Manual d'instruccions del cotxe RC HYPER GO H16DR a escala 1:16

Introducció

This instruction manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HYPER GO H16DR 1:16 Scale Remote Control Car. Please read this manual thoroughly before operating the vehicle to ensure proper usage and to maximize its lifespan.

Figure 1: The HYPER GO H16DR RC car and its included accessories, including the remote control, batteries, and spare shocks.

Precaucions de seguretat

Operating remote control vehicles requires caution. Adhere to the following safety guidelines:

• Feu servir sempre el cotxe RC en zones obertes, lluny de persones, mascotes i obstacles.
• Do not operate near public roads, water bodies, or electrical lines.
• Ensure the battery is fully charged before use and disconnect it when not in use.
• Use only the provided charging cable and LiPo batteries. Improper charging or battery types can cause fire or injury.
• Mantingueu els dits, els cabells i la roba solta lluny de les peces mòbils.
• Es recomana la supervisió d'un adult per a usuaris menors de 14 anys.
• If the vehicle becomes stuck, do not force it. Turn off the remote and the vehicle, then retrieve it manually.
• The LiPo battery features a flame-retardant material shell for enhanced safety. Always store batteries in a cool, dry place.

Figure 2: The LiPo battery with flame-retardant casing, designed for enhanced safety during operation and storage.

Què hi ha a la caixa

Verifiqueu que tots els components siguin presents en desembalar:

• 1 x HYPER GO H16DR RC Truck (RE353 Smart ESC installed)
• 1 x T3A 2.4Ghz 3-Channel Radio Remote Control
• 2 x 2S 7.4V 1050mAh 25C LiPo Battery
• 1 x Head-up Wheel Kit
• 1 x cable de càrrega USB
• 1 x tornavís
• 1 x Manual del producte (aquest document)

Figure 3: Contents of the HYPER GO H16DR package, including the truck, remote, batteries, and essential tools.

Guia de configuració

1. Charging the LiPo Battery

Before first use, fully charge both LiPo batteries using the provided USB charging cable. Connect the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter) and then to the battery. The charging indicator will show the charging status (refer to charger's specific light indicators).

• El temps de càrrega pot variar segons la font d'alimentació.
• No deixeu les piles sense vigilància mentre es carreguen.
• Desconnecteu la bateria un cop estigui completament carregada.

2. Installing the Battery in the RC Truck

Carefully open the battery compartment on the underside of the truck. Insert a charged LiPo battery, ensuring the connectors align. Securely close the compartment.

3. Remote Control Setup and Pairing

Install 3x AA batteries (not included) into the remote control. Turn on the remote control first, then turn on the RC truck. The remote and truck should automatically pair. If pairing fails, refer to the troubleshooting section.

Figure 4: The remote control unit, highlighting the steering trim (ST.TRIM) and throttle (CH2.TH) controls, along with the 70% throttle limited switch.

Instruccions de funcionament

Controls bàsics

• Throttle (CH2.TH): Pull the trigger towards you to accelerate forward. Push the trigger away from you to brake or reverse.
• Steering (CH1.ST): Rotate the steering wheel left or right to turn the vehicle.
• Trim de la direcció (ST.TRIM): Adjust this dial if the vehicle pulls to one side when the steering wheel is centered.
• Throttle Limited Switch: This switch allows you to limit the maximum throttle output to 70%, which is ideal for beginners or younger users. For full speed, ensure this switch is set to 100%.

Figure 5: The HYPER GO H16DR demonstrating its jumping capability, supported by oil-filled shocks and a reinforced chassis for durability.

Consells de conducció

• Start with the throttle limit switch engaged (70%) to get accustomed to the vehicle's handling.
• Practice smooth throttle and steering inputs for better control.
• The H16DR is designed for off-road terrain. Avoid driving on extremely rough surfaces that could damage components.
• The vehicle features IPX5 water resistance, allowing for operation in light splashes. Avoid submerging the vehicle.

Figure 6: The HYPER GO H16DR demonstrating its water resistance by driving through shallow water, highlighting its off-road capability.

Manteniment

Regular maintenance ensures optimal performance and longevity of your RC car.

Neteja general

• After each use, especially in dirty or dusty conditions, clean the vehicle with a soft brush or compressed air to remove debris.
• Netegeu el xassís i la carrosseria amb anuncisamp tela. Eviteu utilitzar productes químics aggressivs.
• Inspect the wheels and tires for embedded debris.

Conservació i emmagatzematge de la bateria

• Always disconnect the battery from the vehicle when not in use.
• Store LiPo batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• Do not overcharge or over-discharge LiPo batteries.
• Si una bateria sembla inflada o danyada, deixeu-ne d'utilitzar-la immediatament i llenceu-la correctament.

Inspecció de components

• Regularly check the oil-filled shock absorbers for leaks or damage.
• Inspect the drive shafts, gears, and bearings for wear or damage. The H16DR features alloy steel drive shafts and metal ball bearings for durability.
• Assegureu-vos que tots els cargols i elements de fixació estiguin ben ajustats.
• Check tire condition and ensure they are securely mounted. The tires are pre-mounted with soft sponge inserts for durability.

Figura 7: Intern view of the H16DR chassis, illustrating key components such as metal gears, differential assembly, and adjustable pull rods, which contribute to the vehicle's robust design.

Resolució de problemes

Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.

Especificacions

Figure 8: Key electronic components: the 35A ESC and 390 motor with heatsink (left), and the IPX5 water-resistant ESC (right).

Garantia i Suport

HYPER GO products are designed for durability and performance. For warranty inquiries or technical support, please contact the manufacturer directly.

• Fabricant: HYPER GO
• Venedor: HYPER GO (via Amazon)
• Consulteu la documentació de compra per conèixer els termes específics de la garantia i la informació de contacte.
• For common issues, please consult the troubleshooting section of this manual.

The manufacturer is committed to customer satisfaction and provides support for product-related concerns.