Introducció
This manual provides essential information for the installation, operation, and maintenance of your SRAM RED D1 Quarq Road Powermeter DUB. Please read this manual thoroughly before using the product to ensure proper function and safety.
The SRAM RED D1 Quarq Road Powermeter DUB is designed for cyclists seeking precise power measurement. It features revolutionary innovation and delivers performance that is simply second to none, helping you achieve the ultimate ride.
Image: The SRAM RED D1 Quarq Road Powermeter DUB crankset, featuring a black finish with silver chainrings and integrated power meter spider.
Informació de seguretat
Always wear appropriate safety gear when working on your bicycle. Ensure all components are installed correctly and torqued to manufacturer specifications. Improper installation can lead to serious injury or product damage. If you are unsure about any installation steps, consult a professional bicycle mechanic.
Configuració i instal·lació
The SRAM RED D1 Quarq Road Powermeter DUB utilizes the DUB bottom bracket system, which offers broad compatibility across various frame standards. Proper installation of the crankset and bottom bracket is crucial for optimal performance and longevity.
Eines necessàries:
- Clau dinamométrica
- Appropriate bottom bracket tool (specific to your DUB bottom bracket)
- Claus hexagonals (diverses mides)
- Greix
- Desgreixant
Passos d'instal·lació:
- Prepare the Bottom Bracket Shell: Clean and inspect the bicycle's bottom bracket shell. Ensure threads (if applicable) are clean and free of debris. Apply a thin layer of grease to the bottom bracket threads or contact surfaces as per DUB bottom bracket instructions.
- Install the DUB Bottom Bracket: Follow the specific instructions provided with your SRAM DUB bottom bracket for installation. Torque to the specified values.
- Install the Crankset:
- Apply a thin layer of grease to the DUB spindle.
- Slide the drive-side crank arm (with chainrings and power meter) through the bottom bracket.
- Align the non-drive side crank arm onto the spindle.
- Tighten the crank bolt to the manufacturer's specified torque. Refer to the specific torque values provided with your crankset.
- Pairing the Powermeter:
- Ensure the power meter is awake (rotate cranks a few times).
- Refer to your head unit or cycling computer's manual for instructions on pairing a new ANT+ or Bluetooth power meter.
- The power meter's unique ID can usually be found on a sticker on the crank arm or spider.
Imatge: Una imatge detallada view of the SRAM RED D1 Quarq Powermeter spider, showing the integrated power measurement unit.
Operating the Powermeter
Once installed and paired, the Quarq power meter will transmit power data to your compatible head unit. Ensure your head unit is configured to display power, cadence, and other relevant metrics.
Calibration (Zero Offset):
It is recommended to perform a zero offset calibration before each ride for the most accurate power readings. This compensates for any changes due to temperature or installation variations.
- Ensure the bicycle is stationary and the cranks are not under any load.
- Access the calibration function on your head unit (refer to your head unit's manual).
- Initiate the zero offset. The head unit will confirm successful calibration.
Nota: Do not perform a zero offset while pedaling or with any weight on the pedals.
Image: The SRAM RED D1 Quarq Powermeter installed on a bicycle, with a blurred background of cyclists riding, illustrating its intended use.
Manteniment
Regular maintenance will prolong the life and ensure the accuracy of your SRAM RED D1 Quarq Powermeter.
Neteja:
- Clean the crankset and power meter regularly with mild soap and water.
- Avoid high-pressure washing directly on the power meter unit or bottom bracket bearings.
- Assecar bé després de la neteja.
Substitució de la bateria:
The Quarq power meter uses a CR2032 coin cell battery. Battery life varies depending on usage and environmental conditions. Replace the battery when your head unit indicates low battery or when the power meter stops transmitting data.
- Locate the battery cover on the power meter spider.
- Use a coin or appropriate tool to open the battery cover by turning it counter-clockwise.
- Traieu la bateria antiga.
- Insert a new CR2032 battery with the positive (+) side facing outwards.
- Replace the battery cover and turn clockwise until snug. Do not overtighten.
Comprovació de parell d'estrènyer:
Periodically check the crank bolt torque to ensure it remains at the manufacturer's specified setting. Loose crank bolts can lead to creaking or damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No power data on head unit |
|
|
| Lectures de potència inexactes |
|
|
| Creaking noise from crankset |
|
|
Especificacions
| Atribut | Valor |
|---|---|
| Nom de marca | Sram |
| Nom del model | D1 Road Powermeter Dub |
| Número de part | 00.3018.207.170 |
| Mida | 170mm - 48-35 |
| Color | Negre |
| Material | Sintètic |
| Pes de l'article | 2 lliures (aprox. 0.91 kg) |
| Pes del paquet | 1.52 quilos |
| Dimensions de l'article (LxWxH) | 14 x 11 x 4 polzades |
| Tipus esportiu | Ciclisme |
| Components inclosos | Mesuradors de potència |
| Any model | 2019 |
| Data de primera disponibilitat | 7 de febrer de 2019 |
Garantia i Suport
SRAM products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
For technical support, troubleshooting beyond this manual, or warranty claims, please visit the official SRAM support page or contact their authorized service centers.
SRAM oficial Weblloc: www.sram.com
