1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.
2. Instruccions de seguretat
- Seguretat elèctrica: La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normatives locals de cablejat. Assegureu-vos que el subministrament elèctric estigui desconnectat abans de la instal·lació o el manteniment.
- Voltage: This product operates on a 230V AC power supply.
- Classificació IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
- Font de llum: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
- Temperatura de funcionament: Ensure the operating environment is within the specified temperature range to prevent damage.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
- Mounting accessories (screws, wall plugs, foam pads)
Figure 2: Included mounting accessories.
4. Configuració i instal·lació
Seguiu aquests passos per a una instal·lació correcta:
- Desconnecteu l'alimentació: Abans de començar, assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
- Preparació de la superfície de muntatge: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
- Col·loqueu el suport de muntatge: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Figura 3: posterior view with mounting bracket.
- Cablejat: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Figure 4: Wiring terminal connection points.
- Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
- Restaura l'alimentació: Switch the main power supply back on.
5. Instruccions de funcionament
The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.
Funcionalitat del sensor de moviment
- The microwave motion detector reacts to movement within a range of up to 6 meters.
- Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
- The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.
Adjusting Sensor Settings (DIP Switches)
The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.
Figure 5: DIP switches for sensor configuration.
Refer to the markings next to the DIP switches for specific settings related to:
- Interval de detecció: Adjusts the maximum distance at which motion is detected.
- Temps de retenció: Sets the duration the light remains on after the last detected motion.
- Daylight Sensor (Lux Level): Determina el nivell de llum ambiental al qual el sensor s'activa. Per exempleample, you can set it to only activate when it's dark.
Nota: Always disconnect power before adjusting DIP switches to avoid electrical hazards.
6. Manteniment
- Neteja: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
- Protecció contra insectes: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
- No hi ha peces reparables per l'usuari: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.
7. Solució De Problemes
If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense font d'alimentació. Cablejat incorrecte. Daylight sensor setting too high. | Comproveu l'interruptor i la connexió d'alimentació. Verify wiring connections (Live, Neutral). Adjust the daylight sensor (Lux) setting on the DIP switches. |
| La llum roman encesa constantment. | Moviment continu detectat. Hold time setting too long. Funcionament del sensor. | Ensure no constant movement in the detection area. Adjust the hold time setting on the DIP switches to a shorter duration. Si el problema persisteix, contacteu amb el servei d'assistència. |
| Light turns on/off too frequently. | Sensitivity too high. Detection range too wide. | Reduce the sensitivity and/or detection range using the DIP switches. |
| El sensor no detecta moviment. | Sensitivity too low. Detection range too narrow. Sensor de bloqueig d'obstacles. Daylight sensor setting too low (light always on). | Increase sensitivity and/or detection range via DIP switches. Ensure no large metal objects or thick walls are directly in front of the sensor. Adjust the daylight sensor (Lux) setting. |
8. Especificacions
| Marca | EMOS |
| Número de model | ZM4328 |
| Dimensions (Diàmetre x Alçada) | 220 mm x 53 mm (approx. 8.66 in x 2.09 in) |
| Pes | 622 grams (aprox. 1.37 lliures) |
| Poder | 15 watts |
| Flux lluminós | 1500 lúmens |
| Temperatura de color | 4000 Kelvin (blanc neutre) |
| Índex de reproducció del color (CRI) | 80 |
| Incandescent Equivalence | 100 watts |
| Voltage | 230 volts de corrent altern |
| Classificació IP | IP54 |
| Material | Acrylonitrile Butadiene Styrene (ABS), Plastic diffuser |
| Característiques especials | Microwave Motion Detector, Energy-saving, Waterproof |
| Classe d'eficiència energètica | E (on new scale from 1.9.2021) |
Figura 6: Dimensions del producte.
Figure 7: Energy Efficiency Label (Class E).
9. Garantia i Suport
Garantia
This EMOS ZM4328 TORI LED Ceiling Light comes with a 3 any de garantia des de la data de compra. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia. La garantia cobreix defectes de materials i fabricació en condicions d'ús normal.
Atenció al client
For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS weblloc.
