1. Introducció
The Vento VIVI-DC is a 10-inch wall mount swivel fan designed to enhance airflow in various indoor spaces. Its unique triaxial design and folding arm allow for versatile positioning and efficient air circulation. This manual provides essential information for the safe installation, operation, and maintenance of your VIVI-DC fan.
Figura 1: Frontal view of the Vento VIVI-DC fan, showcasing its compact design and walnut finish.
2. Instruccions de seguretat
Si us plau, llegiu atentament totes les instruccions de seguretat abans de la instal·lació i el funcionament per evitar lesions o danys.
- Always unplug the fan from the power source before cleaning, maintenance, or when not in use.
- Do not insert fingers or any objects through the fan guard when the fan is operating.
- Ensure the fan is mounted securely to a wall stud or appropriate anchor points to prevent it from falling.
- This fan is designed for indoor use only. Do not use it outdoors or in wet environments.
- Keep the power cord away from heated surfaces and sharp edges.
- Do not operate the fan with a damaged cord or plug. Contact customer support for assistance.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat. .
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Fan Unit (Shield, Blades, Fan Housing)
- Suport de muntatge
- Control remot
- Remote Transmitter Holder
- Alimentació de corrent continu
- Estirar la cadena
- Screw Pack (4 x Screws, 4 x Plastic Wall Plugs, 1 x Pull Chain Extension)
- Screws for Transmitter Holder (2 x Screws)
Figura 2: Explotat view showing all included components and accessories for the VIVI-DC fan.
4. Configuració i instal·lació
Follow these steps for proper installation of your VIVI-DC wall mount fan.
4.1 Eines necessàries (no incloses)
- Trepant
- Tornavís Phillips
- Llapis
- Cinta mètrica
4.2 Muntatge del ventilador
- Seleccioneu la ubicació: Choose a suitable indoor wall location, preferably near a power outlet. Ensure the mounting surface can support the fan's weight (approximately 7 lbs).
- Marca els punts de perforació: Hold the mounting bracket against the wall at the desired height. Use a pencil to mark the positions for the four mounting screws.
- Perforar forats pilot: Drill pilot holes at the marked positions. If mounting into drywall, insert the plastic wall plugs into the pilot holes.
- Suport de muntatge segur: Align the mounting bracket with the pilot holes and secure it to the wall using the four screws provided.
- Connecteu la unitat de ventilador: Carefully attach the fan unit to the secured mounting bracket. Ensure it clicks or locks into place firmly.
- Connectar l'alimentació: Plug the DC power supply into the fan unit and then into a standard wall outlet.
- Install Remote Holder (Optional): Mount the remote transmitter holder to a convenient location using the two smaller screws provided.
Figure 3: Dimensional diagram of the VIVI-DC fan, useful for planning installation space.
5. Funcionament
The VIVI-DC fan can be controlled using the included remote control or the integrated pull chain.
5.1 Control remot
The remote control allows you to power the fan on/off and adjust its speed settings.
Figure 4: The remote control for the VIVI-DC fan, featuring power and speed adjustment buttons.
- Botó d'encendre (⏻): Press once to turn the fan on or off.
- Speed Button (Low Speed): Press to set the fan to low speed.
- Speed Button (High Speed): Press to set the fan to high speed.
5.2 Pull Chain
The pull chain provides an alternative method for basic fan control.
- Pull the chain once to turn the fan on (default to low speed).
- Pull the chain again to switch to high speed.
- Pull the chain a third time to turn the fan off.
5.3 Adjusting Fan Angle
The VIVI-DC fan features a triaxial design and a swivel arm, allowing you to manually adjust the fan head to direct airflow as needed. Gently pivot the fan head and arm to achieve the desired angle.
6. Manteniment
Una neteja regular ajudarà a mantenir el rendiment i l'aspecte del ventilador.
- Desconnecta sempre el ventilador abans de netejar.
- Utilitzeu un suau, damp drap per netejar les superfícies exteriors del ventilador. No utilitzeu productes de neteja abrasius ni dissolvents.
- To clean the fan blades, carefully remove the front grill (if detachable, refer to assembly diagram for guidance). Wipe the blades with a soft cloth. Ensure all parts are dry before reassembling and operating the fan.
- Do not immerse the fan or any electrical components in water or other liquids.
7. Solució De Problemes
If you encounter issues with your VIVI-DC fan, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no s'encén | Sense font d'alimentació La bateria del comandament a distància es va esgotar | Ensure the DC power supply is securely plugged into the fan and a working outlet. Substituïu la bateria del comandament a distància. |
| El ventilador fa soroll o vibra excessivament | Components solts Obstrucció a les pales del ventilador | Ensure the fan unit is securely attached to the mounting bracket. Check for any loose screws. Unplug the fan and carefully remove any debris or obstructions from the blades. |
| El comandament a distància no funciona | Bateria esgotada Obstruction between remote and fan Remote not paired (if applicable) | Substituïu la bateria del comandament a distància. Ensure there is a clear line of sight between the remote and the fan's receiver. Refer to specific pairing instructions if provided with the remote (not typically required for this model). |
8. Especificacions
- Model: VIVI-DC
- Marca: Vento
- Diàmetre del ventilador: 10 polzades
- Dimensions del producte (P x A x A): 10.08" x 12.9" x 14.33"
- Pes de l'article: 7 lliures
- Font d'alimentació: Alimentat amb corrent continu
- Wattage: 12 watts
- Capacitat de flux d'aire: 268 peus cúbics per minut (CFM)
- Nivell de soroll: 48 Decibels (dBa)
- Mètode de control: Remote Control, Pull Chain
- Nombre de nivells de potència: 2 (Baix, Alt)
- Ús interior/exterior: Només interior
- Característiques especials: Adjustable Tilt, Remote Controlled, Folding Arm, Energy Efficient DC Motor
9. Garantia i Suport
The Vento VIVI-DC fan comes with the following warranty:
- Motor de corrent continu: 18-month limited manufacturer's warranty.
- Other Fan Parts: 1-year limited manufacturer's warranty.
For warranty claims, technical support, or replacement parts, please contact Vento customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (VIVI-DC) ready when contacting support.
