FR-TEC Simracing Cockpit Instruction Manual

1. Introducció

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FR-TEC Simracing Cockpit. Designed for an immersive driving simulation and esports racing experience, this playseat features a robust steel structure and a comfortable seat made of synthetic leather with breathable fabric. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Informació de seguretat

• Always ensure all bolts and fasteners are securely tightened before use. Regularly check for loose connections.
• Do not exceed the maximum weight capacity of the cockpit.
• Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
• Avoid placing the cockpit in direct sunlight or near heat sources to prevent material degradation.
• Use caution when adjusting components to avoid pinching fingers or other body parts.
• Ensure the cockpit is placed on a stable, level surface to prevent tipping.

3. Contingut del paquet

Abans de començar el muntatge, verifiqueu que tots els components que s'enumeren a continuació siguin presents i no estiguin danyats. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Simracing Seat (Synthetic Leather with Breathable Fabric)
• Steel Frame Structure
• Placa de pedals
• Steering Wheel/Shifter Mount Plate
• Maquinari de muntatge (cargols, femelles, volanderes, claus)
• Manual d'instruccions (Aquest document)

Figura 3.1: Mésview of the FR-TEC Simracing Cockpit components. This image displays the complete cockpit assembly, including the racing seat, the adjustable steering wheel mount, and the pedal plate, providing a visual reference for the main parts.

4. Muntatge i muntatge

Follow these steps carefully to assemble your FR-TEC Simracing Cockpit. It is recommended to have a second person assist with assembly due to the size and weight of some components.

1. Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les sobre una superfície neta i plana. Verifiqueu-ho amb la llista de contingut del paquet.
2. Muntar el marc base: Connect the main steel frame sections using the provided bolts and wrenches. Ensure all connections are snug but do not overtighten until all sections are aligned.
3. Adjunta el seient: Secure the simracing seat to the base frame using the designated mounting points and hardware. Ensure the seat is oriented correctly.
4. Install Pedal Plate: Mount the pedal plate to the front section of the frame. Adjust its angle and distance as desired before fully tightening.
5. Mount Steering Wheel/Shifter Plate: Attach the adjustable steering wheel and shifter mount plate to the central support column. This plate can be adjusted for height and angle.
6. Ajustament final: Once all components are in place and aligned, systematically tighten all bolts and fasteners to ensure a stable and secure structure.

Figura 4.1: Pro lateralfile of the FR-TEC Simracing Cockpit. This view highlights the adjustable nature of the steering wheel mount and pedal plate, crucial for ergonomic setup during assembly.

5. Instruccions de funcionament

The FR-TEC Simracing Cockpit is designed for intuitive use and adjustability to suit various users and racing setups.

• Adjusting Seat Position: The seat may offer forward/backward sliding and recline adjustments. Locate the levers or knobs typically found under the seat or on the side. Adjust to your preferred driving position for comfort and optimal pedal/wheel reach.
• Adjusting Steering Wheel Mount: The steering wheel plate can be adjusted for height and angle. Loosen the adjustment knobs on the central support column, position the plate as desired, and then securely tighten the knobs.
• Adjusting Pedal Plate: The pedal plate's angle and distance from the seat can be adjusted. Loosen the fasteners, set the plate to a comfortable position for your feet, and then re-tighten.
• Mounting Peripherals: Use the pre-drilled holes on the steering wheel plate and pedal plate to securely mount your racing wheel, pedals, and shifter. Ensure all peripherals are firmly attached to prevent movement during intense racing.

Figura 5.1: Tres quarts view of the FR-TEC Simracing Cockpit. This perspective shows the overall ergonomic design and the placement of the adjustable components for a customized racing setup.

6. Manteniment i cura

Proper maintenance will extend the life and preserve the appearance of your FR-TEC Simracing Cockpit.

• Neteja del seient: For the synthetic leather and breathable fabric, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Neteja del marc: The steel frame can be wiped clean with a damp drap. Assequeu-ho bé per evitar que s'oxidi.
• Comprovacions periòdiques: Periodically inspect all bolts, nuts, and connections to ensure they remain tight. Re-tighten as necessary.
• Emmagatzematge: If storing the cockpit for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Figure 6.1: Detail of the seat material. This image shows the texture of the synthetic leather and breathable fabric, highlighting the quality and design of the seating surface.

Figure 6.2: Close-up of the FR-TEC Sprint logo. This image details the embroidered logo on the headrest, showcasing the branding and stitching quality.

7. Solució De Problemes

This section addresses common issues you might encounter with your FR-TEC Simracing Cockpit.

8. Especificacions

Detailed technical specifications for the FR-TEC Simracing Cockpit (Model S7812904).

9. Garantia i Suport

For information regarding warranty coverage, returns, or technical support, please refer to the official FR-TEC website or contact your point of purchase. Specific warranty details are not provided within this manual.

For further assistance, please visit the manufacturer's official support channels.