Rough Country 11016

Rough Country HD Tie Rod Kit Instruction Manual

Model: 11016 | For 2011-2024 Chevy/GMC 2500HD/3500HD

Introducció

This manual provides essential information for the installation, operation, and maintenance of your Rough Country HD Tie Rod Kit (Model 11016). This kit is designed as a heavy-duty replacement for the original equipment (OE) tie rod assemblies in 2011-2024 Chevy/GMC 2500HD/3500HD vehicles, offering enhanced durability and performance.

Informació de seguretat

WARNING: Improper installation or modification of vehicle components can lead to serious injury or death. Always exercise caution and follow all safety procedures.

Rough Country recommends that a certified technician install lift systems and related components. Knowledge of Rough Country instructions, suspension procedures, and post-installation checks are required. If a system is installed without adequate knowledge and expertise, it may impact the integrity and operating safety of the vehicle. Always wear appropriate personal protective equipment (PPE) during installation.

Característiques del producte

  • Heavy-duty replacement tie rod assemblies.
  • Bend-resistant construction for increased durability.
  • Replaces both inner and outer OE tie rod ends.
  • Made with forged steel, including an adjustable shaft and steel ball-joint housing.
  • Sold as a pair.

Contingut del paquet

The Rough Country HD Tie Rod Kit (Model 11016) includes:

  • 2 x HD Tie Rod Assemblies (Inner and Outer Tie Rod Ends combined)
  • Necessary hardware for installation (e.g., nuts, cotter pins, washers)
Rough Country HD Tie Rod Kit components

Figure 1: Rough Country HD Tie Rod Kit components, showing the two heavy-duty tie rod assemblies.

Rough Country HD Tie Rod Kit compared to stock tie rod

Figure 2: Comparison of the Rough Country HD Tie Rod Kit (RC) with a stock tie rod, highlighting the robust construction of the RC product.

Configuració i instal·lació

The Rough Country HD Tie Rod Kit features a no-cutting, bolt-on installation process. However, due to the critical nature of steering components, professional installation by a certified technician is strongly recommended.

Passos d'instal·lació (General)view):

  1. Aixecar i subjectar el vehicle amb seguretat.
  2. Remove the existing tie rod assemblies.
  3. Install the new Rough Country HD Tie Rod Kit, ensuring all hardware is torqued to manufacturer specifications.
  4. Baixeu el vehicle.
  5. IMPORTANT: A professional vehicle alignment is required immediately after installation to ensure proper steering geometry and vehicle safety.
Rough Country HD Tie Rod Kit installed on vehicle

Figure 3: Rough Country HD Tie Rod Kit installed on a vehicle, demonstrating its integration into the steering system.

For detailed, step-by-step instructions, please refer to the specific installation guide provided with your product or consult the Rough Country official weblloc.

En funcionament

Once properly installed and aligned, the Rough Country HD Tie Rod Kit will provide improved steering response and enhanced durability, especially beneficial for off-road use or when towing heavy loads. The robust design helps maintain steering stability under demanding conditions.

Manteniment

Regularly inspect the tie rod assemblies for any signs of wear, damage, or loose connections. Check the boots for tears or cracks, which could allow contaminants to enter the ball joints. Address any issues promptly to maintain optimal performance and safety. Consult a qualified technician for periodic inspections and maintenance.

Resolució de problemes

If you experience any unusual steering behavior, such as excessive play, noise, or difficulty in steering, after installing the HD Tie Rod Kit, it is crucial to have the vehicle inspected by a qualified mechanic immediately. Potential issues could include improper installation, incorrect alignment, or component damage. Do not operate the vehicle if you suspect a steering problem.

Especificacions

AtributDetall
MarcaPaís Aspre
Número de model11016
Dimensions del producte45.09 x 15.88 x 8.26 cm
Pes de l'article7.26 kg
PosicióDavant
ConstruccióAcer forjat
Característiques especialsRequires vehicle alignment after installation
Compatibilitat2011-2024 Chevy/GMC 2500HD/3500HD

Garantia

The Rough Country HD Forged Tie Rod Kit is backed by Rough Country's Limited Lifetime Replacement Warranty. For specific terms, conditions, and to register your product, please visit the official Rough Country weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.

Suport

For further assistance, technical support, or inquiries regarding your Rough Country HD Tie Rod Kit, please contact Rough Country customer service directly. Contact information can typically be found on the Rough Country official weblloc.

Documents relacionats - 11016

Preview Guia d'instal·lació dels braços de control superiors d'alumini forjat de Rough Country 921820080 Nissan Titan 04-23
Detailed installation instructions and product information for Rough Country's Forged Aluminum Upper Control Arms (Part #921820080) for the 2004-2023 Nissan Titan and Titan XD. Includes warnings, kit contents, tools needed, step-by-step installation, and post-installation checks.
Preview Rough Country 07-21 Toyota Tundra Crew Cab Overland Steps Installation Guide
Detailed installation instructions for Rough Country Overland Steps (model 921400500) for the 07-21 Toyota Tundra Crew Cab. Includes kit contents, tools needed, hardware list, torque specifications, and step-by-step guidance.
Preview Rough Country Retractable Power Running Boards Installation Guide for Chevy/GMC 2007-18
Detailed installation instructions for Rough Country Retractable Power Running Boards for Chevrolet/GMC 1500/2500/3500 gasoline models from 2007-2018. Includes kit contents, tools needed, hardware, and step-by-step assembly.
Preview Rough Country 870BAG3 3-Inch Leveling Kit Installation Guide for Toyota Tundra (2007-2021)
Step-by-step installation instructions and product information for the Rough Country 870BAG3 3-inch leveling kit designed for 2007-2021 Toyota Tundra vehicles. Includes kit contents, tools required, torque specifications, and post-installation checks.
Preview Guia d'instal·lació del kit d'elevació de seient Rough Country 921730000 Toyota Tacoma
Instruccions d'instal·lació detallades i especificacions de parell d'apriete per al kit d'elevadors de seient Rough Country 921730000 per a models Toyota Tacoma 2016-2022. Apreneu a instal·lar elevadors de seient per a una millor comoditat i visibilitat.
Preview Rough Country Can-Am Defender HD 10 Rear Molle Panel Installation Guide
Installation instructions and hardware details for the Rough Country Rear Molle Panel designed for Can-Am Defender HD 10 (2016-2022) models. Includes kit contents, tools needed, hardware list, and torque specifications.