1. Introducció
This user manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your KLARUS XT2CR Pro Tactical Flashlight. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Informació de seguretat
- No encengueu la llanterna directament als ulls.
- Mantenir fora de l'abast dels nens.
- Use only recommended batteries and charging methods.
- Avoid disassembling the flashlight head or tail cap unless specified for maintenance.
- Ensure the USB-C port cover is securely closed when not charging, especially in wet conditions.
3. Contingut del paquet
Your KLARUS XT2CR Pro package includes the following items:
- KLARUS XT2CR Pro Tactical Flashlight
- 18650 Li-ion Battery (3100mAh)
- Cable de càrrega USB-C
- Funda
- Corda
- Junta tòrica de recanvi
- Manual d'usuari (aquest document)
Image: Contents of the KLARUS XT2CR Pro package, including the flashlight, holster, charging cable, lanyard, and spare O-ring.
4. Configuració
4.1. Instal·lació de la bateria
The KLARUS XT2CR Pro comes with a pre-installed 18650 Li-ion battery. Ensure the battery is inserted with the positive (+) end facing towards the flashlight head (LED end).
4.2. Carregant la bateria
The flashlight features a convenient USB-C charging port. To charge:
- Locate the USB-C charging port on the side of the flashlight head.
- Aixequeu suaument la coberta de goma per exposar el port.
- Connect the provided USB-C cable to the flashlight and a USB power source (e.g., wall adapter, power bank, computer USB port).
- The indicator light next to the charging port will show charging status: Red for charging, Green for fully charged.
- Once charging is complete, securely close the rubber cover to maintain waterproof integrity.
Image: The flashlight connected to a USB-C charging cable, showing the charging indicator light. Red indicates charging, green indicates fully charged.
Vídeo: Una anàlisi completaview of the KLARUS XT2CR Pro Tactical Flashlight, demonstrating its features and functionality.
5. Instruccions de funcionament
The XT2CR Pro features dual tail switches and a side switch for versatile operation.
5.1. Dual Tail Switches
- Main Switch (Large, Circular): Press for momentary ON/OFF. Fully press and click for constant ON/OFF. Always activates Turbo mode.
- Mode Switch (Smaller, Paddle-shaped): Provides instant access to Strobe (Tactical Setting) or Low (Outdoor Setting).
5.2. Side Switch
- When the flashlight is ON, press the side switch to cycle through brightness levels (Low > Medium > High > Turbo).
- Press and hold the side switch for 1 second to activate SOS mode.
5.3. Switching Operating Modes (Tactical/Outdoor)
The XT2CR Pro offers two programmable settings: Tactical and Outdoor. To switch between them:
- Ensure the flashlight is OFF.
- Press and hold the side switch until the indicator light flashes red and green.
- While the indicator is flashing, simultaneously press the main tail switch. The flashlight will switch to the other mode.
Image: Close-up of the dual tail switches, highlighting the main circular switch and the paddle-shaped mode switch for tactical and outdoor settings.
Video: Demonstrates the XT2CR Pro's operating modes and how to switch between them, including the instant turbo and strobe functions.
6. Manteniment
- Clean the flashlight body and lens with a soft, damp tela.
- Lubricate O-rings regularly with silicone grease to maintain waterproof sealing.
- If the flashlight is not used for an extended period, remove the battery to prevent leakage.
- Emmagatzemar en un lloc fresc i sec, lluny de la llum solar directa.
Image: The flashlight submerged in water, demonstrating its IPX8 waterproof rating, which supports adventures in any weather.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llanterna no s'encén | Low battery; Incorrect battery installation; Loose tail cap | Charge battery; Reinstall battery correctly; Tighten tail cap |
| Llum intermitent | Dirty contacts; Loose components | Clean battery and flashlight contacts; Ensure all parts are tightened |
| No es pot canviar de mode | Incorrect operation sequence | Refer to "Switching Operating Modes" section (5.3) |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | KLARUS |
| Model | XT2CR Pro |
| Sortida màxima | 2100 lúmens |
| Distància del feix | 240 metres (262 iardes) |
| Temps d'execució | Fins a 150 hores (mode baix) |
| Tipus de LED | Cree XPH35 HD LED (6500K Color Light) |
| Material | Aluminum 6061-T6 with Mil-Spec HAIII Anodized Finish |
| Resistència a l'aigua | IPX8 (Submergible fins a 2 metres) |
| Resistència a l'impacte | 1 metre |
| Dimensions | 1.08 x 1.02 x 5.04 polzades |
| Pes | 4.9 unces (sense bateria) |
9. Garantia i assistència
KLARUS offers a warranty for its products. For detailed warranty information and customer support, please visit the official KLARUS weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Per a més ajuda, també podeu consultar la KLARUS Brand Store on Amazon.
