Introducció
The GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer (Model 58G098) is a versatile garden tool designed for efficient pruning and trimming tasks. This cordless device operates on the GRAPHITE Energy+ 18V Lithium-Ion battery system (battery not included). It combines the functionality of a pole saw for cutting branches and a hedge trimmer for shaping hedges and shrubs, offering extended reach for higher areas.
Informació de seguretat
Llegiu i comprengueu sempre tots els avisos de seguretat, instruccions, il·lustracions i especificacions que s'inclouen amb aquesta eina elèctrica. Si no seguiu totes les instruccions que s'indiquen a continuació, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
- Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection.
- Assegureu-vos que la zona de treball estigui lliure de vianants, nens i mascotes.
- No feu servir l'eina en condicions humides ni en presència de líquids o gasos inflamables.
- Desconnecteu sempre la bateria abans de fer qualsevol ajust, canviar accessoris o guardar l'eina.
- Mantingueu l'eina ben subjectada amb les dues mans durant el funcionament.
- Be aware of falling debris when operating the pole saw or hedge trimmer at height.
- Keep hands and feet away from cutting blades and chains.
- Inspeccioneu l'eina per detectar danys abans de cada ús. No l'utilitzeu si està danyada.
Contingut del paquet
Verifiqueu que hi hagi tots els elements en desempaquetar:
- GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer main unit
- Pole Saw attachment head (8" / 200 mm guide bar)
- Hedge Trimmer attachment head (430 mm cutting width)
- Braç d’extensió
- Corretja d'espatlla
- Manual d'usuari
- Targeta de garantia
- Note: 18V DC Lithium-Ion battery and charger are not included and must be purchased separately.
Configuració
1. Attaching the Extension Arm
The extension arm allows for increased reach. To attach, align the hexagonal end of the extension arm with the corresponding socket on the main unit. Push firmly until it clicks into place. Ensure the connection is secure.
Figure 1: Extension arm connection point.
Description: This image displays a close-up of the tool's main body and the end of the extension pole, highlighting the hexagonal connection mechanism. The red collar on the tool's body indicates the locking point for the extension.
2. Attaching the Pole Saw Head
To attach the pole saw head, align the drive shaft of the saw head with the coupling on the extension arm (or main unit if not using the extension). Push and twist slightly until the head is fully seated and locked. Ensure the locking mechanism is engaged.
Figure 2: Assembled pole saw and hedge trimmer.
Description: This image shows the complete 2-in-1 tool, with the pole saw attachment on the upper part of the image and the hedge trimmer attachment on the lower part. Both are shown with the extension pole, illustrating the full length of the tool.
3. Attaching the Hedge Trimmer Head
Similar to the pole saw head, align the drive shaft of the hedge trimmer head with the coupling on the extension arm (or main unit). Push and twist slightly until the head is fully seated and locked. Verify the locking mechanism is engaged.
4. Instal·lació de la bateria
Insert a charged GRAPHITE Energy+ 18V Lithium-Ion battery into the battery slot on the handle of the main unit. Push until it clicks into place. To remove, press the release button and pull the battery out.
Instruccions de funcionament
Funcionament general
- Before starting, ensure the area is clear and you have a stable footing.
- Subjecteu sempre l'eina fermament amb les dues mans.
- To start the tool, press the safety lock-off button and then squeeze the trigger switch. Release the trigger to stop.
- Utilize the shoulder strap for improved balance and reduced fatigue during extended use.
Using the Pole Saw Attachment
The pole saw is designed for cutting branches up to 8 inches (200 mm) in diameter.
- Ajust de la tensió de la cadena: The pole saw features tool-less chain tensioning. Rotate the red knob to adjust chain tension. The chain should be snug but still able to be pulled freely around the guide bar.
- Lubricació: Ensure the chain oil reservoir is filled before use. The saw chain requires continuous lubrication during operation.
- Tècnica de tall: Position the saw head on the branch, allowing the chain to reach full speed before beginning the cut. Make a small undercut first to prevent pinching, then complete the cut from the top.
