Arducam 12MP IMX477 HQ Camera for Raspberry Pi User Manual

1. Introducció

This manual provides detailed instructions for the Arducam 12MP IMX477 HQ Camera module (Model B0271). This high-quality camera is designed for use with various Raspberry Pi models, offering superior image resolution and sensitivity. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

Image 1.1: Arducam 12MP IMX477 HQ Camera module with its flexible ribbon cable.

2. Producte acabatview

The Arducam 12MP IMX477 HQ Camera features a 1/2.3" 12 Megapixel IMX477 sensor, capable of capturing sharp images with a maximum still resolution of 4056 x 3040 pixels. Its compact size (25x24mm) and mounting holes are consistent with the Raspberry Pi Camera Module V2, but it offers enhanced resolution and improved low-light performance due to a larger pixel area. The camera includes an interchangeable M12 lens with a 75°(H) Field of View (FOV) and low distortion, suitable for capturing Ultra HD images.

Imatge 2.1: acabatview of the Arducam Mini Raspberry Pi HQ Camera, highlighting its IMX477 CMOS sensor, 12MP resolution (4056x3040), and 75°(H) M12 lens.

3. Què hi ha a la caixa

The package for your Arducam 12MP IMX477 HQ Camera includes the following components:

• 1 x Arducam 12MP IMX477 HQ Camera Module with M12 Lens
• 1 x 150mm/5.9inch 15pin to 22pin FPC cable
• 1 x 80mm/3.1inch 22pin camera cable

Image 3.1: Contents of the Arducam HQ Camera package, showing the camera module and included FPC cables.

4. Especificacions

5. Instruccions de configuració

This section guides you through connecting and configuring your Arducam 12MP IMX477 HQ Camera with your Raspberry Pi.

5.1 Connexió de maquinari

1. Power Off Raspberry Pi: Ensure your Raspberry Pi is completely powered off and disconnected from its power source before proceeding.
2. Locate Camera Port: Identify the CSI (Camera Serial Interface) port on your Raspberry Pi board. This is typically a long, narrow connector.
3. Connecteu el cable de cinta: Gently lift the plastic clip on the CSI connector. Insert the flexible ribbon cable from the camera module into the connector, ensuring the silver contacts on the cable face the silver contacts in the connector. Push the plastic clip back down to secure the cable.
4. Secure Camera Module: Position the camera module as desired, ensuring the ribbon cable is not bent sharply or under tension.

Image 5.1: Arducam HQ Camera module properly connected to a Raspberry Pi.

5.2 Software Configuration (Raspberry Pi OS Bullseye and later)

The Arducam IMX477 camera module supports the latest Raspberry Pi OS Bullseye (released Jan 28th, 2022) and libcamera applications. It is not compatible with previous Pi OS (Legacy) versions.

1. Edita config.txt: Obriu el config.txt file for editing. You can do this via the terminal:

   sudo nano /boot/config.txt

2. Add Camera Overlay: Afegiu la següent línia a la config.txt file:

   dtoverlay=imx477

3. Disable Automatic Camera Detection (Bullseye users): To override automatic camera detection, Bullseye users must also delete or change the camera_auto_detect entry to 0. Find the line:

   camera_auto_detect=1

   And change it to:

   camera_auto_detect=0

4. Enable Glamor Acceleration (for Pi Zero-3 Bullseye users): If you are using a Raspberry Pi Zero, Pi 1, Pi 2, or Pi 3 with Bullseye OS, you may need to enable Glamor acceleration for optimal performance.

   sudo raspi-config

   Navega a Opcions avançades → Glamor → Habilitat.
5. Desa i reinicia: Save the changes to config.txt (Ctrl+O, then Enter, then Ctrl+X in nano) and reboot your Raspberry Pi:

   sudo reboot

6. Instruccions de funcionament

After successful setup, you can use the libcamera tools to capture images and videos with your Arducam HQ Camera.

6.1 Basic Image Capture

To capture a still image, use the libcamera-still comandament:

libcamera-still -o image.jpg

This command will capture an image and save it as image.jpg in your current directory.

