1. Introducció
Thank you for choosing the PERLESMITH Heavy Duty Full Motion TV Wall Mount. This manual provides essential information and step-by-step instructions for the safe and proper installation, operation, and maintenance of your new TV mount. Designed for versatility and strength, this mount allows you to optimize your viewing experience by providing flexible positioning for your television.
This mount is engineered to fit most 32-60 inch LED, LCD, OLED 4K TVs up to 88lbs, and a sliding full motion version fits most 37-85 inch flat or curved TVs up to 132 lbs. It supports various VESA patterns, ensuring broad compatibility with many television models.
Imatge: Més deview of the PERLESMITH Heavy Duty Full Motion TV Wall Mount components, including the main articulating arm assembly and the sliding wall plate.
2. Informació de seguretat
ADVERTIMENT: Failure to read and follow all instructions, cautions, and warnings in this manual may result in personal injury, property damage, or voiding of your warranty. If you have any questions, please contact PERLESMITH customer service.
- Do not install this product if you cannot understand the instructions or have doubts about the safety of the installation.
- Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
- Feu servir sempre un localitzador de muntants de fusta per localitzar-los amb precisió. No els instal·leu sols en plaques de guix.
- For concrete or brick walls, use appropriate concrete anchors (not always included, verify package contents).
- Do not exceed the maximum weight capacity of 88 lbs (for 32-60 inch TVs) or 132 lbs (for 37-85 inch TVs).
- Verify VESA compatibility (mounting hole patterns) on your TV before installation.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
- Utilitzeu equips de seguretat adequats, inclosa la protecció ocular.
Image: Illustration highlighting the UL certification and rigorous safety testing (6,000 cycles tested, 4X safety tested) of PERLESMITH TV mounts, emphasizing product reliability.
3. Contingut del paquet
Before beginning installation, please check to ensure all parts are included and undamaged. If any parts are missing or defective, contact PERLESMITH customer service for assistance.
El contingut típic del paquet inclou:
- TV Wall Mount Assembly (Articulating Arm and Wall Plate)
- TV Brackets (for attaching to the back of the TV)
- Standard Mounting Hardware Kit (various screws, washers, spacers for TV and wall)
- Nivell de bombolla
- Plantilla de perforació
- Cable Ties (for cable management)
- Manual d'instruccions
Image: A visual representation of the various components included with the PERLESMITH TV wall mount, such as the main mount body, TV brackets, and a bubble level.
4. Configuració i instal·lació
Proper installation is crucial for the safety and stability of your TV. Follow these steps carefully.
4.1 Prepare Your TV
- Col·loca amb cura el televisor cap per avall sobre una superfície suau i neta per evitar ratllades.
- Attach the TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
Image: A visual guide showing the three main steps of installation: attaching brackets to the TV, installing the wall plate, and hanging the TV. It also highlights the included mounting template for ease of use.
4.2 Instal·leu la placa de paret
Determine your wall type (wood stud, concrete, or brick) and follow the corresponding instructions.
- For Wood Stud Walls (16"-24" spacing):
- Use a stud finder to locate the edges and center of the wood studs. Mark the center of the studs.
- Position the drilling template at your desired height, ensuring it is level using the included bubble level. Mark the drill holes.
- Drill pilot holes into the center of the studs at the marked locations.
- Fixeu la placa de paret a la paret amb els cargols i les volanderes. Estrenyeu-la fermament, però no l'estrenyeu massa.
- Per a parets de formigó o maó:
- Position the drilling template at your desired height, ensuring it is level. Mark the drill holes.
- Perforeu forats pilot als llocs marcats.
- Insert concrete anchors into the drilled holes. Ensure they are flush with the wall surface.
- Attach the wall plate to the wall using the lag bolts and washers, screwing them into the concrete anchors. Tighten securely.
Image: A person using a drill to create pilot holes on a wall, with a drilling template and bubble level visible, illustrating the ease of installation.
Image: The TV mount installed on a single wall stud, demonstrating its capability for flexible placement within a room, allowing for optimal viewangles d'ajust.
