Pro-Ject E1 Phono Turntable Instruction Manual

Introducció

The Pro-Ject E1 Phono is a Plug & Play entry-level record player designed to deliver a great sound experience. This model features a built-in switchable phono stage and electronic speed switch for 33/45 RPM records, making it a versatile addition to any audio setup.

The E1 Phono is meticulously handmade in Europe, ensuring quality craftsmanship. Its design focuses on ease of use, with pre-adjusted tracking force and anti-skating settings from the factory, allowing users to enjoy their favorite records with minimal setup.

Les característiques clau inclouen:

• Disseny Plug & Play: Pre-adjusted tracking force and anti-skating for immediate use.
• Fono Pre integratampmés viu: Built-in switchable Moving Magnet phono stage, ideal for systems without an external phono preampmés viu.
• Electronic Speed Switch: Easily switch between 33 and 45 RPM.
• Construcció de qualitat: CNC-machined composite fiber plinth in high gloss black, high gloss white, or walnut finish, designed to eliminate hollow spaces.
• Optimized Tonearm: Lightweight, low-friction 8.6-inch aluminum tonearm, optimized for the included OM5e cartridge.
• Anti-Resonant Platter: New ABS Polymer main platter with purpose-designed ridges for an ideal, anti-resonant platform.
• Protective Dustcover: Elegant acrylic dustcover with adjustable hinges included.

Image: The Pro-Ject E1 Phono turntable, showcasing its elegant design within a home environment.

Què hi ha a la caixa

Upon unboxing your Pro-Ject E1 Phono turntable, you should find the following components:

• Pro-Ject E1 Phono Turntable Unit
• Cable de fono
• Funda antipols
• Cables RCA
• Font d'alimentació
• Estoreta de feltre
• Corretja de transmissió
• Contrapès
• OM5e Cartridge (pre-mounted)

Guia de configuració

Desempaquetatge i muntatge inicial

For a visual guide on unboxing and initial setup, please refer to the official video below:

Follow these steps to prepare your turntable:

1. Carefully remove the turntable from its packaging. Keep all packaging materials for future transport or service.
2. Col·loqueu el plat giratori sobre una superfície estable i anivellada.
3. Install the platter onto the spindle. Ensure it sits correctly.
4. Gently stretch the drive belt around the sub-platter and the motor pulley. Rotate the platter a few times manually to ensure the belt is seated properly.
5. Col·loqueu la catifa de feltre a sobre del plat.
6. Remove any tonearm twist ties or protective covers.

Imatge: Vista de dalt a baix view of the Pro-Ject E1 Phono turntable, highlighting the platter, tonearm, and controls.

Tonearm and Cartridge Configuration

The Pro-Ject E1 Phono is designed for 'Plug & Play' convenience. The tracking force and anti-skating are pre-adjusted at the factory for the included OM5e cartridge. This means you typically do not need to perform these adjustments manually.

Imatge: Una imatge detallada view of the tonearm and the Ortofon OM5e cartridge, ready for playback.

Dust Cover Attachment

Attach the acrylic dust cover by inserting its hinges into the designated slots at the rear of the turntable plinth. The dust cover helps protect your turntable from dust and debris when not in use.

Connexió al vostre sistema d'àudio

The E1 Phono features a built-in switchable phono preamplifier. This allows you to connect the turntable directly to an amplifier or powered speakers that do not have a dedicated phono input.

• Using the Built-in Phono Stage: Ensure the switch on the underside of the turntable is set to 'Phono' or 'Line' (depending on the specific model's labeling, typically 'Line' for built-in preamp active). Connect the RCA cables from the turntable's output to a standard 'Line In' (AUX, CD, Tuner, etc.) input on your amplifier o altaveus alimentats.
• Using an External Phono Preampmés viu: If you prefer to use an external phono preamplifier, set the switch on the underside of the turntable to 'Phono' (or 'Phono Out'). Connect the RCA cables from the turntable's output to the 'Phono In' input of your external phono preamplifier. Then, connect the output of your external phono preamplifier to a 'Line In' input on your amplifier o altaveus alimentats.

Image: The Pro-Ject E1 Phono turntable positioned next to a set of speakers, illustrating a typical audio setup.

Operating Your Turntable

Encès/Apagat

Locate the power switch, typically at the rear or side of the plinth. Flip the switch to the 'On' position to power on the turntable. Flip it to 'Off' to power down.

Reproducció d’un disc

1. Place a record on the platter, ensuring it is centered on the spindle.
2. Seleccioneu la velocitat de reproducció correcta (33 o 45 RPM) amb el selector electrònic de velocitat.
3. Aixequeu suaument el braç amb la palanca de cueing.
4. Col·loqueu el braç sobre el solc inicial desitjat del disc.
5. Slowly lower the cueing lever to gently drop the stylus onto the record. The record will begin to play.
6. To stop playback, lift the tonearm using the cueing lever and return it to the tonearm rest.

Image: A hand carefully positions the tonearm onto a vinyl record, demonstrating the start of playback.

Speed Selection (33/45 RPM)

The Pro-Ject E1 Phono features an electronic speed switch. To change between 33 and 45 RPM, simply press the designated speed button on the turntable plinth. The platter speed will adjust accordingly.

Manteniment

Regular maintenance will ensure the longevity and optimal performance of your turntable.

• Neteja de la coberta antipols: Use a soft, lint-free cloth and a mild, non-abrasive cleaner to wipe the dust cover. Avoid harsh chemicals that may scratch or damage the acrylic.
• Neteja del llapis: Periodically clean the stylus using a soft brush designed for stylus cleaning. Always brush from back to front.
• Cleaning Records: Use a record brush before each play to remove dust and static from your vinyl records. For deeper cleaning, use a specialized record cleaning solution and cloth.
• Neteja general: Wipe the plinth and other surfaces with a soft, dry cloth. Avoid using liquid cleaners directly on the turntable components.

Resolució de problemes

If you encounter any issues with your Pro-Ject E1 Phono turntable, refer to the following common troubleshooting tips:

• Sense so:
  • Ensure the turntable is powered on and connected correctly to your amplifier/altaveus.
  • Check the phono/line out switch on the underside of the turntable. If using the built-in preamp, it should be set to 'Line'. If using an external preamp, it should be set to 'Phono' and connected to the external preamp's input.
  • Verifiqueu que el vostre amplifier/speakers are turned on and set to the correct input source.
  • Check that the stylus is properly seated in the cartridge and not damaged.
• So distorsionat o salts:
  • Ensure records are clean and free of dust or debris.
  • Check the stylus for damage or excessive wear. Replace if necessary.
  • Verify the turntable is on a stable, level surface to prevent vibrations.
  • Although pre-adjusted, ensure the tonearm's tracking force and anti-skating are correct. Consult a specialist if you suspect these settings are off.
• Velocitat incorrecta:
  • Ensure the correct speed (33 or 45 RPM) is selected using the electronic speed switch.
  • Check that the drive belt is correctly installed and not stretched or damaged.

If these steps do not resolve your issue, please contact Pro-Ject customer support or your retailer for further assistance.

Especificacions tècniques

Garantia i Suport

Your Pro-Ject E1 Phono turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact your authorized Pro-Ject retailer or visit the official Pro-Ject Audio Systems weblloc web per obtenir informació de contacte del servei d'atenció al client.