DROK 6-in-1 AC LCD Digital Power Monitor

Producte acabatview

The DROK 6-in-1 AC LCD Digital Power Monitor is a versatile instrument designed for precise measurement and display of various electrical parameters. This device integrates six functions into one compact unit, providing comprehensive data for AC circuits.

Figura 1: Frontal view of the DROK 6-in-1 AC LCD Digital Power Monitor with its current transformer (CT).

Característiques principals:

• Mesura 6 en 1: Simultaneously displays AC Voltage, AC Current, Active Power, Electrical Energy (kWh), Power Frequency (Hz), and Power Factor (PF).
• Ampli rang de mesura:
  • Voltage: CA 80.0-300.0V
  • Corrent: 0-100A
  • Potència: 0-30000W
  • Electrical Energy: 0-99999kWh
  • Freqüència: 45.0Hz-65.0Hz
  • Power Factor: 0.00-1.00PF
• Pantalla LCD en colors: Features a digital LCD color screen for clear and easy-to-read data.
• Automatic Data Storage: Electrical energy data is automatically saved and remembered when power is off, and can be manually reset.
• Nota important: This meter is designed for measuring pure AC city power (50-60Hz) only. It is not suitable for square wave, inverter output, or modified sine wave circuits, as this may cause damage to the device.

Configuració i instal·lació

Proper installation is crucial for the accurate and safe operation of the DROK 6-in-1 AC LCD Digital Power Monitor. Please follow the wiring diagram carefully.

Figure 2: Wiring Diagram. Connect voltage input to green terminals and thread the testing circuit wire through the CT for current input to blue terminals.

1. Voltage Input Connection: Connect the AC 80-300V power supply to the green terminals (Measure Voltage Input). Ensure correct polarity if specified, though for AC, it's generally less critical for measurement.
2. Current Transformer (CT) Connection:
   • Thread the wire of the testing circuit (the load) through the hole of the Current Transformer (CT).
   • Connect the blue wires from the CT to the blue terminals (Current Transformer Input).

   Precaució: It will damage the instruments if the voltage input wires and CT wires are connected incorrectly. Always ensure power is off before making any connections.

3. Muntatge: The meter is designed for panel mounting. Refer to the dimensions for appropriate cutout size.
   

   Figure 3: Product dimensions for panel mounting. The meter measures approximately 79mm (3.1in) in length, 43mm (1.7in) in width, and 48mm (1.9in) in depth, with a panel cutout of 39.9mm (1.5in).

Instruccions de funcionament

Once properly installed and powered on, the DROK 6-in-1 AC LCD Digital Power Monitor will automatically display the measured parameters on its colorful LCD screen.

Figure 4: The meter's LCD display showing Voltage (V), Current (A), Power (W), Frequency (Hz), Electrical Energy (kWh), and Power Factor (PF).

• Lectura de la pantalla: The screen is divided to clearly show each of the six parameters. Values are updated in real-time.
• Electrical Energy (kWh) Reset: To reset the accumulated electrical energy data, locate the small button on the front panel of the meter (typically on the right side, as shown in Figure 4). Press and hold this button for approximately 5 seconds until the kWh reading resets to zero. This function allows for monitoring energy consumption over specific periods.
  

  Figure 5: Location of the reset button on the front panel.

• Automatic Data Storage: The electrical energy data (kWh) is automatically saved and retained even if the power supply to the meter is interrupted. This ensures that energy consumption data is not lost during power outages.

Manteniment i Seguretat

To ensure the longevity and safe operation of your DROK power monitor, please observe the following guidelines:

• Neteja: Feu servir un drap suau i sec per netejar la pantalla iasing. No utilitzeu productes de neteja abrasius ni dissolvents.
• Entorn de funcionament:
  • Temperatura: -10°C a +50°C
  • Humitat: 10% a 80% (sense condensació)
  • Pressure: 80 to 106kPa
  • Eviteu l'exposició directa a la llum solar o a temperatures extremes.
• Compatibilitat amb fonts d'alimentació: This meter is strictly designed for use with pure AC city power (50-60Hz). Connecting it to square wave, inverter output, or modified sine wave circuits will cause irreversible damage and void the warranty.
• Seguretat elèctrica: All wiring and installation should be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected before any installation or maintenance.

Resolució de problemes

If you encounter issues with your DROK 6-in-1 AC LCD Digital Power Monitor, please refer to the following common troubleshooting steps:

• Sense pantalla/alimentació:
  • Check all power connections to ensure they are secure and correctly wired to the voltage terminals d'entrada.
  • Comproveu que l'entrada voltage is within the specified range of AC 80.0-300.0V.
• Incorrect Current Reading:
  • Ensure the wire of the circuit being measured is correctly threaded through the Current Transformer (CT).
  • Verify that the CT wires are securely connected to the blue terminals on the meter.
• Lectures inexactes:
  • Confirm that the power source is pure AC city power (50-60Hz). Using the meter with square wave, inverter output, or modified sine wave sources will result in inaccurate readings and potential damage.
  • Check for loose connections that might affect measurement accuracy.
• Electrical Energy (kWh) Not Resetting:
  • Ensure you are pressing and holding the reset button for the required duration (approximately 5 seconds).

If the problem persists after attempting these steps, please contact DROK customer support for further assistance.

Especificacions

Garantia i Suport

For information regarding product warranty, returns, or technical support, please refer to the official DROK weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Fabricant: DROK

Número de peça: 200444_JPN

Primera data disponible: 30 de juny de 2021