1. Informació de seguretat
Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.
- Risc d'incendi: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
- Risc de descàrrega elèctrica: La instal·lació del kit de retrofit LED requereix coneixements dels sistemes elèctrics de lluminàries. Si no està qualificat, no intenteu la instal·lació. Poseu-vos en contacte amb un electricista qualificat.
- Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
- To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Aquesta lamp is not intended for use with emergency exit luminaires or emergency lights.
- Abans d'intentar la instal·lació, comproveu el vostre codi elèctric local, ja que estableix estàndards de cablejat per a la vostra localitat.
- The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
- Do not leave bare wires or exposed outside the wire nut connectors.
- No feu ni modifiqueu cap forat obert en un recinte de cablejat o components elèctrics durant la instal·lació del kit.
- This product is ETL Listed and operates at 120VAC.
2. Producte acabatview
The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.
- Eficient energètic: 9W LED, equivalent to 40W, consuming less power.
- Brillantor: 550 Lumens with anti-glare lighting and a 36° beam spread.
- Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
- Regulable: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
- CRI alt: 90 CRI rating for accurate color appearance.
- Construcció duradora: Features a durable cast aluminum body and deep recessed trim.
- Damp Valoració: Apte per al seu ús en damp locations such as bathrooms and kitchens.
Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black
3. Llista de peces
Assegureu-vos que tots els components estiguin presents abans de començar la instal·lació:
- LED Downlight with spring clips
- Junction Box (with integrated CCT selection switch)
- Connector cable (pre-attached to downlight and junction box)
- Junta d’escuma
Figura 3.1: lateral view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.
4. Configuració i instal·lació
This downlight is designed for easy installation without the need for a traditional recessed can or housing.
- Prepara l'obertura: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
- Connecteu el cablejat: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
- Seleccioneu la temperatura de color: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
- Position Junction Box: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
- Connect Downlight: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
- Instal·lació de llums de sostre: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.
Figura 4.1: Dimensions del producte per a la planificació de la instal·lació.
Figure 4.2: CCT selection switch inside the junction box.
Video 4.1: Official product video demonstrating the features and installation of the Maxxima 2-inch Anti-Glare 5 CCT Slim LED Downlight.
5. Instruccions de funcionament
Once installed, operating your Maxxima LED downlight is straightforward.
5.1. Color Temperature Selection
The desired color temperature (CCT) must be selected using the switch inside the junction box abans installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.
Figure 5.1: Visual comparison of selectable color temperatures.
5.2. Atenuació
This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.
Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.
6. Manteniment
The Maxxima LED downlight requires minimal maintenance.
- Neteja: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Sense peces reparables per l'usuari: The LED light source is integrated and not replaceable. Do not attempt to open or repair the fixture.
7. Solució De Problemes
Si teniu problemes amb el vostre downlight, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | No power supply; Loose wiring; Incorrect CCT setting; Faulty fixture | Check circuit breaker; Verify all wire connections are secure; Ensure CCT switch is set to a valid position; Contact support if fixture is faulty. |
| La llum parpelleja | Incompatible dimmer; Loose wiring; Overloaded circuit | Ensure dimmer is LED compatible; Check all electrical connections; Reduce load on circuit. |
| La llum és massa tènue o massa brillant | Dimmer setting; CCT setting | Adjust dimmer to desired level; Verify CCT setting is as intended. |
| La llum fa un soroll de brunzit | Incompatible dimmer; Loose wiring | Replace with an LED-compatible dimmer; Check and secure all wiring connections. |
8. Especificacions
| Especificació | Detall |
|---|---|
| Marca | Màxima |
| Nom del model | MRL-S20803B |
| Dimensions del producte | 3.16 cm de llargada x 3.16 cm d'amplada x 2.6 cm d'alçada |
| Pes de l'article | 13.1 unces |
| Color | Negre |
| Material | Alumini |
| Forma de llum | Encastat |
| Tipus d'instal·lació | Muntatge d'escorredor |
| Recort de forat recomanat | 2.5 polzades |
| Font d'alimentació | Elèctric amb cable |
| Voltage | 120 Volts |
| Wattage | 9 watts |
| Brillantor | 550 lúmens |
| Eficiència | 61 lm/W |
| Temperatura de color | 2700K, 3000K, 3500K, 4000K, 5000K seleccionables |
| CRI | 90 |
| Regulable | Sí (20%-100%) |
| Ús interior/exterior | Interior (D)amp Classificat) |
| Certificació | Llistat per ETL |
9. Garantia i Suport
This Maxxima LED downlight is covered by a 3 any de garantia des de la data de compra.
For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima weblloc web per obtenir informació de contacte actualitzada.
Si us plau, conserveu el comprovant de compra per motius de garantia.
