Introducció
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your BONTEC TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
The BONTEC TV Wall Mount is designed to securely hold LED, LCD, and OLED TVs ranging from 13 to 43 inches, with a maximum weight capacity of 20 kg (44 lbs). It offers versatile viewing options with tilt, swivel, and 3600 rotation capabilities.
Informació de seguretat
ADVERTIMENT:
- No supereu la capacitat màxima de pes de 20 kg (44 lliures).
- Assegureu-vos que l'estructura de la paret pugui suportar amb seguretat el pes combinat del suport i del televisor.
- This mount is designed for installation on solid concrete walls or wood studs. Do not mount on drywall alone.
- Always use appropriate safety equipment during installation.
- Follow all installation steps precisely. Improper installation may result in serious injury or damage to property.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
Contingut del paquet
Before beginning installation, verify that all components are present and undamaged. If any parts are missing or defective, contact BONTEC customer support immediately.
Llista de maquinari:
- Wall Anchors (Concrete) x2
- Lag Bolts x2
- Washers (φ6mm) x2
- Cargols M4 * 12 mm
- Cargols M6 * 16 mm
- Cargols M8 * 20 mm
- Espaciadors D8*5mm
- Volandes quadrades M4/M6/M8
- M6 Cushioned Nut
- Cargols M6 * 10 mm
- Clau anglesa
- Nivell de bombolla
- Brides de cable x3
Configuració i instal·lació
Before starting, ensure you have the necessary tools: a drill, a screwdriver, a stud finder (if mounting on wood studs), and a pencil.
Instal·lació pas a pas:
Step 1: Prepare the Wall Plate. Remove the two pre-installed screws from the wall plate. Mount the wall plate securely to your chosen wall location. For wood studs, use the lag bolts. For concrete or brick walls, use the concrete anchors and lag bolts. Ensure the plate is level using the included bubble level.
Image illustrating the initial step of removing pre-installed screws and securing the wall plate to the wall. Step 2: Attach Extenders to TV Plate. Attach the extender brackets to the main TV plate. These extenders allow compatibility with various VESA patterns (100x100mm, 100x200mm, 200x100mm, 200x200mm).
Figure 3: Available VESA Patterns. This diagram shows the different VESA mounting configurations supported by the mount, indicating the distances between the four mounting holes on the TV back. Step 3: Mount VESA Plate to TV. Secure the assembled VESA plate to the back of your TV using the appropriate TV mounting screws and spacers. Ensure a snug fit without overtightening.
Step 4: Hang TV onto Wall Bracket. Carefully lift your TV with the attached VESA plate and hook it onto the wall bracket. Ensure it is securely seated.
Step 5: Tighten Security Screws. Tighten the security screws to fix the VESA plate to the wall bracket, preventing accidental dislodgement.
Pas 6: ajust Viewangle ing. Adjust the TV to your desired viewing angle using the tilt, swivel, and rotation features.
Image demonstrating the swivel capability of the TV mount, allowing for adjustment of the viewangle de ing.
Instruccions de funcionament
The BONTEC TV Wall Mount offers flexible positioning for optimal viewing.
- Ajust d'inclinació: The mount allows for +50/-100 tilting. Loosen the tilt adjustment knobs, set the desired angle, and re-tighten to secure. This helps reduce glare and optimize vertical viewing.
- Ajust de gir: The articulated arm allows for +/-900 swivel. Gently push or pull the TV to the left or right to achieve the desired horizontal viewing angle. The maximum swivel angle depends on the TV size.
- Ajust de rotació: The mount supports 3600 rotation, allowing for landscape or portrait orientation. Carefully rotate the TV to the desired orientation.
- Extensió/Retracció: The mount extends up to 38cm (15 inches) from the wall and retracts to 6.5cm (2.6 inches) to save space. Gently pull or push the TV to adjust the distance from the wall.
Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Comprovacions periòdiques: Periodically check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments may cause them to loosen.
- Lubricació: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant can be applied to the moving joints. Avoid oil-based lubricants that may attract dust.
- Gestió de cables: Use the included cable ties to neatly manage cables, preventing strain and entanglement.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | Wall plate not level; TV not properly seated on mount. | Re-check wall plate level and adjust if necessary. Ensure TV is fully seated and security screws are tightened. |
| La muntura sembla inestable o trontolla. | Loose mounting screws; incorrect wall type; overloaded mount. | Tighten all wall and TV mounting screws. Verify wall type is suitable. Ensure TV weight does not exceed 20 kg. |
| Dificultat per ajustar la inclinació/gir/rotació. | Joints are stiff; adjustment knobs/screws are too tight. | Loosen adjustment knobs/screws slightly. Apply silicone lubricant to stiff joints if needed. |
| Falten peces. | Error d'embalatge. | Poseu-vos en contacte amb el servei d'atenció al client de BONTEC amb els detalls de la vostra compra. |
Especificacions
- Model: CT127-v02
- Material: Compressed Steel
- Color: Negre
- Compatibilitat de la mida del televisor: 13 - 43 polzades
- Capacitat de pes: Fins a 20 kg
- Compatibilitat VESA: 100x100mm, 100x200mm, 200x100mm, 200x200mm
- Angle d'inclinació: +50 to -100
- Angle de gir: +/-900 (max angle depends on TV size)
- Rotació: 360 0
- Distància de paret: 6.5cm (min) to 38cm (max)
Garantia i Suport
BONTEC products are manufactured with quality and reliability in mind. For warranty information or technical support, please contact BONTEC customer service through their official weblloc web o el venedor on es va comprar el producte.
Please have your model number (CT127-v02) and purchase date available when contacting support.
Per a més informació, visiteu el Botiga BONTEC a Amazon.
