hygger 26W

hygger 26W Clip-On Full Spectrum Aquarium LED Light User Manual

Model: 26W (for 31-37 inch tanks)

1. Instruccions de seguretat

  • Desconnecteu sempre l'alimentació abans de realitzar qualsevol manteniment o instal·lació.
  • Ensure hands are dry when handling the power adapter and plug.
  • Do not immerse the controller in water. It is not waterproof.
  • Ensure the light is securely mounted to prevent accidental falls into the aquarium.
  • Mantenir fora de l'abast dels nens.
  • Només per a ús interior.

2. Contingut del paquet

  • hygger 26W LED Light Fixture
  • Adjustable Clip-On Brackets (2 pieces)
  • In-line Controller with Power Adapter
  • Manual d'instruccions

3. Configuració i instal·lació

The hygger Clip-On Full Spectrum Aquarium LED Light is designed for easy installation on various tank types. Follow these steps for proper setup:

  1. Attach Brackets to Light Fixture: The light fixture features a groove on its underside. Slide the two clip-on brackets into this groove. The brackets are adjustable, allowing you to position them as needed along the length of the light.
  2. Adjust Bracket Position: The brackets can be adjusted to extend the light further or closer to the tank. Loosen the screws on the brackets, slide them to your desired position, and then tighten the screws to secure.
  3. Mount Light to Aquarium: Place the assembled light fixture onto the rim of your aquarium. The clip-on brackets are designed to fit tank glass less than 0.74 inches (approximately 1.9 cm) thick. Tighten the plastic screws on the brackets to firmly secure the light to the tank rim.
  4. Connectar l'alimentació: Connect the in-line controller to the light fixture, and then plug the power adapter into a standard electrical outlet.
Hygger Clip-On Full Spectrum Aquarium LED Light installed on a fish tank.
Figure 3.1: Hygger Clip-On Full Spectrum Aquarium LED Light installed on a fish tank. The light is positioned over the water surface, showcasing its sleek design and how it integrates with the aquarium setup.
Close-up of the Hygger LED light showing the clip-on bracket attachment.
Figura 3.2: Primer pla view of the clip-on bracket mechanism, demonstrating how it secures the light fixture to the aquarium glass. The adjustable screws allow for a snug fit on tank rims up to 0.74 inches thick.
Image showing the separable adapter for the Hygger LED light.
Figure 3.3: The separable adapter design, highlighting the ease of replacing the adapter without needing to replace the entire light fixture, minimizing waste.

Vídeo d'instal·lació

Video 3.1: This video demonstrates the unboxing, assembly, and various lighting modes and timer functions of the hygger Clip On Full Spectrum Aquarium LED Light. It shows how to connect the light fixture, clip-on bracket, and light neck, and how to adjust the light's position on the aquarium. The video also highlights the different color options and brightness levels available through the controller, as well as the 24/7 timer feature for simulating sunrise and sunset.

4. Instruccions de funcionament

The hygger LED light offers multiple operating modes and customizable settings via its in-line controller.

Diagram of the Hygger LED light controller with buttons for timer, mode, and brightness.
Figure 4.1: The in-line controller for the Hygger LED light, illustrating the buttons for setting daylight timer, moonlight timer, power/mode selection, and brightness adjustment.

4.1. Modes de funcionament

La llum presenta quatre modes de funcionament diferents:

  1. Daylight Only Mode: Set the duration for daylight lighting (6H/10H/12H). This mode simulates sunrise and sunset with a gradient orange to full spectrum white light transition.
  2. Moonlight Only Mode: Set the duration (3H/5H/12H) and choose from 6 brightness levels (10%-100%) and 7 colors (red, orange, yellow, green, cyan, blue, purple).
  3. Daylight + Moonlight Mode: Combines both daylight and moonlight cycles for a complete 24-hour simulation.
  4. Mode manual: Allows direct selection of 9 colors and 6 brightness levels without a set timer.

4.2. Configuració del temporitzador

Use the dedicated timer buttons on the controller to set the desired lighting duration.

  • Premeu el botó DAY-L timer button to select daylight lighting times: 6 hours, 10 hours, or 12 hours.
  • Premeu el botó MOON-L timer button to select moonlight lighting times: 3 hours, 5 hours, or 12 hours.
Daylight timer setting for 6 hours.
Figure 4.2: Daylight timer set to 6 hours, illustrating the light intensity profile over the duration.
Daylight timer setting for 10 hours.
Figure 4.3: Daylight timer set to 10 hours, showing the light intensity profile including sunrise and sunset simulation.
Daylight timer setting for 12 hours.
Figure 4.4: Daylight timer set to 12 hours, detailing the light intensity changes throughout the cycle.
Moonlight timer setting for 3 hours.
Figure 4.5: Moonlight timer set to 3 hours, illustrating the light intensity profile for nighttime illumination.

