligent o tauleta
• Dispositius compatibles: Ordinador portàtil, telèfon intel·ligent, tauleta
• Components inclosos: Cable de càrrega USB a USB-C

9. Informació de seguretat

• No exposeu l'altaveu a temperatures extremes, llum solar directa ni flames obertes.
• No intenteu desmuntar, reparar o modificar l'altaveu. Això anul·larà la garantia i pot causar danys o lesions.
• Mantingueu l'altaveu allunyat de camps magnètics forts.
• Eviteu deixar caure o sotmetre l'altaveu a forts impactes.
• Ensure the charging port cover is sealed when near water to maintain waterproof integrity.
• Desfeu-vos de l'altaveu i la bateria de manera responsable d'acord amb la normativa local.

10. Garantia i Suport

KREAFUNK products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KREAFUNK website. Please have your model number (KFWT146) and proof of purchase ready when contacting support.