Image: An illustration of the centering mounting system, showing how the TV can slide left or right by up to 9.25 inches on the wall plate to achieve perfect centering even if the studs are not perfectly aligned with the desired TV position.
4.3 Hang the TV
- With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
- Ensure the TV is securely seated on the wall plate.
- Secure the TV to the wall plate using the safety screws or locking mechanisms provided.
5. Funcionament i ajustos
El suport de paret per a TV de moviment complet PERLESMITH ofereix diversos ajustos per a un ús òptim viewing.
5.1 Ajustament del gir
The articulating arms allow you to swivel your TV up to +60°/-60° (depending on TV size and wall distance) to achieve the best viewangle d'inclinació des de diferents posicions de l'habitació.
5.2 Ajust d'inclinació
Adjust the tilt angle of your TV from +8° to -12° to reduce glare from lights or windows and find the most comfortable viewposició d'ingrés.
5.3 Extensió i retracció
Extend the TV from the wall up to 24.5 inches for a more immersive viewing experience or retract it back to 4 inches to save space when not in use.
Ajust de 5.4 nivells
After installation, you can fine-tune the level of your TV by +/-3° to ensure it is perfectly horizontal.
Image: A split image demonstrating the swivel range (+60°/-60°) and tilt range (+8°/-12°) of the TV mount, allowing for versatile viewangles d'inclinació i reducció de l'enlluernament.
Image: An illustration showing the +/-3° level adjustment capability for perfect horizontal alignment and the extension range of 4.01 to 24.25 inches, creating a "floating TV" effect.
6. Manteniment
Regular maintenance helps ensure the longevity and safe operation of your TV mount.
- Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs. Torneu a apretar-los si cal.
- Moviment: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
7. Solució De Problemes
Si teniu algun problema durant o després de la instal·lació, consulteu els problemes i solucions habituals següents.
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat. | Wall plate not level during installation, or fine-tuning needed. | Use the built-in level adjustment feature (+/-3°) to correct the tilt. Recheck wall plate level if necessary. |
| Mount feels loose or wobbly. | Screws not fully tightened, or incorrect wall anchors used. | Ensure all lag bolts securing the wall plate are fully tightened. Verify correct anchors for your wall type. Do not exceed weight capacity. |
| Difficulty moving the mount. | Joints are stiff, or TV weight is at the upper limit. | Apply a small amount of silicone-based lubricant to the articulating joints. Ensure TV weight is within limits. |
| Falten peces. | Error d'embalatge. | Contact PERLESMITH customer service immediately. |
8. Especificacions
Key technical specifications for your PERLESMITH TV Wall Mount.
| Característica | Especificació |
|---|---|
| Marca | PERLESMITH |
| Tipus de muntatge | Muntatge de paret |
| Tipus de moviment | Articulació / Moviment complet |
| Compatible TV Sizes (Mount 1) | 32-60 polzades |
| Weight Capacity (Mount 1) | Fins a 88 lliures (40 kg) |
| Compatible TV Sizes (Mount 2) | 37-85 polzades |
| Weight Capacity (Mount 2) | Fins a 132 lliures (60 kg) |
| VESA Compatibility (Mount 1) | 100x100mm a 400x400mm |
| VESA Compatibility (Mount 2) | 200x100mm a 600x400mm |
| Extensió des de la paret | 4 polzades (retret) a 24.5 polzades (estès) |
| Angle de gir | +/- 60° (max, depends on TV size) |
| Angle d'inclinació | +8° a -12° |
| Ajust de nivell | +/- 3 ° |
| Dimensions de la placa de paret | 11.81 x 2.75 inches (for the 88lbs mount) |
| Tipus de paret compatibles | 16"-24" Wood Studs, Concrete, Brick |
9. Garantia i atenció al client
PERLESMITH is committed to providing high-quality products and excellent customer service. For warranty information, technical assistance, or any questions regarding your TV mount, please contact PERLESMITH customer support through the retailer's platform or the official PERLESMITH weblloc.
Please have your product model number (PSMFK12 / PSLF6) and purchase details ready when contacting support.