4.3. Brightness and Color Adjustment

In Manual Mode or Moonlight Only Mode, you can adjust brightness and select colors:

  • Premeu el botó ON/M button to cycle through 9 available colors (red, orange, yellow, green, cyan, blue, purple, gradient cycle, and full spectrum).
  • Utilitza el Fletxes amunt/avall to select from 6 brightness levels: 10%, 25%, 35%, 50%, 75%, and 100%.
Hygger LED light displaying various color options and brightness levels.
Figure 4.6: The light showcasing its 8 distinct color options and 6 adjustable brightness levels, providing versatile lighting for your aquarium.

5. Manteniment

The hygger LED light is designed for easy maintenance and long-term use.

  • Neteja: Regularly wipe the light fixture with a soft, dry cloth to remove dust and water spots. Ensure the light is unplugged before cleaning.
  • Substitució de l'adaptador: The separable adapter allows for easy replacement if damaged, preventing the need to replace the entire light fixture.
  • Vida útil LED: The high-quality 2835 + 5050 model lamp beads have a long service life of at least 50,000 hours.

6. Solució De Problemes

If you encounter issues with your hygger LED light, refer to the following common solutions:

  • La llum no s'encén:
    • Check if the power adapter is securely plugged into both the light and the electrical outlet.
    • Comproveu que la presa de corrent funcioni provant-la amb un altre dispositiu.
    • Verify that the in-line controller is properly connected and not damaged.
  • Mal funcionament del temporitzador:
    • Ensure the timer is set correctly according to the operating instructions.
    • If the light flashes or beeps unexpectedly, try unplugging and replugging the unit to reset the timer.
  • Brillantor/Color inconsistent:
    • Ensure the light is not in a timed mode that automatically adjusts brightness or color. Switch to Manual Mode to test direct control.
    • Check for any loose connections in the power cord or controller.
  • Problemes de muntatge:
    • Ensure your tank rim thickness is less than 0.74 inches for proper fit of the clip-on brackets.
    • Tighten all screws on the brackets firmly to prevent slipping.

7. Especificacions

CaracterísticaDetall
Poder26W
Quantitat de LED180 PCS (White: 110, Blue: 18, Red: 10, Green: 6, RGB: 36)
CRI (índex de reproducció del color)84.3
Application (Tank Length)31 polzades ~ 37 polzades
Longitud del cable d'alimentació4.9 peus + 2.3 peus
Entrada VoltageAC100-240V
Vol. De sortidatageDC20V
Kelvin (Color Temperature)White 6500K, Blue 455nm, Red 620nm, Green 560nm
Llums3579 lm
MaterialAlumini
Tipus de muntatgeClip (for tank thickness less than 0.74 in)
Dimensions del producte3.1 x 28.5 x 2.6 polzades

8. Garantia i Suport

This hygger product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact hygger customer service through the retailer where the product was purchased or visit the official hygger weblloc.

For additional resources and product information, please visit the hygger Store on Amazon.

Documents relacionats - 26W

Preview Hygger HG018 24/7 Aquarium Clip-On Light User Manual
Comprehensive user manual for the Hygger HG018 clip-on aquarium light, detailing features, specifications, installation, operation, and safety precautions for planted and freshwater aquariums.
Preview Hygger HG-957 Aquarium Extendable LED Light User Manual
Detailed user manual for the Hygger HG-957 Aquarium Extendable LED Light, covering features, product parameters, safety instructions, operation modes (Standard, Manual, DIY), installation, and troubleshooting. Learn how to set up and program your aquarium lighting for optimal plant growth and aquarium aesthetics.
Preview Manual d'usuari de la llum d'aquari LED Hygger HG-999
User manual for the Hygger HG-999 24/7 Auto On & Off LED Aquarium Light, detailing product features, technical parameters, important safety instructions, setup procedures for Standard, Day, Night, and DIY modes, installation guidelines, troubleshooting tips, package contents, and disposal information.
Preview Hygger HG-990 Aquarium Clip-On Light User Manual
User manual for the Hygger HG-990 Planted + 24/7 Aquarium Clip-On Light, detailing product features, parameters, application methods, safety precautions, warranty, and disposal.
Preview Hygger HG076 Llum LED d'aquari d'espectre complet amb temporitzador Manual d'usuari
User manual for the hygger HG076 Full Spectrum Aquarium LED Light with Timer. Features include adjustable brightness, built-in timer, 24/7 lighting mode, and clip-on bracket for freshwater setups. Includes product parameters, setup instructions, and safety warnings.
Preview Manual d'usuari de l'Hygger HG211 Aqua Puredigest Pro - Tractament d'aigua d'aquari
User manual for Hygger HG211 Aqua Puredigest Pro, a microbial formula for aquarium ecosystems. Provides usage guidelines, application scenarios, precautions, and contact information for maintaining clean and stable aquarium water conditions.