WORKPRO Electric Staple Gun and Brad Nailer User Manual

1. Introducció

Thank you for choosing the WORKPRO 3.6V Electric 2-in-1 Staple Gun and Brad Nailer. This tool is designed for various fastening tasks, including upholstery, material repair, woodworking, decoration, furniture, and DIY projects. It is compatible with JT21 staples and BN18 brad nails. Please read this manual thoroughly before operation to ensure safe and efficient use.

Image 1.1: WORKPRO Electric Staple Gun and Brad Nailer with included fasteners and USB cable.

2. Instruccions de seguretat

Always follow basic safety precautions to reduce the risk of personal injury or damage to the tool.

• Llegeix totes les instruccions: Familiaritzeu-vos amb el funcionament i les característiques de seguretat de l'eina abans d'utilitzar-la.
• Protecció ocular: Utilitzeu sempre la protecció ocular adequada (ulleres de seguretat) quan feu servir l'eina.
• Protecció de les mans: Wear gloves to protect hands from potential hazards.
• Àrea de treball: Mantenir l'àrea de treball neta, ben il·luminada i lliure d'obstruccions.
• Peça de treball segura: Ensure the material being worked on is stable and secured.
• Triple Safety Mechanism: The tool features three safety switches. It will only fire when the ON button is activated, the trigger is pressed, and the contact safety device is fully depressed against the workpiece.
• Apagueu quan no estigui en ús: Always turn off the power switch (position "O") when the tool is not in use, during loading/unloading, or during maintenance.
• Eviteu el sobreescalfament: To prevent damage, do not exceed 30 shots per minute. Allow a 1-minute break for every 100 nails fired.
• Correct Fasteners: Only use 1/4"-9/16" JT21 staples and 5/8" 18GA BN18 nails. Using incorrect fasteners (e.g., T50 staples) can damage the tool.
• Not for Hardwoods: This tool is not suitable for professional carpentry or nailing hardwoods.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x WORKPRO 3.6V Electric 2-in-1 Staple Gun and Brad Nailer
• 1000 x JT21 Staples (1/4"-9/16")
• 1000 x BN18 Brad Nails (5/8" 18GA)
• 1 x cable carregador USB

4. Característiques i components del producte

Familiarize yourself with the different parts of your electric staple gun/nailer.

Image 4.1: Labeled components of the WORKPRO Electric Staple Gun, including LED indicator, charge port, ON/OFF switch, trigger, contact safety, nail viewer window, and quick release magazine.

• Interruptor ON / OFF: Controla l'alimentació de l'eina.
• Indicador LED: Displays charging status (Red for low power/charging, Green for full charge/shooting).
• Port de càrrega: Per connectar el cable de càrrega USB.
• Activador: Activates the firing mechanism when safety conditions are met.
• Contact Safety Device: Must be pressed against the workpiece for the tool to fire.
• Ungles Viewer Window: Allows checking the remaining fastener level.
• Cargador de llançament ràpid: For loading staples and nails.

5. Configuració

5.1 Càrrega de la bateria

The electric staple gun is powered by a 3.6V Lithium-Ion battery. Ensure the tool is fully charged before first use.

• Connect the provided USB charging cable to the charge port on the tool.
• Connect the other end of the USB cable to a 5V DC power source (e.g., mobile phone charger, computer USB port, power bank).
• The LED indicator will show Vermell durant la càrrega.
• Charging typically takes 1-2 hours. The LED indicator will turn Verd quan estigui completament carregat.
• A full charge can fire up to 1000 nails/staples.

Image 5.1: Illustration of fast charging capability (1-2 hours) using a 5V DC power source.

Image 5.2: Information on battery capacity (2000mAh 3.6V) and shots per full charge (800-1000).

5.2 Càrrega de grapes i claus

Ensure the power switch is in the "O" (OFF) position before loading fasteners.

Imatge 5.3: acabatview of compatible fasteners: JT21 Staples (1/4"-9/16") and 18GA Brad Nails (5/8").

1. Pull out the magazine cover: Locate the quick release magazine at the bottom of the tool and pull out its cover.
2. Carrega grapes: Place JT21 staples into the magazine with their points facing upwards.
3. Load Nails: Place BN18 nails into the loading side of the magazine with their points facing upwards.
4. Close the magazine cover: Push the magazine cover back until it locks securely into place.

Image 5.4: Visual guide for loading fasteners: pulling out the magazine, placing staples with points up, placing nails with points up, and closing the magazine.

Image 5.5: Emphasizes placing staples with points upwards.

6. Funcionament de l'eina

Follow these steps to operate your WORKPRO Electric Staple Gun/Brad Nailer safely and effectively.

1. Enceneu l'alimentació: Slide the ON/OFF switch to the "I" (ON) position. The LED indicator will turn green if the battery has sufficient charge.
2. Col·loca l'eina: Place the contact safety device firmly against the surface of the object where you intend to fasten.
3. Squeeze the Trigger: While maintaining firm contact with the workpiece, squeeze the trigger to fire a staple or nail.
4. Monitor Fastener Level: Utilitza l'ungla viewer window to check the remaining fasteners and reload as needed.
5. Després de l'ús: Always slide the ON/OFF switch to the "O" (OFF) position when you have finished using the tool or before performing any adjustments or maintenance.

Image 6.1: Illustrates the three steps for safe operation: Power Switch On, Press Contact Safety Device Down Completely, and Squeeze the Trigger to Shoot.

6.1 Aplicacions recomanades

This tool is suitable for various light to medium-duty fastening tasks:

• Upholstery projects
• Material repair (e.g., fabric, paper, leather)
• Woodworking with softwood products
• Decorative tasks
• Furniture assembly and repair
• General DIY projects

Imatge 6.2: Ex.amples of proper use, including pet house construction, DIY wood products, photo frame assembly, and upholstery.

7. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la vostra eina.

• Neteja: Keep the tool clean and free from dust and debris. Use a dry cloth to wipe down the exterior.
• Emmagatzematge: Store the tool in a dry, cool place, away from direct sunlight and moisture. Ensure the power switch is OFF.
• Cura de la bateria: Do not store the tool with a completely discharged battery for extended periods. Charge it periodically if not in use.
• Revista Fastener: Reviseu periòdicament el carregador per si hi ha obstruccions o elements de fixació doblegats que puguin causar encallaments.
• Eviteu l'ús excessiu: Adhere to the recommended firing rate (no more than 30 shots per minute, with a 1-minute break every 100 shots) to prevent motor overheating and potential damage.

8. Solució De Problemes

Si teniu problemes, consulteu els següents problemes i solucions habituals:

9. Especificacions

Technical details for the WORKPRO Electric Staple Gun and Brad Nailer.

Image 9.1: Visual representation of the tool's dimensions and key specifications.

• Model: W125177AE
• Font d'alimentació: 3.6V Lithium-Ion Battery (2000mAh)
• Vol. De càrregatage: 5V DC
• Temps de càrrega: 1-2 hores
• Max Shots per Charge: 800-1000
• Max Shot Rate: 30 shots/minute (with 1-minute break every 100 shots)
• Compatible Staples: JT21 (1/4"-9/16" / 6-14mm)
• Compatible Nails: BN18 (5/8" 18GA / 15mm)
• Pes de l'article: 1.76 lliures (0.8 kg)
• Dimensions del producte: 5.71"L x 5.67"W x 0.1"H (approximately 14.5cm x 14.4cm)
• Material: Estirol acrilonitril butadiè
• Color: Gris

10. Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your purchase or contact WORKPRO customer service. Keep your purchase receipt as proof of purchase.