6.2 Gravació de vídeo bàsica

To record a video, use the libcamera-vid command. For example, to record a 10-second video:

libcamera-vid -t 10000 -o video.h264

This command records video for 10 seconds (10000 milliseconds) and saves it as video.h264.

6.3 Further libcamera Ús

El libcamera suite offers many options for resolution, frame rate, exposure, white balance, and more. For advanced usage and a full list of commands and parameters, refer to the official Raspberry Pi documentation for libcamera eines.

• libcamera-still --help: Displays options for still image capture.
• libcamera-vid --help: Displays options for video recording.
• libcamera-raw --help: Displays options for raw image capture.
• libcamera-hello --help: Displays options for a preview finestra.

7. Manteniment

Proper maintenance ensures the longevity and optimal performance of your Arducam HQ Camera.

• Neteja de lents: Use a soft, lint-free microfiber cloth specifically designed for optics to clean the lens. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the lens). Avoid abrasive materials or harsh chemicals.
• Eliminació de pols: Use a blower brush or compressed air (designed for electronics) to remove dust from the sensor and board. Do not touch the sensor directly.
• Manipulació: Always handle the camera module by its edges to avoid touching the lens or the sensitive electronic components on the board.
• Emmagatzematge: When not in use, store the camera in a clean, dry, and anti-static environment, preferably in its original packaging or a protective case.
• Condicions ambientals: Avoid exposing the camera to extreme temperatures, high humidity, or direct sunlight for extended periods.

Imatge 7.1: Part superior view of the Arducam HQ Camera module, showing the lens and board components.

8. Solució De Problemes

If you encounter issues with your Arducam HQ Camera, refer to the following common problems and solutions.

8.1 Camera Not Detected

• Comproveu la connexió del cable: Ensure the ribbon cable is securely inserted into both the camera module and the Raspberry Pi's CSI port, with the silver contacts facing correctly. The plastic clip on the CSI connector should be fully closed.
• Verify Software Configuration: Double-check that you have correctly added dtoverlay=imx477 a /boot/config.txt i posat camera_auto_detect=0 (for Bullseye). Reboot the Raspberry Pi after making changes.
• Compatibilitat del sistema operatiu: Confirm you are running Raspberry Pi OS Bullseye or a later version. This camera is not compatible with older (Legacy) OS versions.
• Font d'alimentació: Ensure your Raspberry Pi has an adequate power supply. Insufficient power can sometimes lead to peripheral detection issues.

8.2 Poor Image Quality / Focus Issues

• Ajustar el focus: The M12 lens is interchangeable and may require manual focusing. Gently rotate the lens barrel to achieve sharp focus. Use a test pattern or a known object at a specific distance to aid focusing.
• Neteja la lent: Ensure the lens surface is clean and free from dust, smudges, or fingerprints. Refer to the Maintenance section for cleaning instructions.
• Condicions d'il·luminació: While the IMX477 has improved low-light performance, extremely dark environments will still result in noisy images. Ensure adequate lighting for best results.
• Configuració del programari: Experimenta amb libcamera parameters such as exposure, gain, and white balance to optimize image quality for your specific environment.

Image 8.1: Arducam HQ Camera module on a test chart, useful for checking focus and image quality.

8.3 Performance Issues (Lag, Low Frame Rate)

• Glamor Acceleration: For Pi Zero-3 users, ensure Glamor acceleration is enabled in raspi-config as described in the Setup section.
• Raspberry Pi Model: Older Raspberry Pi models (e.g., Pi Zero, Pi 1, Pi 2) may have limited processing power compared to newer models (Pi 4, Pi 5), which can affect frame rates at higher resolutions.
• Software Load: Close unnecessary applications running on your Raspberry Pi to free up system resources.
• Resolution and Frame Rate Settings: Reduce the capture resolution or frame rate in your libcamera commands if you are experiencing lag.

9. Assistència i garantia

For technical support, product inquiries, or warranty information, please contact Arducam directly through their official website or customer service channels. Refer to your purchase documentation for specific warranty terms and conditions.

Arducam Official Weblloc: www.arducam.com