ARUBA 60 cm Wall-Mounted Vanity Unit

1. Introducció

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Vente-unique ARUBA 60 cm Wall-Mounted Vanity Unit. This unit is designed for bathroom use and features a natural wood-effect finish with white drawer fronts. It includes two soft-close drawers for storage and is intended for wall-mounting. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Informació de seguretat

• Llegiu totes les instruccions abans del muntatge i la instal·lació.
• Ensure all parts are present and undamaged before starting assembly. Do not proceed if any parts are missing or damaged.
• Assembly should be performed by at least two adults to prevent injury and damage to the product.
• Feu servir les eines adequades tal com s'especifica a la secció de muntatge.
• Always secure the vanity unit to a solid wall structure using the provided mounting hardware. Failure to do so may result in the unit tipping over, causing serious injury or damage.
• Mantingueu les peces petites i els materials d'embalatge lluny dels nens per evitar perills d'asfixia.
• No sobrecarregueu els calaixos. Distribuïu el pes uniformement.
• Avoid exposing the unit to excessive moisture or direct water spray.

3. Contingut del paquet

Verify that all components listed below are included in your package. If any items are missing or damaged, please contact Vente-unique customer service.

• Vanity Unit Body (1)
• Frontals de calaix (2)
• Drawer Sides and Backs (for 2 drawers)
• Drawer Bottoms (2)
• Soft-Close Drawer Slides (2 pairs)
• Assembly Hardware (screws, dowels, cam locks, wall mounting brackets, wall plugs)
• Manual d'instruccions (aquest document)

4. Muntatge i muntatge

4.1 Eines necessàries

• Tornavís Phillips
• Drill with appropriate drill bits (for wall mounting)
• Nivell d'esperit
• Cinta mètrica
• Llapis
• Martell (opcional, per a espigues)

4.2 Passos de muntatge

1. Prepara l'espai de treball: Clear a spacious, clean, and flat area for assembly. Lay down a blanket or cardboard to protect the unit's surfaces.
2. Assemble the Cabinet Body: Follow the diagrams provided in the separate assembly sheet (if included) to connect the side panels, back panel, and top/bottom panels using the provided screws, dowels, and cam locks. Ensure all connections are secure.
3. Munta els calaixos: Attach the drawer sides to the drawer fronts and backs. Insert the drawer bottoms into the grooves. Secure all connections.
4. Instal·leu les guies del calaix: Attach the cabinet portion of the soft-close drawer slides to the inside of the cabinet body according to the pre-drilled holes. Attach the drawer portion of the slides to the assembled drawers.
5. Inserir calaixos: Carefully align the drawer slides and push the drawers into the cabinet body until they click into place. Test the soft-close mechanism.
6. Preparació per al muntatge a la paret: Determine the desired height and location for the vanity unit on your bathroom wall. Use a spirit level and pencil to mark the positions for the wall mounting brackets. Ensure the marks are level and correspond to the mounting points on the unit.
7. Perforar forats pilot: Using an appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill pilot holes at the marked locations. Insert the wall plugs (if required for your wall type) into the pilot holes.
8. Fixeu els suports de paret: Secure the wall mounting brackets to the wall using the provided screws. Ensure they are firmly attached and level.
9. Mount the Vanity Unit: With the help of a second person, carefully lift the assembled vanity unit and align its mounting points with the wall brackets. Secure the unit to the brackets according to the instructions provided with the hardware. Double-check that the unit is stable and securely fastened to the wall.

Figura 1: The ARUBA 60 cm Wall-Mounted Vanity Unit with its two drawers in the closed position. This image illustrates the natural wood-effect finish on the sides and top, contrasting with the white drawer fronts, and the integrated handle design.

Figura 2: The ARUBA 60 cm Wall-Mounted Vanity Unit with both drawers partially open. This view demonstrates the internal storage capacity and the smooth operation of the drawer slides, highlighting the soft-close mechanism.

5. Operating the Vanity Unit

The ARUBA vanity unit is equipped with two drawers featuring a soft-close mechanism. To operate the drawers:

• Obertura: Gently pull the integrated handle on the drawer front to open.
• Tancament: Push the drawer gently until it engages with the soft-close mechanism. The drawer will then slowly and quietly close completely. Avoid forcing the drawer shut, as this can damage the mechanism.

6. Manteniment

Proper care will ensure the longevity and appearance of your vanity unit.

• Neteja: Netegeu les superfícies amb un suau, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for furniture. Immediately dry all surfaces with a clean, dry cloth to prevent water damage.
• Eviteu productes químics durs: Do not use abrasive cleaners, solvents, or ammonia-based products, as these can damage the finish.
• Protecció contra la humitat: While the unit is designed for bathroom environments, avoid prolonged exposure to standing water or excessive humidity. Promptly wipe up any spills.
• Mecanisme del calaix: Periodically check the drawer slides for smooth operation. Do not apply lubricants unless specifically recommended by the manufacturer.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For information regarding warranty coverage, spare parts availability, or any other support needs, please refer to your purchase documentation or contact Vente-unique customer service directly. Contact details can typically be found on the Vente-unique website or your order confirmation.