1. Introducció
Thank you for choosing the Brilliant Sergioro Outdoor Wall Light with Motion Detector. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before installation and retain it for future reference.
The Sergioro wall light is designed for outdoor use, featuring a robust IP44 protection rating against splashing water. Its integrated motion detector enhances security and convenience by automatically illuminating your entrance, patio, or exterior walls when movement is detected.
Figure 1: Brilliant Sergioro Outdoor Wall Light in an outdoor setting.
2. Informació de seguretat
WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Desconnecteu sempre l'alimentació a la caixa de fusibles principal o a l'interruptor automàtic abans de la instal·lació, el manteniment o la substitució de la bombeta.
- Ensure the mounting surface is suitable to support the weight of the fixture.
- No connecteu el dispositiu a un interruptor regulador d'intensitat tret que s'indiqui explícitament que és compatible.
- This product is rated IP44, providing protection against splashing water. It is not suitable for submersion or direct high-pressure water jets.
- Feu servir només bombetes E27 amb una potència màximatage de 20 W. Es recomanen bombetes LED per a l'eficiència energètica.
- Mantenir els materials d'embalatge fora de l'abast dels nens.
3. Contingut del paquet
Please check that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact your retailer.
- 1x Brilliant Sergioro Outdoor Wall Light fixture
- 1x Mounting hardware kit (screws, wall plugs)
- 1x Manual d'usuari (aquest document)
Nota: Les bombetes E27 no estan incloses i s'han de comprar per separat.
4. Configuració i instal·lació
Follow these steps carefully for proper installation. If you are unsure about any part of the installation process, consult a qualified electrician.
4.1 Eines necessàries (no incloses)
- Tornavís (cap Phillips)
- Drill and drill bits (appropriate for wall material)
- Llapis
- Pelacables
- Insulation tape (optional)
4.2 Ubicació de muntatge
- Choose a suitable outdoor wall location, such as an entrance, patio door, or exterior wall.
- Ensure the mounting height for the motion detector is approximately 2.20 meters for optimal detection range.
- Avoid mounting near heat sources, reflective surfaces, or areas with constant movement (e.g., busy street) that could trigger the sensor unnecessarily.
4.3 Passos d'instal·lació
- Desconnecteu l'alimentació: Abans de començar, assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
- Preparació de l'aparell: Carefully unpack the light fixture.
- Marca els punts de perforació: Hold the mounting bracket (usually located at the back of the fixture) against the wall at your desired installation height. Use a pencil to mark the drilling points.
- Forats: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
- Connecteu el cablejat:
- Carefully strip the insulation from the electrical supply wires.
- Connect the live (L), neutral (N), and earth (E) wires from your household wiring to the corresponding terminals on the light fixture. Ensure connections are secure.
- En cas de dubte, consulteu un electricista qualificat.
- Fixació de muntatge: Secure the light fixture to the wall using the provided screws, ensuring it is firmly attached.
- Instal·leu les bombetes: Insert two E27 light bulbs (not included) into the sockets. Ensure they are securely screwed in. The fixture is compatible with LED bulbs up to 20W.
Figure 2: Detail of the light fixture showing bulb sockets and motion sensor.
5. Instruccions de funcionament
After successful installation and power restoration, the Sergioro wall light will be ready for operation. The integrated motion detector allows for automatic illumination.
5.1 Motion Detector Settings
The motion detector has adjustable settings for sensitivity (detection range) and illumination time. These controls are typically located on the sensor unit itself.
Figure 3: Close-up of the motion detector with adjustment controls.
- Angle de detecció: The sensor has a detection angle of 110°. Position the fixture to cover the desired area.
- Interval de detecció: The motion detector can detect movement up to 7 meters. Adjust the sensitivity dial (if present) to fine-tune this range.
- Temps d'il·luminació: The light duration after motion detection is adjustable from 5 seconds to 5 minutes. Use the 'TIME' dial on the sensor to set your preferred duration.
- Lux/Daylight Sensor: Some motion detectors include a 'LUX' or 'DAYLIGHT' dial. This setting determines the ambient light level at which the sensor becomes active. For example, setting it to a low LUX value means the light will only activate in very dark conditions, while a high LUX value will allow it to activate in brighter conditions (e.g., dusk).
Experiment with the settings to find the optimal configuration for your specific needs and environment.
6. Manteniment
Regular maintenance will ensure the longevity and optimal performance of your Brilliant Sergioro Outdoor Wall Light.
- Neteja:
- Assegureu-vos que l'alimentació estigui apagada abans de netejar.
- Netegeu l'aparell amb un drap suauamp drap. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat o els components elèctrics.
- Periodically clean the motion sensor lens to ensure unobstructed detection.
- Substitució de bombetes:
- Desconnecteu sempre l'alimentació abans de substituir les bombetes.
- Allow old bulbs to cool completely before handling.
- Unscrew the old E27 bulb and screw in a new one. Ensure the new bulb is E27 type and does not exceed 20W.
- Inspecció: Reviseu periòdicament l'aparell per detectar qualsevol signe de danys, connexions soltes o desgast. Si trobeu algun problema, desconnecteu l'alimentació i consulteu un electricista qualificat.
7. Solució De Problemes
If you encounter issues with your wall light, refer to the following table for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. |
|
|
| La llum es manté encesa contínuament. |
|
|
| La llum parpelleja o parpelleja. |
|
|
| El sensor de moviment no detecta. |
|
|
If the problem persists after trying these solutions, please contact Brilliant customer support or a qualified electrician.
8. Especificacions tècniques
| Marca: | Brillant |
| Número de model: | 96474 |
| Dimensions del producte (L x A x A): | 12.5 x 9 x 33.2 cm |
| Pes de l'article: | 1.26 quilos |
| Material: | Metal, Aluminium, Plastic |
| Color: | Negre |
| Tipus d'acabat: | Mat |
| Nombre de bombetes: | 2 (no inclòs) |
| Tipus de tap: | E27 |
| Max Wattage per bombeta: | 20W (LED compatible) |
| Característica especial: | Detector de moviment |
| Motion Detector Angle: | 110° |
| Motion Detector Range: | Fins a 7 metres |
| Adjustable Light Time: | De 5 segons a 5 minuts |
| Classificació IP: | IP44 (Protecció contra esquitxades d'aigua) |
| Font d'alimentació: | Elèctric amb cable |
| Tipus d'instal·lació: | Wall Mount / Surface Mount |
| Ús: | Outdoor (House entrance, patio door, exterior wall) |
9. Garantia i Suport
Brilliant products are manufactured to high-quality standards. For information regarding the warranty period and terms for your Sergioro Outdoor Wall Light, please refer to the warranty card included with your purchase or visit the official Brilliant weblloc.
If you experience any issues or require technical assistance, please contact Brilliant customer support. Have your model number (96474) and proof of purchase ready when contacting support.
Per obtenir més ajuda, podeu visitar el fabricant weblloc: www.brilliant.de (This is a placeholder, actual website might vary based on region).
