1. Introducció
This manual provides essential information for the proper use, installation, and maintenance of your LICHIFIT HEPA Replacement Filter. Designed to maintain the optimal performance of your vacuum cleaner, this filter effectively captures fine dust, pet dander, and other airborne particles, contributing to a cleaner home environment.

Image of the LICHIFIT HEPA replacement filter, showing its pleated design and black plastic frame.
2. Compatibilitat
The LICHIFIT HEPA Replacement Filter (Model: LCAECDM2139-1) is specifically designed for use with the following vacuum cleaner models:
- Rowenta X-PERT 160
- Rowenta ZR005202
Using this filter with incompatible models may result in reduced performance or damage to your appliance.
3. Guia d'instal·lació
Follow these steps to replace the HEPA filter in your compatible Rowenta vacuum cleaner. Always ensure the vacuum cleaner is turned off and unplugged before performing any maintenance.
- Localitzeu el compartiment del filtre: Refer to your vacuum cleaner's original manual to identify the filter housing. This is typically located near the dustbin or motor assembly.
- Traieu el filtre antic: Carefully twist or pull out the old filter. Dispose of the old filter responsibly.
- Inseriu el filtre nou: Align the new LICHIFIT HEPA filter with the compartment. Gently push or twist it into place until it is securely seated. Ensure a snug fit to prevent air leakage.
- Reassemble the Vacuum: Close the filter compartment and reattach any removed parts, such as the dustbin.
- Prova de funcionament: Plug in and turn on your vacuum cleaner to ensure it operates correctly with the new filter installed.

De dalt a baix view of the LICHIFIT HEPA filter, showing the circular opening and internal support structure, crucial for proper alignment during installation.

Bottom-up view of the LICHIFIT HEPA filter, showing the base and the connection point, which must securely fit into the vacuum cleaner's housing.
4. Manteniment
While this filter is designed for effective filtration, regular maintenance can extend its lifespan and maintain optimal vacuum performance. The LICHIFIT HEPA filter is reusable.
- Neteja regular: It is recommended to clean the filter regularly, especially if you notice a decrease in suction power. Gently tap the filter over a waste bin to dislodge accumulated dust and debris.
- Washing (if applicable): If the filter is heavily soiled, it can be rinsed under cool, running water. Ensure the filter is completely dry before reinserting it into the vacuum cleaner. Allow at least 24 hours for air drying. Do not use hot water or detergents. Do not machine wash.
- Horari de substitució: For optimal performance and air quality, it is generally recommended to replace HEPA filters every 3 to 6 months, depending on usage and household conditions (e.g., presence of pets, allergies).
5. Solució De Problemes
If you encounter issues after replacing your filter, consider the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Potència de succió reduïda | Filter is clogged or not seated correctly. | Clean the filter or re-install it, ensuring it is securely in place. Check for blockages in the vacuum's hose or brush roll. |
| Unusual Odor from Vacuum | Filter is dirty or wet. | Clean the filter thoroughly and ensure it is completely dry before use. Consider replacing the filter if odor persists. |
| Filter Does Not Fit | Incorrect filter model for your vacuum. | Verify your vacuum cleaner model against the compatible models listed in this manual. Ensure you have the correct LICHIFIT filter. |
6. Especificacions
| Atribut | Detall |
|---|---|
| Nom del producte | LICHIFIT HEPA Replacement Filter |
| Número de model | LCAECDM2139-1 |
| Tipus de material | HEPA |
| Pes de l'article | Aproximadament 1.76 unces (50 grams) |
| Dimensions del paquet | 9.02 x 4.41 x 2.64 polzades (aprox.) |
| Reutilitzabilitat | Reutilitzable (rentable) |
| Models compatibles | Rowenta X-PERT 160, ZR005202 |

Diagram showing the approximate dimensions of the LICHIFIT HEPA filter: 95mm height, 70mm base diameter, 30mm top diameter, and 42g net weight.
7. Informació de seguretat
Si us plau, observeu les precaucions de seguretat següents:
- Always ensure the vacuum cleaner is unplugged before installing, removing, or cleaning the filter.
- Keep replacement filters and packaging materials out of reach of children and pets to prevent choking or suffocation hazards.
- Do not use damaged filters. Replace them immediately if you notice any tears or deformities.
- Ensure the filter is completely dry before reinserting it into the vacuum cleaner to prevent damage to the appliance or mold growth.

Image of a plastic bag with multi-language warning labels about choking and suffocation hazards, stating 'This bag is not a toy'.
8. Garantia i Suport
For information regarding warranty, returns, or customer support for your LICHIFIT HEPA Replacement Filter, please refer to the seller's policies on the platform where the product was purchased or contact LICHIFIT customer service directly through their official channels. Keep your proof of purchase for any warranty claims.