Figure 3: Chain tension adjustment knob.
Descripció: Aquesta imatge ofereix un primer pla view of the pole saw head, specifically highlighting the red, circular knob used for tool-less chain tension adjustment. A small lever is also visible, which is part of the tensioning system.
Figure 4: Oil reservoir cap.
Description: This image shows a detailed view of the pole saw's body near the chain, focusing on a small, red cap labeled "MIN" and "MAX", indicating the oil reservoir for chain lubrication.
Using the Hedge Trimmer Attachment
The hedge trimmer is suitable for trimming hedges and shrubs with branches up to 15 mm in diameter.
- Ajust d'angle: The hedge trimmer head can be adjusted to various angles for optimal cutting. Press the red button and rotate the head to the desired angle, then release the button to lock it in place.
- Tècnica de retallada: Use a sweeping motion to cut through hedges. For thicker branches, make several passes. Avoid forcing the blades through dense material.
Figure 5: Hedge trimmer angle adjustment.
Description: This image focuses on the joint of the hedge trimmer attachment, showing a prominent red button that is used to adjust the cutting angle of the blades.
Figure 6: Hedge trimmer blades.
Description: This image provides a detailed close-up of the hedge trimmer's cutting blades, showing their sharp, serrated design.
Manteniment
- Neteja: After each use, clean the tool thoroughly. Remove any debris, sawdust, or sap from the cutting attachments. Use a damp cloth for the main unit.
- Blade/Chain Care:
- For the pole saw chain, ensure it is always sharp and properly tensioned. Replace worn or damaged chains.
- For the hedge trimmer blades, regularly clean and lubricate them with a light machine oil to prevent rust and ensure smooth operation.
- Emmagatzematge: Guardeu l'eina en un lloc sec i segur, fora de l'abast dels nens. Traieu la bateria abans de guardar-la.
- Cura de la bateria: Guardeu les piles en un lloc fresc i sec. No emmagatzemeu les piles completament descarregades durant períodes prolongats.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'inicia | Battery not charged or improperly inserted; Safety lock-off not engaged; Tool malfunction. | Charge battery and ensure it is fully inserted; Press safety lock-off before trigger; Contact service center if problem persists. |
| Pole saw chain not cutting efficiently | Cadena desafilada; Tensió incorrecta de la cadena; Lubricació insuficient. | Esmolar o substituir la cadena; ajustar la tensió de la cadena; omplir el dipòsit d'oli de la cadena. |
| Hedge trimmer blades jamming | Blades are dull or dirty; Attempting to cut branches too thick. | Clean and lubricate blades; Sharpen blades if necessary; Only cut branches within specified diameter (max 15mm). |
| Temps d'execució reduït | Bateria no completament carregada; bateria a punt d'arribar al final de la seva vida útil. | Ensure battery is fully charged before use; Consider replacing battery if it no longer holds a charge. |
Especificacions
| Característica | Especificació |
|---|---|
| Número de model | 58G098 |
| Marca | GRAFIT |
| Font d'alimentació | Battery Powered (18V DC Lithium-Ion) |
| Dimensions del producte | 113 x 23 x 18 cm (muntat) |
| Pole Saw Chain Speed (no load) | 8 m/s |
| Pole Saw Guide Bar Length | 8 polzades (200 mm) |
| Pole Saw Max Working Length | 1.87 m |
| Amplada de tall de la retalladora de bardisses | 430 mm |
| Hedge Trimmer Max Branch Diameter | 15 mm |
| Hedge Trimmer No-Load Speed | 1300 revolutions/min. |
| Material | Grafit |
| Color | Negre, gris |
Garantia i Suport
This GRAPHITE product comes with a 3-year warranty, as stated by the manufacturer. Please refer to the included Warranty Card for detailed terms and conditions.
For technical support, spare parts, or warranty claims, please contact your retailer or the official GRAPHITE service center. Contact information can typically be found on the warranty card or the manufacturer's official weblloc.
For more information about GRAPHITE products and the Energy+ system, visit the official GRAPHITE store: GRAPHITE Store on Amazon.de
