Manual d'usuari del comandament a distància sense fil TOWILD per a llums de bicicleta

Introducció

This manual provides detailed instructions for the installation, pairing, operation, and maintenance of your TOWILD Wireless Remote Control. This remote control is designed to enhance the usability of compatible TOWILD bike lights, allowing for convenient mode switching and brightness adjustments while riding. Please read this manual thoroughly before use to ensure proper function and safety.

Producte acabatview

The TOWILD Wireless Remote Control is a compact, handlebar-mounted device that provides remote access to your TOWILD bike light's functions. It features three distinct buttons, each with single-click and long-press functionalities, to control various lighting modes and brightness levels.

Imatge 1: Davant view of the TOWILD Wireless Remote Control. This image displays the compact, circular design of the remote with its three distinct control buttons, ready for handlebar mounting.

Compatible Bike Lights:

• TOWILD CL1200
• TOWILD CL600
• TOWILD CL900
• TOWILD BR1000
• TOWILD CL1200Pro
• TOWILD CL1000

Especificacions

Configuració

1. Mounting the Remote Control

The remote control is designed for handlebar mounting. Position the remote control on your bicycle's handlebars in a location that is easily accessible and comfortable for your thumb or finger while riding. Ensure it is securely fastened to prevent movement during use.

Imatge 2: The TOWILD Wireless Remote Control securely mounted on a bicycle handlebar. This image demonstrates the optimal placement for easy access during cycling.

2. Battery Installation/Check

The remote control comes with a CR2 battery pre-installed. If the remote is unresponsive, check or replace the battery. Refer to the maintenance section for battery replacement instructions.

Instruccions d'aparellament

To use the wireless remote control, it must first be paired with your compatible TOWILD bike light. Follow these steps:

1. Ensure your TOWILD bike light is turned on.
2. On the bike light, press and hold the light button for 3 seconds to enter pairing state. The main light will flash, and the button indicator light will be solid red.
3. While the bike light is in pairing state, long press any one of the keys on the remote control.
4. The bike light will indicate successful pairing by turning off its main light and the red indicator light.

Note: During the matching process, the long press of the remote control key should not exceed 5 seconds. If the remote control does not pair, ensure it is within close proximity to the bike light and check the remote control's battery. If the remote control lights up when a button is pressed, the battery is likely functional.

Imatge 3: A visual representation of the remote control pairing process with a TOWILD bike light. This image highlights the remote's position relative to the light during pairing.

One remote control can be paired with multiple bike lights, and the pairing is permanent. This means you can control the same light with multiple remotes if desired.

Instruccions de funcionament

The remote control features three buttons, each with distinct functions based on single-click or long-press actions.

Imatge 4: A hand demonstrating the operation of the TOWILD Wireless Remote Control, showing the illuminated buttons during use.

Funcions del botó:

• Button 1 (Left Arrow Icon):
  • Un sol clic: Switches between warning and lighting modes.
  • Premsa llarga (0.5s): Switches between Smart and Manual modes on the bike light.
• Button 2 (Right Arrow Icon):
  • Un sol clic: Switches between brightness gears/levels.
  • Premsa llarga (0.5s): Turns the bike light ON.
  • Premsa llarga (0.8s): Turns the bike light OFF.
• Button 3 (Lightning Bolt Icon):
  • Un sol clic: Activates the brightest mode immediately.
  • Premsa llarga: Enters the highest brightness mode. Release the button to return to the previous brightness level.

Nota important: Some bike light models may require the light to be in "Smart Mode" to fully utilize the remote's on/off functionality. If the light is completely off to save battery, you may need to manually press the button on the light once to put it into standby mode before the remote can turn it on.

Manteniment

Neteja:

Wipe the remote control with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the surface or internal components.

Substitució de la bateria:

The remote control uses one CR2 battery. When the remote's responsiveness decreases or it fails to pair, it may be time to replace the battery. To replace:

1. Carefully open the battery compartment, usually located on the underside or side of the remote.
2. Traieu la bateria CR2 antiga.
3. Introduïu una pila CR2 nova, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu el compartiment de la bateria de manera segura.
5. Test the remote control by attempting to pair it or operate a paired light.

Elimineu les piles velles d'acord amb la normativa local.

Resolució de problemes

• El comandament a distància no respon:
  • Comproveu la bateria. Substituïu-la si cal.
  • Ensure the remote is within range of the bike light.
  • Re-attempt the pairing process as described in the "Pairing Instructions" section.
• Light not turning on/off with remote:
  • Verify that the bike light is in "Smart Mode" if required by your specific light model.
  • If the light is completely powered off, manually press the light's button once to put it into standby mode, then try the remote.
  • Confirm successful pairing.
• Buttons not performing expected function:
  • Ensure you are using the correct single-click or long-press duration for the desired action. Refer to "Operating Instructions".
  • Re-pair the remote with the light.

Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your TOWILD bike light or visit the official TOWILD weblloc. Conserveu el rebut de compra per a reclamacions de garantia.

Manufacturer: TOWILD

Data de primera disponibilitat: 22 d'agost de 2022