GODEER B09YTVGSJ8

GODEER Queen Size Platform Bed User Manual

Model: B09YTVGSJ8

Marca: GODEER

Introducció

Thank you for choosing the GODEER Queen Size Platform Bed. This bed frame features a modern design with an upholstered faux leather finish, a convenient hydraulic storage system, and an integrated LED light headboard. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new bed. Please read this manual thoroughly before assembly and use, and retain it for future reference.

Informació de seguretat

Si us plau, observeu les següents precaucions de seguretat per evitar lesions o danys al producte:

Contingut del paquet

Abans del muntatge, comproveu que tots els components que s'enumeren a continuació estiguin inclosos al paquet:

Instruccions de muntatge

Please follow these steps carefully for proper assembly. Two people are recommended for assembly.

Pas 1: Desempaquetar i identificar les peces

Carefully unpack all components and lay them out on a soft, clean surface. Refer to the parts list to identify each piece. The overall dimensions of the assembled bed are approximately 88.6"L x 65.7"W x 26.6"H.

Diagram showing the dimensions of the assembled bed frame, including length, width, and headboard height.

Image: Overall dimensions of the GODEER Queen Size Platform Bed.

Pas 2: Muntar el marc del llit

Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure. The faux leather upholstery provides a sleek black finish.

Step 3: Install the Center Support Beam

Secure the center support beam to the designated points on the headboard and footboard. This beam provides crucial support for the mattress and slats.

Step 4: Attach the Hydraulic Lift Mechanism

Mount the two hydraulic lift mechanisms to the bed frame according to the pre-drilled holes. Ensure they are oriented correctly and securely fastened. These mechanisms allow for easy lifting of the mattress platform.

Primer pla view of the hydraulic lift mechanism attached to the bed frame, showing the piston and pivot points.

Imatge: Detallada view of the hydraulic lift mechanism.

Step 5: Install the Wooden Slats

Insert the wooden slats into the plastic caps and attach them to the side rails and center support beam. Distribute the slats evenly across the frame. The slatted frame is designed for high load capacity, up to 500 LBS.

View of the wooden slats installed on the bed frame, showing the even spacing and plastic caps.

Image: Installation of wooden slats on the bed frame.

Step 6: Connect LED Lights

Connect the LED light strip cable from the headboard to the power adapter. Plug the adapter into a standard wall outlet. The LED lights offer 16 color options and 4 automatic changing modes.

Instruccions de funcionament

Funcionament del capçal amb llum LED

The LED lights are controlled by the included 24-button remote control. Ensure the power adapter is plugged in.

The bed frame with the LED light strip in the headboard illuminated in a blue color.

Image: Headboard with LED lights illuminated.

Primer pla view of the LED light strip embedded in the headboard, showing the light source.

Image: Close-up of the LED light strip.

Using the Hydraulic Storage System

The hydraulic storage system allows you to easily lift the mattress platform to access the large storage box underneath the bed. This creates extra space for your bedroom.

The bed frame with the mattress platform lifted by the hydraulic system, revealing the storage space underneath filled with bedding.

Image: Bed with hydraulic storage system open.

Manteniment

Proper care will extend the life and appearance of your bed frame:

Resolució de problemes

If you encounter any issues with your bed frame, refer to the following table for common problems and solutions:

ProblemaCausa possibleSolució
El marc del llit trontolla o grinyola.Maquinari solt.Comproveu i premeu tots els cargols i cargols.
Els llums LED no s'encenen.Power adapter unplugged; remote battery dead; loose connection.Ensure power adapter is securely plugged in. Replace remote battery. Check all cable connections.
Hydraulic lift difficult to open/close or does not stay open.Mattress too heavy/light; obstruction; hydraulic mechanism issue.Ensure mattress thickness is 6"-8". Check for obstructions. If issue persists, contact customer support.
Slats are falling out.Slats not properly seated in plastic caps; caps damaged.Ensure each slat is fully inserted into its plastic cap. Check caps for damage and replace if necessary.

Especificacions

CaracterísticaEspecificació
Tipus de producteEstructura de llit de plataforma
MidaReina
ColorNegre
MaterialFaux Leather Upholstery, Metal, Wood
Dimensions del producte (L x A x A)88.6" x 65.7" x 26.6"
Recomanació de pes màxim500 lliures
Gruix recomanat del matalàs6" - 8"
Característiques de la llum LED16 Colors, 4 Automatic Modes, Remote Control
Característiques especialsHydraulic Storage System, LED Light Headboard
ASINB09YTVGSJ8
UPC766640879245

Garantia i Suport

For warranty information or technical support, please contact GODEER customer service. Have your product model number (B09YTVGSJ8) and purchase date ready when contacting support. You can typically find contact information on the packaging or the retailer's weblloc on vau comprar el producte.

Documents relacionats - B09YTVGSJ8

Preview GODEER 748F Canopy Bed Frame Assembly Instructions
Comprehensive assembly instructions for the GODEER 748F canopy bed frame. This guide includes a detailed parts list, step-by-step assembly procedures with textual descriptions of diagrams, warranty information, and important notes for safe and correct installation.
Preview GODEER BF-035D-LXLWH White Twin over Twin Bunk Bed Assembly Instructions
Detailed assembly instructions for the GODEER BF-035D-LXLWH White Twin over Twin Bunk Bed, including parts list and step-by-step guidance for safe and proper setup.
Preview GODEER Black Heavy Duty Twin over Full Metal Bunk Bed Assembly Instructions
Assembly instructions for the GODEER Black Heavy Duty Twin over Full Metal Bunk Bed, including a list of parts, hardware, and step-by-step guidance.
Preview GODEER 748E Canopy Bed Assembly Instructions
Detailed assembly instructions for the GODEER 748E Canopy Bed, including parts list, step-by-step guidance, and warranty information. Ensure correct assembly for a sturdy and safe canopy bed.
Preview Instruccions de muntatge del marc de llit amb plataforma metàl·lica de mida completa WF290264
Aquest document proporciona instruccions de muntatge completes per al marc de llit amb plataforma metàl·lica de mida completa WF290264. Inclou una llista detallada de peces, una llista de ferreteria i guies visuals pas a pas per facilitar la construcció correcta.
Preview Assembly Instructions: Full Bed WF192974
Detailed assembly guide for the Full Bed model WF192974, including a comprehensive parts list, hardware list, and step-by-step instructions with textual descriptions of diagrams. Ensure correct assembly for optimal use and safety.