Tempur-Pedic TP7000 Mesh Back Fabric Task Chair Instruction Manual

1. Introducció

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your Tempur-Pedic TP7000 Mesh Back Fabric Task Chair. Please read all instructions carefully before use and retain this manual for future reference.

2. Informació de seguretat

• Capacitat de pes màxim: This chair is designed to support a maximum weight of 250 pounds (113 kg). Exceeding this limit may cause damage to the chair or personal injury.
• Ús previst: This chair is intended for office and task use. Do not use it for purposes other than its intended design.
• Muntatge: Ensure all components are securely fastened before using the chair. Periodically check all bolts and screws for tightness.
• Estabilitat: Avoid standing on the chair or using it as a step stool. Do not lean excessively to one side or the back, as this may cause the chair to tip over.
• Nens: Keep children away from the chair during assembly. Do not allow children to play on or around the chair.

3. Contingut del paquet

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Chair Back (Mesh)
• Chair Seat (Fabric with Tempur Material)
• Reposabraços (2)
• Chair Base (5-star with casters)
• Cilindre d'elevació de gas
• Placa de mecanisme
• Paquet de ferramenta (cargols, volanderes, clau Allen)

4. Muntatge i muntatge

Follow these steps to assemble your Tempur-Pedic TP7000 Task Chair. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.

1. Fixeu les rodes a la base: Introduïu les cinc rodes als forats de l'extrem de cada pota de la base de la cadira. Premeu fermament fins que encaixin al seu lloc.
2. Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base de la cadira muntada.
3. Fixeu la placa del mecanisme al seient: Align the mechanism plate with the pre-drilled holes on the underside of the chair seat. Secure it using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. Fixar els reposabraços al seient: Attach the armrests to the sides of the chair seat using the designated screws. Do not fully tighten yet.
5. Attach Backrest to Seat/Mechanism: Align the backrest with the mounting points on the mechanism plate or seat. Secure with screws. Once the backrest is attached, fully tighten all armrest screws.
6. Connecteu el conjunt del seient a l'elevador de gas: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que l'extrem cònic de l'elevació de gas encaixi correctament a la placa del mecanisme.

5. Instruccions d'ús (ajustos)

Your Tempur-Pedic TP7000 chair offers several adjustments to customize your seating experience for optimal comfort and support.

• Ajust de l'alçada del seient: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Ajust de l'alçada del recolzabraços: Press the button on the side of each armrest and move the armrest up or down to your preferred height. Release the button to lock it in place.
• Bloqueig/Desbloqueig d'inclinació: The chair features a single reclining position. To allow the chair to recline, pull the lever (usually the same as the height adjustment lever, or a separate one) outwards. To lock the chair in an upright position, push the lever inwards.
• Ajust de la tensió d'inclinació: Rotate the round knob located under the front of the seat to adjust the tension of the recline. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

6. Manteniment

Proper care will extend the life and appearance of your chair.

• Neteja: The fabric seat and mesh back should be spot cleaned only. Use a mild detergent and a damp cloth. Do not saturate the fabric. Test any cleaning solution on an inconspicuous area first.
• Inspecció: Periodically inspect all bolts, screws, and connections to ensure they are tight. Retighten as necessary.
• Rodes: Mantingueu les rodes lliures de cabells i deixalles per garantir un moviment suau.
• Eviteu productes químics durs: Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the chair's materials.

7. Solució De Problemes

Si teniu problemes amb la cadira, consulteu els següents problemes i solucions habituals:

• La cadira s'enfonsa o no es manté dreta:
  Solució: The gas lift cylinder may be faulty. Contact customer support for a replacement.
• Grinyols de cadira:
  Solució: Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving parts if the squeaking persists.
• Casters Do Not Roll Smoothly:
  Solució: Remove any hair or debris wrapped around the caster wheels. Clean the wheels with a damp tela.
• La cadira no s'inclina:
  Solució: Ensure the tilt lock lever is disengaged (pulled outwards). Adjust the tilt tension knob counter-clockwise to reduce tension.

8. Especificacions

9. Garantia i Suport

Your Tempur-Pedic TP7000 Mesh Back Fabric Task Chair is backed by a Garantia limitada de per vida. This warranty covers defects in materials and workmanship under normal use. Specific terms and conditions apply.

For warranty claims, technical support, or to order replacement parts, please contact Tempur-Pedic customer service. Refer to your purchase documentation or the official Tempur-Pedic weblloc web per obtenir la informació de contacte més actualitzada.

When contacting support, please have your model number (TP7000) and proof of purchase readily available.