YOBRO Candy Dispenser Instruction Manual

1. Producte acabatview

The YOBRO Candy Dispenser (Model WSG11291) is a compact, manual device designed to dispense small candies and snacks. Its simple operation and easy maintenance make it suitable for various settings.

Imatge 1.1: Frontal view of the YOBRO Candy Dispenser, showcasing its design and candy compartment.

Imatge 1.2: Anglesa view of the YOBRO Candy Dispenser, highlighting its compact size.

2. Setup and Filling

Follow these steps to prepare your YOBRO Candy Dispenser for use:

1. Desmuntar: Gently remove the back panel of the dispenser.
2. Neteja: Before first use, hand wash all removable parts with mild soap and water. Ensure all parts are completely dry before reassembly.
3. Omplir: Carefully pour your desired candies into the main compartment.
4. Torneu a muntar: Securely attach the back panel. Ensure it clicks into place to prevent accidental detachment.

Image 2.1: Visual guide for disassembling, filling, and reassembling the candy dispenser.

Important Considerations for Candy Selection:

• The dispenser is designed for mini candies and snacks.
• Do not use gummy candies, as they may stick and cause blockages.
• Candies should be under 1 inch (approximately 20mm) in length or diameter to ensure proper dispensing.

Image 2.2: Illustration of the candy size limitation, indicating suitability for candies under 1 inch.

Image 2.3: The dispenser can hold approximately 16 ounces of candy.

3. Instruccions de funcionament

To dispense candies, simply pull the lever located on the front right side of the machine. A small portion of candy will be released into the collection tray at the bottom.

Image 3.1: Demonstrating the action of pulling the dispensing lever.

Image 3.2: Candies falling into the collection tray after the lever is pulled.

4. Manteniment i cura

Regular cleaning ensures hygiene and optimal performance of your candy dispenser.

• Neteja: Disassemble the dispenser as shown in Section 2. Hand wash all parts with warm, soapy water. Rinse thoroughly and allow to air dry completely before reassembly.
• Emmagatzematge: Store the dispenser in a cool, dry place away from direct sunlight when not in use.

5. Solució De Problemes

If you encounter issues with your YOBRO Candy Dispenser, refer to the following common problems and solutions:

• Candies not dispensing or lever is stiff:
  • Ensure the candies are not gummy or sticky.
  • Verify that the candies are within the recommended size (under 1 inch). Overly large candies can cause blockages.
  • Check for any foreign objects obstructing the dispensing mechanism.
• Back panel detaches easily:
  • Ensure the back panel is securely fastened after filling. Apply gentle pressure until it clicks into place.
• Dispensing lever feels loose or damaged:
  • Operate the lever with gentle, consistent force. Avoid excessive pulling or twisting.

6. Especificacions