1. Informació important de seguretat
Please read this manual thoroughly before installation and operation. Keep this manual in a safe place for future reference.
- This device is designed to detect both smoke and carbon monoxide.
- Installation should be performed by a qualified electrician if you are not familiar with electrical wiring.
- Do not paint the device. Paint can clog the openings and interfere with sensor operation.
- Proveu l'alarma setmanalment per assegurar-vos que funciona correctament.
- Replace the 9V backup battery annually, or when the low battery warning sounds.
2. Producte acabatview
The X-Sense XP04 is a hardwired combination smoke and carbon monoxide detector designed for comprehensive home safety. It features advanced photoelectric smoke and electrochemical CO sensors for accurate detection.
This detector is AC powered and includes a replaceable 9V battery backup, ensuring continuous monitoring even during power outages. It can be interconnected with up to 18 compatible X-Sense hardwired alarms, providing full coverage throughout your home.
Producte acabatview Vídeo
Aquest vídeo ofereix una visió generalview of the X-Sense XP04 Hardwired Combination Detector, demonstrating its features and components.
3. Configuració i instal·lació
The X-Sense XP04 detector is designed for easy installation. All necessary mounting hardware is included.
Passos d'instal·lació:
- Prepareu la ubicació de muntatge: Ensure the power is off at the circuit breaker before beginning installation. Select a location in accordance with local codes and the provided guidelines.
- Instal·leu el suport de muntatge: Secure the mounting bracket to the ceiling or wall using the provided screws and anchor plugs.
- Connecteu el cablejat: Connect the AC hardwired cables (black, white, red) to your household wiring. The red wire is for interconnection with other compatible alarms.
- Install Battery Backup: Insert the 9V backup battery into the battery compartment.
- Connecteu el detector: Alineeu el detector amb el suport de muntatge i gireu-lo en sentit horari fins que quedi ben encaixat.
- Restaura l'alimentació: Turn on the power at the circuit breaker. The detector will perform a self-test.
Interconnection for Full Coverage
This detector supports interconnection with up to 18 X-Sense 2-in-1 hardwired alarms. When one interconnected alarm is triggered, all connected alarms will sound simultaneously, providing early warning throughout your home.
4. Instruccions de funcionament
Estat de l'indicador LED:
- LED verd: Indicates normal operation and AC power.
- LED groc: Indicates a fault or low battery condition.
- LED vermell: Indicates an alarm (smoke or carbon monoxide detected).
Prova de l'alarma:
Press and hold the 'Test/Silence' button located on the center of the detector. The alarm will sound, and the LED indicator will flash. Release the button to stop the test. Test the alarm weekly.
Silenciar l'alarma:
In case of a non-emergency alarm (e.g., cooking fumes), press the 'Test/Silence' button to temporarily silence the alarm. The alarm will automatically reset after a few minutes if the air clears. If the hazard persists, the alarm will reactivate.
5. Manteniment
Substitució de la bateria:
The 9V backup battery should be replaced annually. When the battery is low, the detector will chirp and the yellow LED will flash. To replace the battery:
- Gireu el detector en sentit antihorari per treure'l del suport de muntatge.
- Obriu el compartiment de la bateria.
- Remove the old 9V battery and insert a new one, ensuring correct polarity.
- Close the battery compartment and reattach the detector to the mounting bracket by twisting clockwise.
- Proveu l'alarma després de substituir la bateria.
Neteja:
Clean your detector at least once a month to remove dust and debris. Use a soft brush or a vacuum cleaner with a soft brush attachment to clean the vents and cover. Do not use water, cleaners, or solvents.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Alarm chirps periodically (Yellow LED flashes) | Bateria baixa | Replace the 9V backup battery. |
| L'alarma sona sense fum/CO aparent | Dust, high humidity, cooking fumes, or chemical vapors | Clean the detector, ventilate the area, or relocate if false alarms persist due to environmental factors. |
| L'alarma no sona durant la prova | No power, faulty battery, or device malfunction | Check AC power, replace battery, or contact customer support if issues persist. |
| Red LED flashes, but no alarm sound | Faulty speaker or internal malfunction | Contacteu amb l'assistència al client per obtenir assistència. |
7. Especificacions
- Marca: X-Sense
- Model: XP04
- Font d'alimentació: AC (Hardwired) with 9V Battery Backup
- Dimensions del producte: 5.5 "P x 5.5" W x 1.5" H
- Pes de l'article: 4.58 lliures (aprox. 2.08 kg)
- Volum de l'alarma: 85 dB a 10 peus
- Tipus de sensor: Fotoelèctric (fum), electroquímic (monòxid de carboni)
- Material: Policarbonat
- Interconnexió: Up to 18 compatible X-Sense hardwired units
- Vida útil: Fins a 10 anys
- Components inclosos: 1 × User Manual, 2 × Screws and Anchor Plugs, 1 × 9 V Backup Battery, 1 × AC Hardwired Cable, 1 × Smoke and Carbon Monoxide Alarm XP04 (per unit in pack)
8. Garantia i Suport
X-Sense provides the following support for your XP04 detector:
- Garantia de devolució de diners: 60 dies
- Garantia de qualitat: 5 any
- Suport tècnic: Tota la vida
For technical assistance, warranty claims, or further information, please visit the official X-Sense weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
