KINGBOLEN BM580 6V/12V Car Battery Tester Instruction Manual

1. Producte acabatview

The KINGBOLEN BM580 is a professional 6V/12V battery tester designed to accurately assess the health and performance of various vehicle batteries and their charging systems. It provides quick and precise test results for a wide range of battery types and applications.

Característiques principals:

• Supports 6V and 12V batteries, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, and EFB types.
• Tests batteries with CCA ratings from 100 to 2000, and capacities from 2AH to 200AH.
• Performs four main test functions: Battery Health Test, Cranking Test, Charging System Test, and Load Test.
• Features a 2.4-inch color LCD screen for clear display of results.
• Intelligent polarity identification prevents damage from incorrect connections.
• Multilingual support for enhanced user experience.
• Capable of testing various vehicles including cars, motorcycles, ATVs, trucks, and boats.

2. Informació de seguretat

Please read and understand all safety instructions before using the KINGBOLEN BM580 battery tester. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Protecció ocular: Always wear ANSI-approved eye protection when working near batteries.
• Ventilació: Ensure adequate ventilation when working with lead-acid batteries, as they can produce explosive gases.
• Evitar les espurnes: Do not smoke or allow sparks or flames in the vicinity of the battery or engine.
• Neteja els terminals: Ensure battery terminals are clean and free of corrosion before connecting the tester.
• Connexió adequada: Connecteu el cl vermellamp al terminal positiu (+) i al cl negreamp to the negative (-) terminal. Although the BM580 features polarity reverse protection, correct connection is always recommended.
• Aïllament: Do not touch uninsulated parts of the clamps or wires when the tester is connected to a battery.
• Nens i animals de companyia: Mantingueu el dispositiu fora de l'abast dels nens i les mascotes.
• Equipament danyat: Do not operate the tester if it has been dropped or damaged.

3. Contingut del paquet

The KINGBOLEN BM580 package typically includes the following items:

• KINGBOLEN BM580 Battery Tester Unit
• Manual d'usuari (aquest document)
• USB Cable (for data transfer and software updates)

4. Configuració i connexió

Follow these steps to properly connect the KINGBOLEN BM580 battery tester to your vehicle's battery.

1. Assegureu-vos que el contacte del vehicle estigui apagat i que tots els accessoris estiguin apagats.
2. Locate the vehicle's battery.
3. Connecteu el positiu vermell (+) clamp of the tester to the positive (+) terminal of the battery.
4. Connecteu el negatiu negre (-) clamp of the tester to the negative (-) terminal of the battery.
5. El provador s'encén automàticament un cop connectat.

The BM580 is designed with intelligent polarity identification, meaning it will function correctly even if the clamps are connected in reverse. This feature helps prevent damage to the tester and the battery.

5. Instruccions de funcionament

The KINGBOLEN BM580 offers several testing functions accessible via its intuitive menu. Use the navigation buttons (Up, Down, Left, Right, OK, Return) to navigate through the menus.

5.1. Battery Test (Health Test)

This test assesses the overall health of the battery, including its State of Health (SOH) and State of Charge (SOC).

1. From the main menu, select "Battery Test" or "Check".
2. Seleccioneu el tipus de bateria (per exemple, normal inundada, AGM de placa plana, AGM espiral, GEL, EFB).
3. Enter the battery's CCA (Cold Cranking Amps) rating as indicated on the battery label.
4. The tester will perform the analysis and display results such as voltage, measured CCA, SOH, and SOC.

5.2. Cranking Test (Starting System Test)

This test evaluates the vehicle's starting system, including the starter motor, by analyzing the cranking voltage i el temps.

1. Al menú principal, seleccioneu "Prova de cigonyal".
2. Seguiu les instruccions que apareixen a la pantalla per engegar el motor.
3. The tester will record and display the cranking voltage and cranking time, indicating the starter's performance.

5.3. Charging System Test (Alternator Test)

This test checks the vehicle's charging system, including the alternator, rectifier diode, and charging current, to ensure it's functioning correctly.

1. Al menú principal, seleccioneu "Prova de càrrega".
2. Follow the on-screen instructions, which typically involve starting the engine and revving it to a specified RPM.
3. The tester will analyze the charging voltage and ripple, providing a diagnosis of the charging system's health.

5.4. Load Test

This test determines if the battery has sufficient capacity to power all electrical equipment under load.

1. Al menú principal, seleccioneu "Càrrega de prova".
2. Follow the on-screen instructions, which may involve turning on specific vehicle accessories.
3. The tester will measure the battery's voltage under load and provide an assessment of its capacity.

5.5. Screenshot Function

The BM580 allows users to capture screenshots of test results for later review o la impressió.

• To take a screenshot, press and hold the "Return" button and simultaneously press the "Up" arrow button.
• Screenshots are saved internally and can be transferred to a computer via the USB cable.

6. Manteniment

Proper maintenance ensures the longevity and accuracy of your KINGBOLEN BM580 battery tester.

• Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Emmagatzematge: Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures.
• Cura del cable: Inspect the test cables and clampReviseu regularment si hi ha signes de danys. Substituïu-lo si cal.
• Actualitzacions de programari: The BM580 supports firmware updates via USB. Check the official KINGBOLEN website for the latest software versions and instructions.

7. Solució De Problemes

If you encounter issues with your BM580, refer to the following common troubleshooting steps:

• El dispositiu no s'encén:
  • Assegureu-vos que el clamps estan connectats de manera segura als terminals de la bateria.
  • Verify the battery has sufficient voltage (above 6V for 6V batteries, above 12V for 12V batteries) to power the device.
  • Check for any damage to the cables or clamps.
• Resultats de proves inexactes:
  • Assegureu-vos que els terminals de la bateria estiguin nets i sense corrosió.
  • Verify the correct battery type and CCA rating have been entered into the tester.
  • Ensure all vehicle accessories are off during testing.
• Pantalla congelada o no respon:
  • Disconnect the tester from the battery, wait a few seconds, and reconnect it.
  • Si el problema persisteix, poseu-vos en contacte amb el servei d'atenció al client.

8. Especificacions

Technical specifications for the KINGBOLEN BM580 battery tester.

9. Garantia i Suport

KINGBOLEN products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official KINGBOLEN weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Si us plau, conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.